The pci_dn instances are allocated from memblock or bootmem when
creating PCI controller (hoses) in setup_arch(). The PCI hotplug,
which will be supported by proceeding patches, will release PCI
device nodes and their corresponding pci_dn on unplugging event.
The pci_dn instance memory chunks alloed from memblock or bootmem
are hard to reused after being released.
This delays creating pci_dn using core_initcall() so that they can
be allocated from slab. In turn, the memory chunks for them can be
reused after being released without problem. Since the pci_dn and
eeh_dev has same life cycle, the eeh_dev is created when pci_dn is
populated. We needn't create eeh_dev with another initcall. The
time to create PHB PEs is delayed a bit from core_initcall() to
core_initcall_sync().
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
arch/powerpc/include/asm/eeh.h | 2 +-
arch/powerpc/include/asm/ppc-pci.h | 1 -
arch/powerpc/kernel/eeh_dev.c | 19 ++++------------
arch/powerpc/kernel/pci_dn.c | 20 +++++++++++++++--
arch/powerpc/platforms/maple/pci.c | 34 ++++++++++++++++++-----------
arch/powerpc/platforms/pasemi/pci.c | 3 ---
arch/powerpc/platforms/powermac/pci.c | 40 ++++++++++++++++++++--------------
arch/powerpc/platforms/powernv/pci.c | 3 ---
arch/powerpc/platforms/pseries/setup.c | 7 +-----
9 files changed, 69 insertions(+), 60 deletions(-)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index ea1f13c4..19b6050 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -272,7 +272,7 @@ void eeh_pe_restore_bars(struct eeh_pe *pe);
const char *eeh_pe_loc_get(struct eeh_pe *pe);
struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
-void *eeh_dev_init(struct pci_dn *pdn, void *data);
+struct eeh_dev *eeh_dev_init(struct pci_dn *pdn, struct pci_controller *phb);
void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
int eeh_init(void);
int __init eeh_ops_register(struct eeh_ops *ops);
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index ca0c5bf..916775d 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -40,7 +40,6 @@ void *traverse_pci_dn(struct pci_dn *root,
void *(*fn)(struct pci_dn *, void *),
void *data);
-extern void pci_devs_phb_init(void);
extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
/* From rtas_pci.h */
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index aabba94..7a135c1 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -44,14 +44,13 @@
/**
* eeh_dev_init - Create EEH device according to OF node
* @pdn: PCI device node
- * @data: PHB
+ * @phb: PCI controller
*
* It will create EEH device according to the given OF node. The function
* might be called by PCI emunation, DR, PHB hotplug.
*/
-void *eeh_dev_init(struct pci_dn *pdn, void *data)
+struct eeh_dev *eeh_dev_init(struct pci_dn *pdn, struct pci_controller *phb)
{
- struct pci_controller *phb = data;
struct eeh_dev *edev;
/* Allocate EEH device */
@@ -68,7 +67,7 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
edev->phb = phb;
INIT_LIST_HEAD(&edev->list);
- return NULL;
+ return edev;
}
/**
@@ -80,16 +79,8 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
*/
void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
{
- struct pci_dn *root = phb->pci_data;
-
/* EEH PE for PHB */
eeh_phb_pe_create(phb);
-
- /* EEH device for PHB */
- eeh_dev_init(root, phb);
-
- /* EEH devices for children OF nodes */
- traverse_pci_dn(root, eeh_dev_init, phb);
}
/**
@@ -105,9 +96,7 @@ static int __init eeh_dev_phb_init(void)
list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
eeh_dev_phb_init_dynamic(phb);
- pr_info("EEH: devices created\n");
-
return 0;
}
-core_initcall(eeh_dev_phb_init);
+core_initcall_sync(eeh_dev_phb_init);
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index f0ddde7..53a11e9 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -290,8 +290,11 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
const __be32 *regs;
struct device_node *parent;
struct pci_dn *pdn;
+#ifdef CONFIG_EEH
+ struct eeh_dev *edev;
+#endif
- pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
+ pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
if (pdn == NULL)
return NULL;
dn->data = pdn;
@@ -320,6 +323,15 @@ void *update_dn_pci_info(struct device_node *dn, void *data)
/* Extended config space */
pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
+ /* Initialize EEH device */
+#ifdef CONFIG_EEH
+ edev = eeh_dev_init(pdn, phb);
+ if (!edev) {
+ kfree(pdn);
+ return NULL;
+ }
+#endif
+
/* Attach to parent node */
INIT_LIST_HEAD(&pdn->child_list);
INIT_LIST_HEAD(&pdn->list);
@@ -465,15 +477,19 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
* pci device found underneath. This routine runs once,
* early in the boot sequence.
*/
-void __init pci_devs_phb_init(void)
+static int __init pci_devs_phb_init(void)
{
struct pci_controller *phb, *tmp;
/* This must be done first so the device nodes have valid pci info! */
list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
pci_devs_phb_init_dynamic(phb);
+
+ return 0;
}
+core_initcall(pci_devs_phb_init);
+
static void pci_dev_pdn_setup(struct pci_dev *pdev)
{
struct pci_dn *pdn;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index a923230..a2f89e6 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -568,6 +568,26 @@ void maple_pci_irq_fixup(struct pci_dev *dev)
DBG(" <- maple_pci_irq_fixup\n");
}
+static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions hopefully.
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+
void __init maple_pci_init(void)
{
struct device_node *np, *root;
@@ -605,19 +625,7 @@ void __init maple_pci_init(void)
if (ht && maple_add_bridge(ht) != 0)
of_node_put(ht);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions hopefully.
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->dn;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
+ ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
/* Tell pci.c to not change any resource allocations. */
pci_add_flags(PCI_PROBE_ONLY);
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index f3a68a0..10c4e8f 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -229,9 +229,6 @@ void __init pas_pci_init(void)
of_node_get(np);
of_node_put(root);
-
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
}
void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 59ab16f..20d7bde 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -878,6 +878,29 @@ void pmac_pci_irq_fixup(struct pci_dev *dev)
#endif /* CONFIG_PPC32 */
}
+#ifdef CONFIG_PPC64
+static int pmac_pci_root_bridge_prepare(struct pci_hot_bridge *bridge)
+{
+ struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+ struct device_node *np, *child;
+
+ if (hose != u3_agp)
+ return 0;
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions for now. We should do something better in the
+ * future though
+ */
+ np = hose->dn;
+ PCI_DN(np)->busno = 0xf0;
+ for_each_child_of_node(np, child)
+ PCI_DN(child)->busno = 0xf0;
+
+ return 0;
+}
+#endif /* CONFIG_PPC64 */
+
void __init pmac_pci_init(void)
{
struct device_node *np, *root;
@@ -914,22 +937,7 @@ void __init pmac_pci_init(void)
if (ht && pmac_add_bridge(ht) != 0)
of_node_put(ht);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions for now. We should do something better in the
- * future though
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->dn;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
- /* pmac_check_ht_link(); */
-
+ ppc_md.pcibios_root_bridge_prepare = pmac_pci_root_bridge_prepare;
#else /* CONFIG_PPC64 */
init_p2pbridge();
init_second_ohare();
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 5982110..b13186d 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -935,9 +935,6 @@ void __init pnv_pci_init(void)
for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
pnv_pci_init_ioda2_phb(np);
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
/* Configure IOMMU DMA hooks */
set_pci_dma_ops(&dma_iommu_ops);
}
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index df6a704..92974aa 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -261,12 +261,8 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
switch (action) {
case OF_RECONFIG_ATTACH_NODE:
pci = np->parent->data;
- if (pci) {
+ if (pci)
update_dn_pci_info(np, pci->phb);
-
- /* Create EEH device for the OF node */
- eeh_dev_init(PCI_DN(np), pci->phb);
- }
break;
default:
err = NOTIFY_DONE;
@@ -482,7 +478,6 @@ static void __init find_and_init_phbs(void)
}
of_node_put(root);
- pci_devs_phb_init();
/*
* PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
