Hi Bjorn, On 20 October 2015 13:50, Bjorn wrote: > On Tue, Oct 20, 2015 at 08:00:10AM +0000, Phil Edworthy wrote: > > Hi Geert, > > > > On 20 October 2015 08:37, Geert wrote: > > > On Tue, Oct 20, 2015 at 3:36 AM, Simon Horman <horms@xxxxxxxxxxxx> > wrote: > > > > On Mon, Oct 19, 2015 at 06:16:34PM -0500, Bjorn Helgaas wrote: > > > >> [+cc Geert] > > > >> > > > >> On Fri, Oct 02, 2015 at 11:25:03AM +0100, Phil Edworthy wrote: > > > >> > Fixes and changes to get PCIe working on ARM64 with mulitple > instances. > > > >> > > > > >> > I've tested these on ARM (Koelsch board), and it works fine. > > > >> > I've also tested on ARM64 (Salvator-X board), but I currently have an > issue > > > >> > with inbound PCI accesses. I am reasonably sure that this problem is > > > hardware > > > >> > related. > > > >> > > > > >> > Phil Edworthy (4): > > > >> > PCI: rcar-pcie: Make PCI aware of the IO resources > > > >> > PCI: rcar-pcie: Remove dependency on ARM-specific struct hw_pci > > > >> > PCI: rcar-pcie: Set root bus nr to that provided in DT > > > >> > PCI: rcar-pcie: Fix IO offset for multiple instances > > > >> > > > >> I applied these with Simon's ack to pci/host-rcar for v4.4. > > > >> > > > >> Note that these are on top of Geert's patch to make rcar build only > > > >> for ARM, which is probably not necessary after you remove the struct > > > >> hw_pci dependency. I can drop Geert's patch if you want. > > > > > > > > I'm happy with that if Geert is. > > > > > > Iff the driver compiles/works on arm64 now, my patch should/must be > > > dropped/reverted. > > Yes, the driver works on the ARM64 Salvator-X board. > > I dropped Geert's patch and redid the merges to my "next" branch, so > rcar should build for both ARM and ARM64. Thanks for sorting that out. Phil -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
