Changes since v1 -> v2 Removed the changes in pci_id.h. Kept all the vendor ids in quirks.c Reading or Writing of PCI VPD data causes system panic. We saw this problem by running "lspci -vvv" in the beginning. However this can be easily reproduced by running cat /sys/bus/devices/XX../vpd VPD length has been set as 32768 by default. Accessing vpd will trigger read/write of 32k. This causes problem as we could read data beyond the VPD end tag. Behaviour is un- predictable when this happens. I see some other adapter doing similar quirks(commit id bffadffd43d438c3143b8d172a463de89345b836) I see there is an attempt to fix this right way. https://patchwork.ozlabs.org/patch/534843/ or https://lkml.org/lkml/2015/10/23/97 Tried to fix it this way, but problem is I dont see the proper start/end TAGs(at least for this adapter) at all. The data is mostly junk or zeros. This patch fixes the issue by setting the vpd length to 0. Signed-off-by: Babu Moger <babu.moger@xxxxxxxxxx> --- drivers/pci/quirks.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 38 insertions(+), 0 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b03373f..f739e47 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2123,6 +2123,44 @@ static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); /* + * A read/write to sysfs entry ('/sys/bus/pci/devices/<id>/vpd') + * will dump 32k of data. The default length is set as 32768. + * Reading a full 32k will cause an access beyond the VPD end tag. + * The system behaviour at that point is mostly unpredictable. + * Also I dont believe vendors have implemented this VPD headers properly. + * Atleast I dont see it in following megaraid sas controller. + * That is why adding the quirk here. + */ +static void quirk_megaraid_sas_limit_vpd(struct pci_dev *dev) +{ + if (dev->vpd) + dev->vpd->len = 0; +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, + quirk_megaraid_sas_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, + quirk_megaraid_sas_limit_vpd); + +/* * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the * VPD end tag will hang the device. This problem was initially * observed when a vpd entry was created in sysfs -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
