[PATCH v5 3/5] PCI: designware: Implement multivector MSI IRQ setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Implement multivector MSI IRQ setup.  This allows to set up and use multiple
MSI IRQs per device.

[bhelgaas: changelog, use -EINVAL instead of -ENOSYS]
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Acked-by: Pratyush Anand <pratyush.anand@xxxxxxxxx>
---
 drivers/pci/host/pcie-designware.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 7a168ea25e2f..3a2b8bce27a6 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -286,6 +286,9 @@ static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
 	}
 
 	*pos = pos0;
+	desc->nvec_used = no_irqs;
+	desc->msi_attrib.multiple = order_base_2(no_irqs);
+
 	return irq;
 
 no_valid_irq:
@@ -329,6 +332,33 @@ static int dw_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
 	return 0;
 }
 
+static int dw_msi_setup_irqs(struct msi_controller *chip, struct pci_dev *pdev,
+			     int nvec, int type)
+{
+#ifdef CONFIG_PCI_MSI
+	int irq, pos;
+	struct msi_desc *desc;
+	struct pcie_port *pp = sys_to_pcie(pdev->bus->sysdata);
+
+	/* MSI-X interrupts are not supported */
+	if (type == PCI_CAP_ID_MSIX)
+		return -EINVAL;
+
+	WARN_ON(!list_is_singular(&pdev->dev.msi_list));
+	desc = list_entry(pdev->dev.msi_list.next, struct msi_desc, list);
+
+	irq = assign_irq(nvec, desc, &pos);
+	if (irq < 0)
+		return irq;
+
+	dw_msi_setup_msg(pp, irq, pos);
+
+	return 0;
+#else
+	return -EINVAL;
+#endif
+}
+
 static void dw_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
 {
 	struct irq_data *data = irq_get_irq_data(irq);
@@ -340,6 +370,7 @@ static void dw_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
 
 static struct msi_controller dw_pcie_msi_chip = {
 	.setup_irq = dw_msi_setup_irq,
+	.setup_irqs = dw_msi_setup_irqs,
 	.teardown_irq = dw_msi_teardown_irq,
 };
 
-- 
2.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux