On Tue, Aug 11, 2015 at 12:32:13PM +1000, Alexey Kardashevskiy wrote:
>On 08/11/2015 10:12 AM, Gavin Shan wrote:
>>On Mon, Aug 10, 2015 at 05:40:08PM +1000, Alexey Kardashevskiy wrote:
>>>On 08/06/2015 02:11 PM, Gavin Shan wrote:
>>>>There're 3 windows (IO, M32 and M64) for PHB, root port and upstream
>>>
>>>These are actually IO, non-prefetchable and prefetchable windows which happen
>>>to be IO, 32bit and 64bit windows but this has nothing to do with the M32/M64
>>>BAR registers in P7IOC/PHB3, do I understand this correctly?
>>>
>>
>>In pci-ioda.c, we have below definiations that are defined when
>>developing the code, not from any specification:
>>
>>IO - resources with IO property
>>M32 - 32-bits or non-prefetchable resources
>>M64 - 64-bits and prefetchable resources
>
>
>This what I am saying - it is incorrect and confusing. M32/M64 are PHB3
>register names and associated windows (with "M" in the beginning) but not
>device resources.
>
I don't see how it's incorrect and confusing. M32/M64 are not PHB3
register names. Also, device resource is either IO, 32-bits prefetchable,
memory, 32-bits non-prefetchable memory, 64-bits non-prefetchable memory,
64-bits prefetchable memory. They match with IO, M32, M64.
>>>>port of the PCIE switch behind root port. In order to support PCI
>>>>hotplug, we extend the start/end address of those 3 windows of root
>>>>port or upstream port to the start/end address of the 3 PHB's windows.
>>>>The current implementation, assigning IO or M32 segment based on the
>>>>bridge's windows, isn't reliable.
>>>>
>>>>The patch fixes above issue by calculating PE's consumed IO or M32
>>>>segments from its contained devices, no PCI bridge windows involved
>>>>if the PE doesn't contain all the subordinate PCI buses.
>>>
>>>Please, rephrase it. How can PCI bridges be involved in PE consumption?
>>>
>>
>>Ok. Will add something like below:
>>
>>if the PE, corresponding to the PCI bus, doesn't contain all the subordinate
>>PCI buses.
>
>
>No, my question was about "PCI bridge windows involved" - what do you do to
>the windows if PE does not own all child buses?
>
All of it is about the original implementation: When the PE doesn't include
all child buses, the resource consumed by the PE is: resources assigned to
current PCI bus and then exclude the resources assigned to the child buses.
Note that PCI bridge windows are actually PCI bus's resource.
>>>
>>>>Otherwise,
>>>>the PCI bridge windows still contribute to PE's consumed IO or M32
>>>>segments.
>>>
>>>PCI bridge windows themselves consume PEs? Is that correct?
>>>
>>
>>PCI bridge windows consume IO, M32, M64 segments, not PEs.
>
>Ah, right.
>
>
>>>>
>>>>Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
>>>>---
>>>> arch/powerpc/platforms/powernv/pci-ioda.c | 136 +++++++++++++++++-------------
>>>> 1 file changed, 79 insertions(+), 57 deletions(-)
>>>>
>>>>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>>>>index 488a53e..713f4b4 100644
>>>>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>>>>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>>>>@@ -2844,75 +2844,97 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
>>>> }
>>>> #endif /* CONFIG_PCI_IOV */
>>>>
>>>>-/*
>>>>- * This function is supposed to be called on basis of PE from top
>>>>- * to bottom style. So the the I/O or MMIO segment assigned to
>>>>- * parent PE could be overrided by its child PEs if necessary.
>>>>- */
>>>>-static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
>>>>- struct pnv_ioda_pe *pe)
>>>>+static int pnv_ioda_setup_one_res(struct pci_controller *hose,
>>>>+ struct pnv_ioda_pe *pe,
>>>>+ struct resource *res)
>>>> {
>>>> struct pnv_phb *phb = hose->private_data;
>>>> struct pci_bus_region region;
>>>>- struct resource *res;
>>>>- int i, index;
>>>>- unsigned int segsize;
>>>>+ unsigned int index, segsize;
>>>> unsigned long *segmap, *pe_segmap;
>>>> uint16_t win;
>>>> int64_t rc;
>>>>
>>>>- /*
>>>>- * NOTE: We only care PCI bus based PE for now. For PCI
>>>>- * device based PE, for example SRIOV sensitive VF should
>>>>- * be figured out later.
>>>>- */
>>>>- BUG_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)));
>>>>+ /* Check if we need map the resource */
>>>>+ if (!res->parent || !res->flags || res->start > res->end)
>>>
>>>res->start >= res->end ?
>>>
>>
>>No, res->start == res->end is valid.
>>
>>>
>>>>+ return 0;
>>>>
>>>>- pci_bus_for_each_resource(pe->pbus, res, i) {
>>>>- if (!res || !res->flags ||
>>>>- res->start > res->end)
>>>>- continue;
>>>>+ if (res->flags & IORESOURCE_IO) {
>>>>+ region.start = res->start - phb->ioda.io_pci_base;
>>>>+ region.end = res->end - phb->ioda.io_pci_base;
>>>>+ segsize = phb->ioda.io_segsize;
>>>>+ segmap = phb->ioda.io_segmap;
>>>>+ pe_segmap = pe->io_segmap;
>>>>+ win = OPAL_IO_WINDOW_TYPE;
>>>>+ } else if ((res->flags & IORESOURCE_MEM) &&
>>>>+ !pnv_pci_is_mem_pref_64(res->flags)) {
>>>>+ region.start = res->start -
>>>>+ hose->mem_offset[0] -
>>>>+ phb->ioda.m32_pci_base;
>>>>+ region.end = res->end -
>>>>+ hose->mem_offset[0] -
>>>>+ phb->ioda.m32_pci_base;
>>>>+ segsize = phb->ioda.m32_segsize;
>>>>+ segmap = phb->ioda.m32_segmap;
>>>>+ pe_segmap = pe->m32_segmap;
>>>>+ win = OPAL_M32_WINDOW_TYPE;
>>>>+ } else {
>>>>+ return 0;
>>>>+ }
>>>>
>>>>- if (res->flags & IORESOURCE_IO) {
>>>>- region.start = res->start - phb->ioda.io_pci_base;
>>>>- region.end = res->end - phb->ioda.io_pci_base;
>>>>- segsize = phb->ioda.io_segsize;
>>>>- segmap = phb->ioda.io_segmap;
>>>>- pe_segmap = pe->io_segmap;
>>>>- win = OPAL_IO_WINDOW_TYPE;
>>>>- } else if ((res->flags & IORESOURCE_MEM) &&
>>>>- !pnv_pci_is_mem_pref_64(res->flags)) {
>>>>- region.start = res->start -
>>>>- hose->mem_offset[0] -
>>>>- phb->ioda.m32_pci_base;
>>>>- region.end = res->end -
>>>>- hose->mem_offset[0] -
>>>>- phb->ioda.m32_pci_base;
>>>>- segsize = phb->ioda.m32_segsize;
>>>>- segmap = phb->ioda.m32_segmap;
>>>>- pe_segmap = pe->m32_segmap;
>>>>- win = OPAL_M32_WINDOW_TYPE;
>>>>- } else {
>>>>- continue;
>>>>+ region.start = _ALIGN_DOWN(region.start, segsize);
>>>>+ region.end = _ALIGN_UP(region.end, segsize);
>>>>+ index = region.start / segsize;
>>>>+ while (index < phb->ioda.total_pe &&
>>>>+ region.start < region.end) {
>>>>+ rc = opal_pci_map_pe_mmio_window(phb->opal_id,
>>>>+ pe->pe_number, win, 0, index);
>>>>+ if (rc != OPAL_SUCCESS) {
>>>>+ pr_warn("%s: Error %lld mapping (%d) seg#%d to PHB#%d-PE#%d\n",
>>>>+ __func__, rc, win, index,
>>>>+ pe->phb->hose->global_number,
>>>>+ pe->pe_number);
>>>>+ return -EIO;
>>>> }
>>>>
>>>>- index = region.start / phb->ioda.io_segsize;
>>>>- while (index < phb->ioda.total_pe &&
>>>>- region.start <= region.end) {
>>>>- set_bit(index, segmap);
>>>>- set_bit(index, pe_segmap);
>>>>- rc = opal_pci_map_pe_mmio_window(phb->opal_id,
>>>>- pe->pe_number, win, 0, index);
>>>>- if (rc != OPAL_SUCCESS) {
>>>>- pr_warn("%s: Error %lld mapping (%d) seg#%d to PHB#%d-PE#%d\n",
>>>>- __func__, rc, win, index,
>>>>- pe->phb->hose->global_number,
>>>>- pe->pe_number);
>>>>- break;
>>>>- }
>>>>+ set_bit(index, segmap);
>>>>+ set_bit(index, pe_segmap);
>>>>+ region.start += segsize;
>>>>+ index++;
>>>>+ }
>>>>+
>>>>+ return 0;
>>>>+}
>>>>+
>>>>+static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
>>>>+ struct pnv_ioda_pe *pe)
>>>>+{
>>>>+ struct pci_dev *pdev;
>>>>+ struct resource *res;
>>>>+ int i;
>>>>+
>>>>+ /* This function only works for bus dependent PE */
>>>>+ BUG_ON(!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)));
>>>>+
>>>>+ list_for_each_entry(pdev, &pe->pbus->devices, bus_list) {
>>>>+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
>>>>+ res = &pdev->resource[i];
>>>>+ if (pnv_ioda_setup_one_res(hose, pe, res))
>>>>+ return;
>>>>+ }
>>>>+
>>>>+ /* If the PE contains all subordinate PCI buses, the
>>>>+ * resources of the child bridges should be mapped
>>>>+ * to the PE as well.
>>>>+ */
>>>>+ if (!(pe->flags & PNV_IODA_PE_BUS_ALL) ||
>>>>+ (pdev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
>>>>+ continue;
>>>>
>>>>- region.start += segsize;
>>>>- index++;
>>>>+ for (i = 0; i <= PCI_BRIDGE_RESOURCE_NUM; i++) {
>>>>+ res = &pdev->resource[PCI_BRIDGE_RESOURCES + i];
>>>>+ if (pnv_ioda_setup_one_res(hose, pe, res))
>>>>+ return;
>>>> }
>>>> }
>>>> }
>>>>
>>
Thanks,
Gavin
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
