On 11/05/2015 12:12 AM, Gavin Shan wrote:
The pdn (struct pci_dn) instances are allocated from memblock or
bootmem when creating PCI controller (hoses) in setup_arch(). PCI
hotplug, which will be supported by proceeding patches, release
PCI device nodes and their corresponding pdn on unplugging event.
The memory chunks for pdn instances allocated from memblock or
bootmem are hard to reused after being released.
This delays creating pdn in core_initcall_sync(eeh_dev_phb_init) so
that they are allocated from slab. In turn, the memory chunks for
them can be reused after being released without problem. Since the
pdn and eeh_dev has same life cycle, the eeh_dev is created when
pdn is populated. We needn't create eeh_dev with another initcall.
The time to create PHB PEs is delayed a bit from core_initcall() to
core_initcall_sync().
Why is delayed? I mean what needs to be called before eeh_dev_phb_init()?
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
arch/powerpc/include/asm/eeh.h | 2 +-
arch/powerpc/include/asm/ppc-pci.h | 2 --
arch/powerpc/kernel/eeh_dev.c | 19 ++++-------------
arch/powerpc/kernel/pci_dn.c | 20 ++++++++++++++++--
arch/powerpc/platforms/maple/pci.c | 34 ++++++++++++++++++------------
arch/powerpc/platforms/pasemi/pci.c | 3 ---
arch/powerpc/platforms/powermac/pci.c | 38 +++++++++++++++++++++-------------
arch/powerpc/platforms/powernv/pci.c | 3 ---
arch/powerpc/platforms/pseries/setup.c | 6 +-----
9 files changed, 69 insertions(+), 58 deletions(-)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index c5eb86f..27352f4 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -268,7 +268,7 @@ void eeh_pe_restore_bars(struct eeh_pe *pe);
const char *eeh_pe_loc_get(struct eeh_pe *pe);
struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
-void *eeh_dev_init(struct pci_dn *pdn, void *data);
+struct eeh_dev *eeh_dev_init(struct pci_dn *pdn);
void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
int eeh_init(void);
int __init eeh_ops_register(struct eeh_ops *ops);
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 8753e4e..0f73de0 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -39,8 +39,6 @@ void *pci_traverse_device_nodes(struct device_node *start,
void *traverse_pci_dn(struct pci_dn *root,
void *(*fn)(struct pci_dn *, void *),
void *data);
-
-extern void pci_devs_phb_init(void);
extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
/* From rtas_pci.h */
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index aabba94..1c4bc35 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -44,14 +44,13 @@
/**
* eeh_dev_init - Create EEH device according to OF node
* @pdn: PCI device node
- * @data: PHB
*
* It will create EEH device according to the given OF node. The function
* might be called by PCI emunation, DR, PHB hotplug.
*/
-void *eeh_dev_init(struct pci_dn *pdn, void *data)
+struct eeh_dev *eeh_dev_init(struct pci_dn *pdn)
{
- struct pci_controller *phb = data;
+ struct pci_controller *phb = pdn->phb;
struct eeh_dev *edev;
/* Allocate EEH device */
@@ -68,7 +67,7 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
edev->phb = phb;
INIT_LIST_HEAD(&edev->list);
- return NULL;
+ return edev;
}
/**
@@ -80,16 +79,8 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
*/
void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
{
- struct pci_dn *root = phb->pci_data;
-
/* EEH PE for PHB */
eeh_phb_pe_create(phb);
-
- /* EEH device for PHB */
- eeh_dev_init(root, phb);
-
- /* EEH devices for children OF nodes */
- traverse_pci_dn(root, eeh_dev_init, phb);
}
/**
@@ -105,9 +96,7 @@ static int __init eeh_dev_phb_init(void)
list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
eeh_dev_phb_init_dynamic(phb);
- pr_info("EEH: devices created\n");
-
return 0;
}
-core_initcall(eeh_dev_phb_init);
+core_initcall_sync(eeh_dev_phb_init);
May be remove core_initcall_sync and call eeh_dev_phb_init_dynamic()
directly from the loop in pci_devs_phb_init()?
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index aa4110f..581612c 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -272,8 +272,11 @@ struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
const __be32 *regs;
struct device_node *parent;
struct pci_dn *pdn;
+#ifdef CONFIG_EEH
+ struct eeh_dev *edev;
+#endif
- pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
+ pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
if (pdn == NULL)
return NULL;
dn->data = pdn;
@@ -302,6 +305,15 @@ struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
/* Extended config space */
pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
+ /* Create EEH device */
+#ifdef CONFIG_EEH
+ edev = eeh_dev_init(pdn);
+ if (!edev) {
+ kfree(pdn);
+ return NULL;
+ }
+#endif
+
/* Attach to parent node */
INIT_LIST_HEAD(&pdn->child_list);
INIT_LIST_HEAD(&pdn->list);
@@ -486,15 +498,19 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
* pci device found underneath. This routine runs once,
* early in the boot sequence.
*/
-void __init pci_devs_phb_init(void)
+static int __init pci_devs_phb_init(void)
{
struct pci_controller *phb, *tmp;
/* This must be done first so the device nodes have valid pci info! */
list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
pci_devs_phb_init_dynamic(phb);
+
+ return 0;
}
+core_initcall(pci_devs_phb_init);
+
static void pci_dev_pdn_setup(struct pci_dev *pdev)
{
struct pci_dn *pdn;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index a923230..a2f89e6 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -568,6 +568,26 @@ void maple_pci_irq_fixup(struct pci_dev *dev)
DBG(" <- maple_pci_irq_fixup\n");
}
+static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions hopefully.
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+
void __init maple_pci_init(void)
{
struct device_node *np, *root;
@@ -605,19 +625,7 @@ void __init maple_pci_init(void)
if (ht && maple_add_bridge(ht) != 0)
of_node_put(ht);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions hopefully.
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->dn;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
+ ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
This seems an unrelated change.
What is this pcibios_root_bridge_prepare()? How come you do not need one
for the powernv platform but do need for others? Same question about powermac.
/* Tell pci.c to not change any resource allocations. */
pci_add_flags(PCI_PROBE_ONLY);
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index f3a68a0..10c4e8f 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -229,9 +229,6 @@ void __init pas_pci_init(void)
of_node_get(np);
of_node_put(root);
-
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
}
void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 59ab16f..6e06c3b 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -878,6 +878,29 @@ void pmac_pci_irq_fixup(struct pci_dev *dev)
#endif /* CONFIG_PPC32 */
}
+#ifdef CONFIG_PPC64
+static int pmac_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions for now. We should do something better in the
+ * future though
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+#endif /* CONFIG_PPC64 */
+
void __init pmac_pci_init(void)
{
struct device_node *np, *root;
@@ -914,20 +937,7 @@ void __init pmac_pci_init(void)
if (ht && pmac_add_bridge(ht) != 0)
of_node_put(ht);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions for now. We should do something better in the
- * future though
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->dn;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
+ ppc_md.pcibios_root_bridge_prepare = pmac_pci_root_bridge_prepare;
/* pmac_check_ht_link(); */
#else /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index fa99daf..d8832ea 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -807,9 +807,6 @@ void __init pnv_pci_init(void)
for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
pnv_pci_init_ioda2_phb(np);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
/* Configure IOMMU DMA hooks */
set_pci_dma_ops(&dma_iommu_ops);
}
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 6c274cb..bdf93a1 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -262,11 +262,8 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
case OF_RECONFIG_ATTACH_NODE:
parent = of_get_parent(np);
pdn = parent ? PCI_DN(parent) : NULL;
- if (pdn) {
- /* Create pdn and EEH device */
+ if (pdn)
pci_add_device_node_info(pdn->phb, np);
- eeh_dev_init(PCI_DN(np), pdn->phb);
- }
of_node_put(parent);
break;
@@ -489,7 +486,6 @@ static void __init find_and_init_phbs(void)
}
of_node_put(root);
- pci_devs_phb_init();
/*
* PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
--
Alexey
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
