[PATCH] iov: initialize NumVFs register to 0 at the end of sriov_init()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After commit 4449f079722c ("PCI: Calculate maximum number of buses
required for VFs"),the initial value of NumVFs register was set to
non-zero after sriov_init() and no VFs was enabled in device driver.
this changed the behaviour of kernel exported by lspci and sysfs etc.
so this patch initialize the NumVFs register to zero after the
calculation of max_VF_buses was done.

Tested on stable 4.1 and passed building on stable 4.2-rc7

Signed-off-by: Ethan Zhao <ethan.zhao@xxxxxxxxxx>
Tested-by: Sriharsha Yadagudde <sriharsha.devdas@xxxxxxxxxx>
---
 drivers/pci/iov.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index ee0ebff..6969084 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -476,6 +476,7 @@ found:
 	dev->is_physfn = 1;
 	iov->max_VF_buses = virtfn_max_buses(dev);
 
+	pci_iov_set_numvfs(dev, 0);
 	return 0;
 
 failed:
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux