Re: [RFC Patch 00/12] IXGBE: Add live migration support for SRIOV NIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/28/2015 11:12 PM, Lan Tianyu wrote:
On 2015年10月26日 23:03, Alexander Duyck wrote:
No.  I think you are missing the fact that there are 256 descriptors per
page.  As such if you dirty just 1 you will be pulling in 255 more, of
which you may or may not have pulled in the receive buffer for.

So for example if you have the descriptor ring size set to 256 then that
means you are going to get whatever the descriptor ring has since you
will be marking the entire ring dirty with every packet processed,
however you cannot guarantee that you are going to get all of the
receive buffers unless you go through and flush the entire ring prior to
migrating.

Yes, that will be a problem. How about adding tag for each Rx buffer and
check the tag when deliver the Rx buffer to stack? If tag has been
overwritten, this means the packet data has been migrated.

Then you have to come up with a pattern that you can guarantee is the tag and not part of the packet data. That isn't going to be something that is easy to do. It would also have a serious performance impact on the VF.

This is why I have said you will need to do something to force the rings
to be flushed such as initiating a PM suspend prior to migrating.  You
need to do something to stop the DMA and flush the remaining Rx buffers
if you want to have any hope of being able to migrate the Rx in a
consistent state.  Beyond that the only other thing you have to worry
about are the Rx buffers that have already been handed off to the
stack.  However those should be handled if you do a suspend and somehow
flag pages as dirty when they are unmapped from the DMA.

- Alex
This will be simple and maybe our first version to enable migration. But
we still hope to find a way not to disable DMA before stopping VCPU to
decrease service down time.

You have to stop the Rx DMA at some point anyway. It is the only means to guarantee that the device stops updating buffers and descriptors so that you will have a consistent state.

Your code was having to do a bunch of shuffling in order to get things set up so that you could bring the interface back up. I would argue that it may actually be faster at least on the bring-up to just drop the old rings and start over since it greatly reduced the complexity and the amount of device related data that has to be moved.

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux