On Mon, Aug 17, 2015 at 4:09 AM, Ley Foon Tan <lftan@xxxxxxxxxx> wrote:
> This patch adds the Altera PCIe host controller driver.
>
> Signed-off-by: Ley Foon Tan <lftan@xxxxxxxxxx>
> ---
> drivers/pci/host/Kconfig | 7 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-altera.c | 543 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 551 insertions(+)
> create mode 100644 drivers/pci/host/pcie-altera.c
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 675c2d1..4b4754a 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -145,4 +145,11 @@ config PCIE_IPROC_BCMA
> Say Y here if you want to use the Broadcom iProc PCIe controller
> through the BCMA bus interface
>
<snip>
> +
> +/* Address translation table entry size */
> +#define ATT_ENTRY_SIZE 8
> +
> +#define DWORD_MASK 3
> +
> +struct altera_pcie {
> + struct platform_device *pdev;
> + struct resource *txs;
You have "Txs" documented in the bindings document, you have a pointer
here, but you've never used it
anywhre in the code? What is it for?
> + void __iomem *cra_base;
> + int irq;
> + u8 root_bus_nr;
> + struct irq_domain *irq_domain;
> + struct resource bus_range;
> + struct list_head resources;
> +};
> +
<snip>
> +
> +static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
> + int where, u32 *value)
> +{
> + int ret;
> + u32 headers[TLP_HDR_SIZE];
> +
> + if (bus == pcie->root_bus_nr)
> + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGRD0);
> + else
> + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGRD1);
> +
> + headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, devfn),
> + TLP_READ_TAG);
> + headers[2] = TLP_CFG_DW2(bus, devfn, where);
> +
> + tlp_write_packet(pcie, headers, 0);
> +
> + ret = tlp_read_packet(pcie, value);
> + if (ret)
> + *value = ~0UL; /* return 0xFFFFFFFF if error */
> +
> + return ret;
> +}
> +
> +static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
> + int where, u32 value)
> +{
> + u32 headers[TLP_HDR_SIZE];
> +
> + if (bus == pcie->root_bus_nr)
> + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGWR0);
> + else
> + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGWR1);
> +
> + headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, devfn),
> + TLP_WRITE_TAG);
> + headers[2] = TLP_CFG_DW2(bus, devfn, where);
> +
> + tlp_write_packet(pcie, headers, value);
> +
> + tlp_read_packet(pcie, NULL);
You need to check for the error here.
> +
> + /* Keep an eye out for changes to the root bus number */
> + if ((bus == pcie->root_bus_nr) && (where == PCI_PRIMARY_BUS))
> + pcie->root_bus_nr = (u8)(value);
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
<snip>
> +
> +static int altera_pcie_parse_dt(struct altera_pcie *pcie)
> +{
> + struct resource *cra;
> + struct platform_device *pdev = pcie->pdev;
> +
> + cra = platform_get_resource_byname(pdev, IORESOURCE_MEM, "Cra");
> + if (!cra) {
> + cra = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cra");
> + if (!cra) {
> + dev_err(&pdev->dev,
> + "no cra memory resource defined\n");
> + return -ENODEV;
> + }
> + }
> +
What about "Txs"?
Dinh
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
