Set up the high part of the MSI target address in order to allow the MSI target to reside above the 4GB mark on 64bit and PAE systems. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> --- v4: fix target address setup in dw_pcie_msi_init() --- drivers/pci/host/pcie-designware.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 74034395cf2a..71629175d1a1 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -205,12 +205,16 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp) void dw_pcie_msi_init(struct pcie_port *pp) { + u64 msi_target; + pp->msi_data = __get_free_pages(GFP_KERNEL, 0); + msi_target = virt_to_phys((void *)pp->msi_data); /* program the msi_data */ dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4, - virt_to_phys((void *)pp->msi_data)); - dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, 0); + (u32)(msi_target & 0xffffffff)); + dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_HI, 4, + (u32)(msi_target >> 32 & 0xffffffff)); } static void dw_pcie_msi_clear_irq(struct pcie_port *pp, int irq) @@ -299,12 +303,15 @@ no_valid_irq: static void dw_msi_setup_msg(struct pcie_port *pp, unsigned int irq, u32 pos) { struct msi_msg msg; + u64 msi_target; if (pp->ops->get_msi_addr) - msg.address_lo = pp->ops->get_msi_addr(pp); + msi_target = pp->ops->get_msi_addr(pp); else - msg.address_lo = virt_to_phys((void *)pp->msi_data); - msg.address_hi = 0x0; + msi_target = virt_to_phys((void *)pp->msi_data); + + msg.address_lo = (u32)(msi_target & 0xffffffff); + msg.address_hi = (u32)(msi_target >> 32 & 0xffffffff); if (pp->ops->get_msi_data) msg.data = pp->ops->get_msi_data(pp, pos); -- 2.4.6 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html