On Tue, Jul 28, 2015 at 09:42:27AM +0800, Zhang Rui wrote:
> From 57edba9c677e47354846db951014dc4d5b13ce54 Mon Sep 17 00:00:00 2001
> From: Zhang Rui <rui.zhang@xxxxxxxxx>
> Date: Sun, 26 Jul 2015 14:15:36 +0800
> Subject: [PATCH] PCI: Disable async suspend/resume for Jmicron chip
...
In the interest of making progress on this, I reworked this to be what I'm
looking for. It's not significantly different code-wise from what you
posted originally, so I left your Signed-off-by. But let me know if I
messed it up.
We don't actually *know* whether the quirk needs to be applied before
pata_jmicron is loaded, but my guess is that is does, so I left it as a PCI
quirk rather than as a driver quirk.
Comments welcome!
Bjorn
commit 09981db5b0c9a6865aa39126b71bc87718577e4b
Author: Zhang Rui <rui.zhang@xxxxxxxxx>
Date: Mon Aug 24 15:27:11 2015 -0500
PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at
function 1 doesn't work if it is powered on before the SATA controller at
function 0. The result is that PATA doesn't work after resume, and
messages like this:
pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3
irq 17: nobody cared (try booting with the "irqpoll" option)
e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361")
solved this problem for JMicron 361 and 363 devices. With async suspend
disabled, we always power on function 0 before function 1.
Barto then reported the same problem with a JMicron 368 (see comment #57 in
the bugzilla).
Rather than extending the blacklist piecemeal, disable async suspend for
all JMicron multi-function SATA/PATA/AHCI devices.
This quirk could stay in the ahci and pata_jmicron drivers, but it's likely
the problem will occur even if pata_jmicron isn't loaded until after the
suspend/resume. Making it a PCI quirk ensures that we'll preserve the
power-on order even if the drivers aren't loaded.
[bhelgaas: changelog, limit to multi-function, limit to IDE/ATA]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551
Reported-by: Barto <mister.freeman@xxxxxxxxxxx>
Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7e62751..a466602 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -351,6 +351,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* JMicron 362B and 362C have an AHCI function with IDE class code */
{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
+ /* May need to update quirk_jmicron_async_suspend() for additions */
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -1451,18 +1452,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
else if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
- /*
- * The JMicron chip 361/363 contains one SATA controller and one
- * PATA controller,for powering on these both controllers, we must
- * follow the sequence one by one, otherwise one of them can not be
- * powered on successfully, so here we disable the async suspend
- * method for these chips.
- */
- if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
- (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
- pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
- device_disable_async_suspend(&pdev->dev);
-
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 47e418b..4d1a5d2 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
};
const struct ata_port_info *ppi[] = { &info, NULL };
- /*
- * The JMicron chip 361/363 contains one SATA controller and one
- * PATA controller,for powering on these both controllers, we must
- * follow the sequence one by one, otherwise one of them can not be
- * powered on successfully, so here we disable the async suspend
- * method for these chips.
- */
- if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
- (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
- pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
- device_disable_async_suspend(&pdev->dev);
-
return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index b6af4b0..5e35a9d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1570,6 +1570,18 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3
#endif
+static void quirk_jmicron_async_suspend(struct pci_dev *dev)
+{
+ if (dev->multifunction) {
+ device_disable_async_suspend(&dev->dev);
+ dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n");
+ }
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend);
+
#ifdef CONFIG_X86_IO_APIC
static void quirk_alder_ioapic(struct pci_dev *pdev)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
