On Thu, Nov 05, 2015 at 12:12:00AM +1100, Gavin Shan wrote: >This series of patches rebases on powerpc/next branch, plus below additional >patches: > > https://patchwork.ozlabs.org/patch/534804/ (PATCH[1/1] Andrew's EEH fix) > https://patchwork.ozlabs.org/patch/534154/ (PATCH[7/7] Richard's SRIOV Rework) > commit 3b0e21e Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next > As asked by Alexey, here is the repo on github: https://github.com/gwshan/pnv-pci-hotplug.git >The series of patches intend to support PCI slot for PowerPC PowerNV platform, >which is running on top of skiboot firmware. The patchset requires corresponding >changes from skiboot firmware, which is sent to skiboot@xxxxxxxxxxxxxxxx >for review. The PCI slots are exposed by skiboot with device node properties, >and kernel utilizes those properties to populated PCI slots accordingly. > >The original PCI infrastructure on PowerNV platform can't support hotplug >because the PE is assigned during PHB fixup time, which is called for once >during system boot time. For this, the PCI infrastructure on PowerNV platform >has been reworked for a lot. After that, the PE and its corresponding resources >(IODT, M32DT, M64 segments, DMA32 and bypass window) are assigned upon updating >PCI bridge's resources, which might decide PE# assigned to the PE (e.g. M64 >resources, on P8 strictly speaking). Each PE will maintain a reference count, >which is (number of child PCI devices + 1). That indicates when last child PCI >device leaves the PE, the PE and its included resources will be relased and put >back into free pool again. With this design, the PE will be released when EEH PE >is released. PATCH[1 - 27] are related to this part. > >>From skiboot perspective, PCI slot is providing (hot/fundamental/complete) >resets to EEH. The kernel gets to know if skiboot supports various reset on one >particular PCI slot through device-tree node. If it does, EEH will utilize the >functionality provided by skiboot. Besides, the device-tree nodes have to change >in order to support PCI hotplug. For example, when one PCI adapter inserted to >one slot, its device-tree node should be added to the system dynamically. Conversely, >the device-tree node should be removed from the system when the PCI adapter is going >to be offline. Since pci_dn and eeh_dev have same life cyle as PCI device nodes, >they should be added/removed accordingly during PCI hotplug. PATCH[28 - 43] are >doing the related work. > >The OF driver is changed to support unflattening FDT blob for sub-stree, which >is covered by PATCH[44 - 49]. > >The last one, PATCH[50], is the standalone PCI hotplug driver for PowerPC PowerNV >platform. > >Changelog >========= >v7: > * Reworked revision to some extent. > * Rebased to powerpc/next repository. > * Reorder/split/merge/drop according - Alexey. > * Defined macros and use array to track IO/M32/M64/DMA32 segments - Alexey. > * Merged 3 files to one for the hotplug driver - Alexey. > * As part of OPAL API, defined macros for PCI slot power state, hotplug > message type. Defined macros for PCI slot power confirmed state in > hotplug driver. > * Misc comments from Alexey. > * Reworked unflatten_dt_node() to avoid recursive function calls. > * Use EXPORT_SYMBOL_GPL() and document function's input/output - Rob/Frank. >v6: > * Patch reorder, split, squash - Alexey. > * Minor coding style - Alexey. > * Better function names for pcibios_{add,remove}_pci_devices - Bjorn > * Replace pr_warn() with dev_warn() in PowerNV hotplug driver - Bjorn > * Concurrent depth as parameter passed to __unflatten_dt_node() - Grant / Alexey > * Replace overlay with of_changeset - Grant >v5: > * Rebased to 4.1.rc6 and some unmerged patches as below: > Alexey's DDW patchset (v11); > Gavin's EEH error injection support (in mpe's next branch); > Richard's EEH cleanup patches (in mpe's next branch); > Richard's EEH support for VF (v7); > Gavin's misc EEH fixes for 4.2; > * The revision bases on skiboot corresponding patches (v7): > https://patchwork.ozlabs.org/patch/480437/ > * Utilize OF overlay to update device-tree with help of newly introduced > OPAL API opal_get_overlay_dt(). > * Split patches for easy review according to aik's comments. > * Fix coding style from checkpatchc.pl as pointed by aik. > * Code cleanup and misc fixup according to aik's input. >v4: > * Rebased to 4.1.RC1 > * Added API to unflatten FDT blob to device node sub-tree, which is attached > the indicated parent device node. The original mechanism based on formatted > string stream has been dropped. > * The PATCH[v3 09/21] ("powerpc/eeh: Delay probing EEH device during hotplug") > was picked up sent to linux-ppc@ separately for review as Richard's "VF EEH > Support" depends on that. >v3: > * Rebased to 4.1.RC0 > * PowerNV PCI infrasturcture is total refactored in order to support PCI > hotplug. The PowerNV hotplug driver is also reworked a lot because of > the changes in skiboot in order to support PCI hotplug. > >Gavin Shan (50): > PCI: Add pcibios_setup_bridge() > powerpc/pci: Override pcibios_setup_bridge() > powerpc/pci: Cleanup on struct pci_controller_ops > powerpc/powernv: Cleanup on pnv_pci_ioda_controller_ops > powerpc/powernv: Drop pnv_ioda_setup_dev_PE() > powerpc/powernv: Drop phb->bdfn_to_pe() > powerpc/powernv: Reorder fields in struct pnv_phb > powerpc/powernv: Rename PE# fields in struct pnv_phb > powerpc/powernv: Fix initial IO and M32 segmap > powerpc/powernv: Simplify pnv_ioda_setup_pe_seg() > powerpc/powernv: IO and M32 mapping based on PCI device resources > powerpc/powernv: Track M64 segment consumption > powerpc/powernv: Rename M64 related functions > powerpc/powernv: M64 support on P7IOC > powerpc/powernv: Rename pnv_pci_ioda_setup_dma_pe() > powerpc/powernv: Define PNV_IODA1_DMA32_SEGSIZE > powerpc/powernv: Avoid calculating DMA32 segments on PHB3 > powerpc/powernv: Remove DMA32 PE list > powerpc/powernv: Track DMA32 segment consumption > powerpc/powernv: Improve DMA32 segment calculation > powerpc/powernv: Increase PE# capacity > powerpc/powernv: Introduce pnv_ioda_init_pe() > powerpc/powernv: Use PE instead of number during setup and release > powerpc/powernv: Allocate PE# in reverse order > powerpc/powernv: Reserve PE for root bus > powerpc/powernv: Create PEs at PCI hot plugging time > powerpc/powernv: Dynamically release PEs > powerpc/pci: Rename pcibios_{add,remove}_pci_devices() > powerpc/pci: Rename pcibios_find_pci_bus() > powerpc/pci: Move pci_find_bus_by_node() around > powerpc/pci: Export pci_add_device_node_info() > powerpc/pci: Introduce pci_remove_device_node_info() > powerpc/pci: Export pci_traverse_device_nodes() > powerpc/pci: Delay populating pdn > powerpc/pci: Don't scan empty slot > powerpc/pci: Update bridge windows on PCI plug > powerpc/powernv: Simplify pnv_eeh_reset() > powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus() > powerpc/powernv: Fundamental reset in pnv_pci_reset_secondary_bus() > powerpc/powernv: Support PCI slot ID > powerpc/powernv: Use firmware PCI slot reset infrastructure > powerpc/powernv: Functions to get/set PCI slot status > powerpc/powernv: Select OF_DYNAMIC > drivers/of: Split unflatten_dt_node() > drivers/of: Avoid recursively calling unflatten_dt_node() > drivers/of: Rename unflatten_dt_node() > drivers/of: Specify parent node in of_fdt_unflatten_tree() > drivers/of: Return allocated memory from of_fdt_unflatten_tree() > drivers/of: Export OF changeset functions > PCI/hotplug: PowerPC PowerNV PCI hotplug driver > > MAINTAINERS | 6 + > arch/powerpc/include/asm/eeh.h | 2 +- > arch/powerpc/include/asm/opal-api.h | 17 +- > arch/powerpc/include/asm/opal.h | 8 +- > arch/powerpc/include/asm/pci-bridge.h | 25 +- > arch/powerpc/include/asm/pnv-pci.h | 7 + > arch/powerpc/include/asm/ppc-pci.h | 8 +- > arch/powerpc/kernel/eeh_dev.c | 19 +- > arch/powerpc/kernel/eeh_driver.c | 12 +- > arch/powerpc/kernel/pci-common.c | 16 +- > arch/powerpc/kernel/pci-hotplug.c | 47 +- > arch/powerpc/kernel/pci_dn.c | 85 +- > arch/powerpc/platforms/maple/pci.c | 34 +- > arch/powerpc/platforms/pasemi/pci.c | 3 - > arch/powerpc/platforms/powermac/pci.c | 38 +- > arch/powerpc/platforms/powernv/Kconfig | 1 + > arch/powerpc/platforms/powernv/eeh-powernv.c | 173 ++-- > arch/powerpc/platforms/powernv/opal-wrappers.S | 4 + > arch/powerpc/platforms/powernv/pci-ioda.c | 1251 +++++++++++++++--------- > arch/powerpc/platforms/powernv/pci.c | 92 +- > arch/powerpc/platforms/powernv/pci.h | 62 +- > arch/powerpc/platforms/pseries/msi.c | 4 +- > arch/powerpc/platforms/pseries/pci_dlpar.c | 32 - > arch/powerpc/platforms/pseries/setup.c | 8 +- > drivers/of/dynamic.c | 65 +- > drivers/of/fdt.c | 378 ++++--- > drivers/of/of_private.h | 2 + > drivers/of/overlay.c | 8 +- > drivers/of/unittest.c | 6 +- > drivers/pci/hotplug/Kconfig | 12 + > drivers/pci/hotplug/Makefile | 3 + > drivers/pci/hotplug/pnv_php.c | 866 ++++++++++++++++ > drivers/pci/hotplug/rpadlpar_core.c | 8 +- > drivers/pci/hotplug/rpaphp_core.c | 4 +- > drivers/pci/hotplug/rpaphp_pci.c | 4 +- > drivers/pci/setup-bus.c | 5 + > include/linux/of_fdt.h | 5 +- > include/linux/pci.h | 1 + > 38 files changed, 2389 insertions(+), 932 deletions(-) > create mode 100644 drivers/pci/hotplug/pnv_php.c > >-- >2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
