On 08/06/2015 02:11 PM, Gavin Shan wrote:
This adds the refcount to PE, which represents number of PCI
devices contained in the PE. When last device leaves from the
PE, the PE together with its consumed resources (IO, DMA, PELTM,
PELTV) are released, to support PCI hotplug.
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 233 +++++++++++++++++++++++++++---
arch/powerpc/platforms/powernv/pci.h | 3 +
2 files changed, 217 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index d2697a3..13d8a5b 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -132,6 +132,53 @@ static inline bool pnv_pci_is_mem_pref_64(unsigned long flags)
(IORESOURCE_MEM_64 | IORESOURCE_PREFETCH));
}
+static void pnv_pci_ioda_release_pe_dma(struct pnv_ioda_pe *pe)
Is this ioda1 helper or common helper for both ioda1 and ioda2?
+{
+ struct pnv_phb *phb = pe->phb;
+ struct iommu_table *tbl;
+ int seg;
+ int64_t rc;
+
+ /* No DMA32 segments allocated */
+ if (pe->dma32_seg == PNV_INVALID_SEGMENT ||
+ pe->dma32_segcount <= 0) {
dma32_segcount is unsigned long, cannot be less than 0.
+ pe->dma32_seg = PNV_INVALID_SEGMENT;
+ pe->dma32_segcount = 0;
+ return;
+ }
+
+ /* Unlink IOMMU table from group */
+ tbl = pe->table_group.tables[0];
+ pnv_pci_unlink_table_and_group(tbl, &pe->table_group);
+ if (pe->table_group.group) {
+ iommu_group_put(pe->table_group.group);
+ BUG_ON(pe->table_group.group);
+ }
+
+ /* Release IOMMU table */
+ free_pages(tbl->it_base,
+ get_order(TCE32_TABLE_SIZE * pe->dma32_segcount));
+ iommu_free_table(tbl,
+ of_node_full_name(pci_bus_to_OF_node(pe->pbus)));
There is pnv_pci_ioda2_table_free_pages(), use it.
+
+ /* Disable TVE */
+ for (seg = pe->dma32_seg;
+ seg < pe->dma32_seg + pe->dma32_segcount;
+ seg++) {
+ rc = opal_pci_map_pe_dma_window(phb->opal_id,
+ pe->pe_number, seg, 0, 0ul, 0ul, 0ul);
+ if (rc)
+ pe_warn(pe, "Error %ld unmapping DMA32 seg#%d\n",
+ rc, seg);
+ }
May be implement iommu_table_group_ops::unset_window for IODA1 too?
+
+ /* Free the DMA32 segments */
+ bitmap_clear(phb->ioda.dma32_segmap,
+ pe->dma32_seg, pe->dma32_segcount);
+ pe->dma32_seg = PNV_INVALID_SEGMENT;
+ pe->dma32_segcount = 0;
+}
+
static inline void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_ioda_pe *pe)
{
/* 01xb - invalidate TCEs that match the specified PE# */
@@ -199,13 +246,15 @@ static void pnv_pci_ioda2_set_bypass(struct pnv_ioda_pe *pe, bool enable)
pe->tce_bypass_enabled = enable;
}
-#ifdef CONFIG_PCI_IOV
-static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev,
- struct pnv_ioda_pe *pe)
+static void pnv_pci_ioda2_release_pe_dma(struct pnv_ioda_pe *pe)
{
struct iommu_table *tbl;
+ struct device_node *dn;
int64_t rc;
+ if (pe->dma32_seg == PNV_INVALID_SEGMENT)
+ return;
+
tbl = pe->table_group.tables[0];
rc = pnv_pci_ioda2_unset_window(&pe->table_group, 0);
if (rc)
@@ -216,10 +265,91 @@ static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev,
iommu_group_put(pe->table_group.group);
BUG_ON(pe->table_group.group);
}
+
+ if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
+ dn = pci_bus_to_OF_node(pe->pbus);
+ else if (pe->flags & PNV_IODA_PE_DEV)
+ dn = pci_device_to_OF_node(pe->pdev);
+#ifdef CONFIG_PCI_IOV
+ else if (pe->flags & PNV_IODA_PE_VF)
+ dn = pci_device_to_OF_node(pe->parent_dev);
+#endif
+ else
+ dn = NULL;
+
pnv_pci_ioda2_table_free_pages(tbl);
- iommu_free_table(tbl, of_node_full_name(dev->dev.of_node));
+ iommu_free_table(tbl, of_node_full_name(dn));
+ pe->dma32_seg = PNV_INVALID_SEGMENT;
+}
I'd drop the chunk about calculating @dn above, nobody really cares what
iommu_free_table() prints. If you really need to print something, print PE#.
+
+static void pnv_ioda_release_pe_dma(struct pnv_ioda_pe *pe)
+{
+ struct pnv_phb *phb = pe->phb;
+
+ switch (phb->type) {
+ case PNV_PHB_IODA1:
+ pnv_pci_ioda_release_pe_dma(pe);
+ break;
+ case PNV_PHB_IODA2:
+ pnv_pci_ioda2_release_pe_dma(pe);
+ break;
+ default:
+ pr_warn("%s: Cannot release DMA for PHB type %d\n",
+ __func__, phb->type);
This is BUG_ON() indeed because we cannot possibly get that far with
unsupported PHB type, it would have crashed earlier.
+ }
+}
+
+static void pnv_ioda_release_pe_one_seg(struct pnv_ioda_pe *pe, int win)
+{
+ struct pnv_phb *phb = pe->phb;
+ unsigned long *segmap = NULL;
+ unsigned long *pe_segmap = NULL;
+ int segno, limit, mod = 0;
+
+ switch (win) {
+ case OPAL_IO_WINDOW_TYPE:
+ segmap = phb->ioda.io_segmap;
+ pe_segmap = pe->io_segmap;
+ break;
+ case OPAL_M32_WINDOW_TYPE:
+ segmap = phb->ioda.m32_segmap;
+ pe_segmap = pe->m32_segmap;
+ break;
+ case OPAL_M64_WINDOW_TYPE:
+ if (phb->type != PNV_PHB_IODA1)
+ return;
+ segmap = phb->ioda.m64_segmap;
+ pe_segmap = pe->m64_segmap;
You seem to keep phb->ioda.m64_segmap update but you never actually read
it, you only read pe->m64_segmap. Is that correct or I am missing something
here?
+ mod = 8;
+ break;
+ default:
+ return;
+ }
+
+ segno = -1;
+ limit = phb->ioda.total_pe_num;
+ while ((segno = find_next_bit(pe_segmap, limit, segno + 1)) < limit) {
+ if (mod > 0)
+ opal_pci_map_pe_mmio_window(phb->opal_id,
+ phb->ioda.reserved_pe_idx, win,
+ segno / mod, segno % mod);
+ else
+ opal_pci_map_pe_mmio_window(phb->opal_id,
+ phb->ioda.reserved_pe_idx, win,
+ 0, segno);
+
+ clear_bit(segno, pe_segmap);
+ clear_bit(segno, segmap);
+ }
+}
+
+static void pnv_ioda_release_pe_seg(struct pnv_ioda_pe *pe)
+{
+ int win;
+
+ for (win = OPAL_M32_WINDOW_TYPE; win <= OPAL_IO_WINDOW_TYPE; win++)
+ pnv_ioda_release_pe_one_seg(pe, win);
}
-#endif /* CONFIG_PCI_IOV */
static int pnv_ioda_set_one_peltv(struct pnv_phb *phb,
struct pnv_ioda_pe *parent,
@@ -325,7 +455,6 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
return 0;
}
-#ifdef CONFIG_PCI_IOV
static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
{
struct pci_dev *parent;
@@ -373,9 +502,11 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
}
rid_end = pe->rid + (count << 8);
} else {
+#ifdef CONFIG_PCI_IOV
if (pe->flags & PNV_IODA_PE_VF)
parent = pe->parent_dev;
else
+#endif
parent = pe->pdev->bus->self;
bcomp = OpalPciBusAll;
dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
@@ -415,11 +546,72 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
pe->pbus = NULL;
pe->pdev = NULL;
+#ifdef CONFIG_PCI_IOV
pe->parent_dev = NULL;
+#endif
return 0;
}
-#endif /* CONFIG_PCI_IOV */
+
+static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
+{
+ struct pnv_phb *phb = pe->phb;
+ struct pnv_ioda_pe *tmp, *slave;
+
+ /* Release slave PEs in compound PE */
+ if (pe->flags & PNV_IODA_PE_MASTER) {
+ list_for_each_entry_safe(slave, tmp, &pe->slaves, list)
+ pnv_ioda_release_pe(pe);
+ }
+
+ /* Remove the PE from the list */
+ list_del(&pe->list);
+
+ /* Release resources */
+ pnv_ioda_release_pe_dma(pe);
+ pnv_ioda_release_pe_seg(pe);
+ pnv_ioda_deconfigure_pe(pe->phb, pe);
+
+ /* Release PE number */
+ clear_bit(pe->pe_number, phb->ioda.pe_alloc);
+}
+
+static inline struct pnv_ioda_pe *pnv_ioda_pe_get(struct pnv_ioda_pe *pe)
+{
+ if (!pe)
+ return NULL;
+
+ pe->device_count++;
+ return pe;
+}
+
+static inline void pnv_ioda_pe_put(struct pnv_ioda_pe *pe)
+{
+ if (!pe)
+ return;
+
+ pe->device_count--;
+ BUG_ON(pe->device_count < 0);
+ if (pe->device_count == 0)
+ pnv_ioda_release_pe(pe);
+}
Sure you do not want atomic_t for device_count? Races are impossibe here?
+
+static void pnv_pci_release_device(struct pci_dev *pdev)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn = pci_get_pdn(pdev);
+ struct pnv_ioda_pe *pe;
+
+ if (pdev->is_virtfn)
+ return;
+
+ if (!pdn || pdn->pe_number == IODA_INVALID_PE)
+ return;
+
+ pe = &phb->ioda.pe_array[pdn->pe_number];
+ pnv_ioda_pe_put(pe);
+}
static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
{
@@ -466,6 +658,7 @@ static struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb)
return pnv_ioda_init_pe(phb, pe);
}
+#ifdef CONFIG_PCI_IOV
static void pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
The name of pnv_ioda_free_pe() suggests it should work for non-SRIOV case
too but you put it under #ifdef IOV, is that correct? Is so, rename it please.
{
WARN_ON(phb->ioda.pe_array[pe].pdev);
@@ -473,6 +666,7 @@ static void pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe));
clear_bit(pe, phb->ioda.pe_alloc);
}
+#endif
static int pnv_ioda1_init_m64(struct pnv_phb *phb)
{
@@ -1177,6 +1371,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
if (pdn->pe_number != IODA_INVALID_PE)
continue;
+ pnv_ioda_pe_get(pe);
pdn->pe_number = pe->pe_number;
pe->dma32_weight += pnv_ioda_dma_weight(dev);
if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
@@ -1231,7 +1426,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS);
pe->pbus = bus;
pe->pdev = NULL;
- pe->dma32_seg = -1;
+ pe->dma32_seg = PNV_INVALID_SEGMENT;
pe->mve_number = -1;
pe->rid = bus->busn_res.start << 8;
pe->dma32_weight = 0;
@@ -1244,9 +1439,8 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
bus->busn_res.start, pe->pe_number);
if (pnv_ioda_configure_pe(phb, pe)) {
- /* XXX What do we do here ? */
- pnv_ioda_free_pe(phb, pe->pe_number);
pe->pbus = NULL;
+ pnv_ioda_release_pe(pe);
return NULL;
}
@@ -1449,14 +1643,14 @@ static void pnv_ioda_release_vf_PE(struct pci_dev *pdev, u16 num_vfs)
if ((pe->flags & PNV_IODA_PE_MASTER) &&
(pe->flags & PNV_IODA_PE_VF)) {
list_for_each_entry_safe(s, sn, &pe->slaves, list) {
- pnv_pci_ioda2_release_dma_pe(pdev, s);
+ pnv_pci_ioda2_release_dma_pe(s);
list_del(&s->list);
pnv_ioda_deconfigure_pe(phb, s);
pnv_ioda_free_pe(phb, s->pe_number);
}
}
- pnv_pci_ioda2_release_dma_pe(pdev, pe);
+ pnv_pci_ioda2_release_pe_dma(pe);
/* Remove from list */
mutex_lock(&phb->ioda.pe_list_mutex);
@@ -1532,7 +1726,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
pe->flags = PNV_IODA_PE_VF;
pe->pbus = NULL;
pe->parent_dev = pdev;
- pe->dma32_seg = -1;
+ pe->dma32_seg = PNV_INVALID_SEGMENT;
This and similar changes are not really about "Release PEs dynamically".
pe->mve_number = -1;
pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
pci_iov_virtfn_devfn(pdev, vf_index);
@@ -1995,7 +2189,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
/* XXX FIXME: Allocate multi-level tables on PHB3 */
/* We shouldn't already have a 32-bit DMA associated */
- if (WARN_ON(pe->dma32_seg >= 0))
+ if (WARN_ON(pe->dma32_seg != PNV_INVALID_SEGMENT))
return;
tbl = pnv_pci_table_alloc(phb->hose->node);
@@ -2066,10 +2260,10 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
return;
fail:
/* XXX Failure: Try to fallback to 64-bit only ? */
- if (pe->dma32_seg >= 0) {
+ if (pe->dma32_seg != PNV_INVALID_SEGMENT) {
bitmap_clear(phb->ioda.dma32_segmap,
pe->dma32_seg, pe->dma32_segcount);
- pe->dma32_seg = -1;
+ pe->dma32_seg = PNV_INVALID_SEGMENT;
pe->dma32_segcount = 0;
}
@@ -2416,7 +2610,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
int64_t rc;
/* We shouldn't already have a 32-bit DMA associated */
- if (WARN_ON(pe->dma32_seg >= 0))
+ if (WARN_ON(pe->dma32_seg != PNV_INVALID_SEGMENT))
return;
/* TVE #1 is selected by PCI address bit 59 */
@@ -2443,8 +2637,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
rc = pnv_pci_ioda2_setup_default_config(pe);
if (rc) {
- if (pe->dma32_seg >= 0)
- pe->dma32_seg = -1;
+ if (pe->dma32_seg != PNV_INVALID_SEGMENT)
+ pe->dma32_seg = PNV_INVALID_SEGMENT;
return;
}
@@ -3183,6 +3377,7 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
.teardown_msi_irqs = pnv_teardown_msi_irqs,
#endif
.enable_device_hook = pnv_pci_enable_device_hook,
+ .release_device = pnv_pci_release_device,
.window_alignment = pnv_pci_window_alignment,
.setup_bridge = pnv_pci_setup_bridge,
.reset_secondary_bus = pnv_pci_reset_secondary_bus,
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index f8e6022..2058f06 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -25,11 +25,14 @@ enum pnv_phb_model {
#define PNV_IODA_PE_SLAVE (1 << 4) /* Slave PE in compound case */
#define PNV_IODA_PE_VF (1 << 5) /* PE for one VF */
+#define PNV_INVALID_SEGMENT (-1)
+
/* Data associated with a PE, including IOMMU tracking etc.. */
struct pnv_phb;
struct pnv_ioda_pe {
unsigned long flags;
struct pnv_phb *phb;
+ int device_count;
/* A PE can be associated with a single device or an
* entire bus (& children). In the former case, pdev
--
Alexey
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
