> Meelis reported that qla2000 driver does not get loaded on one sparc system. > > schizo f00732d0: PCI host bridge to bus 0001:00 > pci_bus 0001:00: root bus resource [io 0x7fe01000000-0x7fe01ffffff] (bus address [0x0000-0xffffff]) > pci 0001:00:06.0: quirk: [io 0x7fe01000800-0x7fe0100083f] claimed by ali7101 ACPI > pci 0001:00:06.0: quirk: [io 0x7fe01000600-0x7fe0100061f] claimed by ali7101 SMB > pci 0001:00:07.0: can't claim BAR 0 [io 0x7fe01000000-0x7fe0100ffff]: address conflict with 0001:00:06.0 [io 0x7fe01000600-0x7fe0100061f] > > So the quirk for M7101 claim the io range early. > > According to spec with M7101 in M1543 page 103/104, > http://www.versalogic.com/Support/Downloads/pdf/ali1543.pdf > 0xe0, and 0xe2 do not include address info for acpi/smb. > > Kill wrong quirk about them. > > Link: http://kodu.ut.ee/~mroos/dm/dm.v240 > Link: http://kodu.ut.ee/~mroos/dm/dm.sb100 > Reported-by: Meelis Roos <mroos@xxxxxxxx> > Cc: Meelis Roos <mroos@xxxxxxxx> > Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx> I tested it on Sub Blade 100 on top of 4.3-rc5 without your other patchset. The quirk messages are gone but now there are even more BAR allocation messages: http://kodu.ut.ee/~mroos/dm/dm.sb100+quirkpatch Does your for-pci-v4.4-next patchset in your git repo already contain that? On V240 it seemed to be applied in your git. -- Meelis Roos (mroos@xxxxxxxx) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
