On Thu, Oct 29, 2015 at 9:32 AM, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> Hi Alex,
>
> Thanks, this definitely clears up some problems. Two minor questions
> below.
>
> On Tue, Oct 27, 2015 at 01:52:27PM -0700, Alexander Duyck wrote:
>> >From what I can tell there were several errors in the sriov_enable
>> exception handling path. Below is a brief list of what I believe I am
>> fixing:
>>
>> 1. If pcibios_enable_sriov failed, we returned without disabling SR-IOV on
>> the device.
>> 2. If virtfn_add failed we didn't call pcibios_disable_sriov to undo
>> pcibios_enable_sriov.
>> 3. We were resetting numvfs to 0 before a second had passed for the VFs to
>> quiesce.
>> 4. Minor coding style issues for white space and for assignment in
>> conditional check.
>>
>> Beyond addressing these 4 issues there were also 2 other minor issues in
>> that retval was a redundant variable with rc, and j wasn't actually needed
>> as we could simply reverse the loop we were running when setting up i. As
>> such I have updated the code to address those two items.
>>
>> Signed-off-by: Alexander Duyck <aduyck@xxxxxxxxxxxx>
>> ---
>> drivers/pci/iov.c | 31 +++++++++++++++++--------------
>> 1 file changed, 17 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>> index 238950412de0..cecc242c1af0 100644
>> --- a/drivers/pci/iov.c
>> +++ b/drivers/pci/iov.c
>> @@ -231,13 +231,18 @@ static void virtfn_remove(struct pci_dev *dev, int id, int reset)
>>
>> int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
>> {
>> - return 0;
>> + return 0;
>> +}
>> +
>> +int __weak pcibios_sriov_disable(struct pci_dev *pdev)
>> +{
>> + return 0;
>> }
>>
>> static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> {
>> int rc;
>> - int i, j;
>> + int i;
>> int nres;
>> u16 offset, stride, initial;
>> struct resource *res;
>> @@ -245,7 +250,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> struct pci_sriov *iov = dev->sriov;
>> int bars = 0;
>> int bus;
>> - int retval;
>>
>> if (!nr_virtfn)
>> return 0;
>> @@ -322,10 +326,11 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> if (nr_virtfn < initial)
>> initial = nr_virtfn;
>>
>> - if ((retval = pcibios_sriov_enable(dev, initial))) {
>> + rc = pcibios_sriov_enable(dev, initial);
>> + if (rc) {
>> dev_err(&dev->dev, "failure %d from pcibios_sriov_enable()\n",
>> - retval);
>> - return retval;
>> + rc);
>> + goto err_pcibios;
>> }
>>
>> for (i = 0; i < initial; i++) {
>> @@ -340,25 +345,23 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> return 0;
>>
>> failed:
>> - for (j = 0; j < i; j++)
>> - virtfn_remove(dev, j, 0);
>> + while (i--)
>> + virtfn_remove(dev, i, 0);
>>
>> + pcibios_sriov_disable(dev);
>> +err_pcibios:
>> iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
>> pci_cfg_access_lock(dev);
>> pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>> - pci_iov_set_numvfs(dev, 0);
>> ssleep(1);
>> pci_cfg_access_unlock(dev);
>>
>> if (iov->link != dev->devfn)
>> sysfs_remove_link(&dev->dev.kobj, "dep_link");
>>
>> - return rc;
>> -}
>> + pci_iov_set_numvfs(dev, 0);
>
> Do you have a spec pointer for the 1 sec delay before clearing NumVFs?
The text from the SR-IOV spec v1.1 in relation to clearing VF enable reads:
If software Clears VF Enable, software must allow 1.0 s second after
VF Enable is Cleared before
reading any field in the SR-IOV Extended Capability or the VF
Migration State Array (see
Section 3.3.15.1).
I'm assuming the same would apply to writing to the region after VFE
has been cleared.
> Does we need to clear NumVFs while holding the cfg access lock?
I don't think so.
Earlier in the function pci_iov_set_numvfs was getting set before
without taking the lock. I think the lock is being used to enforce
the required grace period on configuration space access following
setting or clearing the VFE bit. The code as it is now matches what
we have in sriov_disable so I suspect it likely works this way as that
path has likely seen much more validation than the exception handling
path for sriov_enable has.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
