Requester ID should use the rootport devfn and it should be always 0. But, devfn argument in these 2 functions can be rootport or endpoint. It causes the issue when accessing configuration register from multi-functions PCIe devices. Tested on Ethernet adapter card with multi-functions. Signed-off-by: Ley Foon Tan <lftan@xxxxxxxxxx> --- drivers/pci/host/pcie-altera.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c index e5dda38..f05180f 100644 --- a/drivers/pci/host/pcie-altera.c +++ b/drivers/pci/host/pcie-altera.c @@ -57,6 +57,7 @@ #define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn)) #define TLP_HDR_SIZE 3 #define TLP_LOOP 500 +#define RP_DEVFN 0 #define INTX_NUM 4 @@ -233,7 +234,7 @@ static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn, else headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGRD1); - headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, devfn), + headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN), TLP_READ_TAG, byte_en); headers[2] = TLP_CFG_DW2(bus, devfn, where); @@ -253,7 +254,7 @@ static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn, else headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGWR1); - headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, devfn), + headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN), TLP_WRITE_TAG, byte_en); headers[2] = TLP_CFG_DW2(bus, devfn, where); -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
