On 10/29/2015 08:48 PM, Wei Yang wrote:
On Thu, Oct 29, 2015 at 05:22:54PM -0500, Bjorn Helgaas wrote:
ines: 115
From: Alexander Duyck <aduyck@xxxxxxxxxxxx>
The enumeration path should leave NumVFs set to zero. But after
4449f079722c ("PCI: Calculate maximum number of buses required for VFs"),
we call virtfn_max_buses() in the enumeration path, which changes NumVFs.
This NumVFs change is visible via lspci and sysfs until a driver enables
SR-IOV.
Iterate from TotalVFs down to zero so NumVFs is zero when we're finished
computing the maximum number of buses. Validate offset and stride in
the loop, so we can test it at every possible NumVFs setting. Rename
virtfn_max_buses() to compute_max_vf_buses() to hint that it does have a
side effect of updating iov->max_VF_buses.
[bhelgaas: changelog, rename, allow numVF==1 && stride==0, rework loop,
reverse sense of error path]
Fixes: 4449f079722c ("PCI: Calculate maximum number of buses required for VFs")
Based-on-patch-by: Ethan Zhao <ethan.zhao@xxxxxxxxxx>
Signed-off-by: Alexander Duyck <aduyck@xxxxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/pci/iov.c | 41 ++++++++++++++++++++++-------------------
1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 0cdb2d1..1b1acc2 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -54,24 +54,29 @@ static inline void pci_iov_set_numvfs(struct pci_dev *dev, int nr_virtfn)
* The PF consumes one bus number. NumVFs, First VF Offset, and VF Stride
* determine how many additional bus numbers will be consumed by VFs.
*
- * Iterate over all valid NumVFs and calculate the maximum number of bus
- * numbers that could ever be required.
+ * Iterate over all valid NumVFs, validate offset and stride, and calculate
+ * the maximum number of bus numbers that could ever be required.
*/
-static inline u8 virtfn_max_buses(struct pci_dev *dev)
+static int compute_max_vf_buses(struct pci_dev *dev)
{
struct pci_sriov *iov = dev->sriov;
- int nr_virtfn;
- u8 max = 0;
- int busnr;
+ int nr_virtfn, busnr, rc = 0;
- for (nr_virtfn = 1; nr_virtfn <= iov->total_VFs; nr_virtfn++) {
+ for (nr_virtfn = iov->total_VFs; nr_virtfn; nr_virtfn--) {
Hmm... I agree to iterate the nr_virtfn from total_VFs to 0, which keep the
original logic, before my patch.
pci_iov_set_numvfs(dev, nr_virtfn);
+ if (!iov->offset || (nr_virtfn > 1 && !iov->stride)) {
^^^
Should be this?
if (!iov->offset || (iov->total_VFs > 1 && !iov->stride))
The problem is the spec says stride and offset can change depending on
the value of NumVFs. We end up testing all values from TotalVFs to 1.
The spec states that stride is unused if NumVFs is 1, not TotalVFs.
+ rc = -EIO;
+ goto out;
+ }
+
busnr = pci_iov_virtfn_bus(dev, nr_virtfn - 1);
- if (busnr > max)
- max = busnr;
+ if (busnr > iov->max_VF_buses)
+ iov->max_VF_buses = busnr;
}
- return max;
+out:
+ pci_iov_set_numvfs(dev, 0);
+ return rc;
}
static struct pci_bus *virtfn_add_bus(struct pci_bus *bus, int busnr)
@@ -384,7 +389,7 @@ static int sriov_init(struct pci_dev *dev, int pos)
int rc;
int nres;
u32 pgsz;
- u16 ctrl, total, offset, stride;
+ u16 ctrl, total;
struct pci_sriov *iov;
struct resource *res;
struct pci_dev *pdev;
@@ -410,11 +415,6 @@ static int sriov_init(struct pci_dev *dev, int pos)
found:
pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl);
- pci_write_config_word(dev, pos + PCI_SRIOV_NUM_VF, 0);
- pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset);
- pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride);
- if (!offset || (total > 1 && !stride))
- return -EIO;
Original code will return when it found this condition, so that we don't need
to bother to do those initialization and then fall back.
So I suggest to keep it here.
The problem is this code isn't valid as per the spec. The offset and
stride are considered unused when numvfs is 0. That is why this has to
be dropped.
pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &total);
if (!total)
@@ -456,8 +456,6 @@ found:
iov->nres = nres;
iov->ctrl = ctrl;
iov->total_VFs = total;
- iov->offset = offset;
- iov->stride = stride;
iov->pgsz = pgsz;
iov->self = dev;
pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap);
@@ -474,10 +472,15 @@ found:
dev->sriov = iov;
dev->is_physfn = 1;
- iov->max_VF_buses = virtfn_max_buses(dev);
+ rc = compute_max_vf_buses(dev);
+ if (rc)
+ goto fail_max_buses;
return 0;
+fail_max_buses:
+ dev->sriov = NULL;
The dev->sriov is allocated with kzalloc(), seems we forget to release it?
No, if you check at the end of the function we release it via a kfree(iov).
+ dev->is_physfn = 0;
failed:
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
res = &dev->resource[i + PCI_IOV_R
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
