On 04/08/15 11:23, Gabriele Paoloni wrote: > Hi James > > Please see "[PATCH v6] PCI: Store PCIe bus address in struct of_pci_range" > > I think if you apply this patch your problem should be solved... > > If you follow the discussion you see that this patch is going to be part > of the next designware patchset... Yes I just spotted that series after continuing through my email backlog. > Wang Zhou said "You need apply Gabriele's patch before applying this patch." > but he didn't specify which one and obviously this patch should have been part > of the patch-set I assumed he meant your patch 1 in the same series, (given the reply was to patch 2). With the '[PATCH v6] PCI: Store PCIe bus address in struct of_pci_range' applied before patches and 1 and 2 of this series - pcie on the 'Freescale i.MX6 Quad SABRE Lite Board' works fine. I can rescan the bus, load firmware, list nearby APs, and even get MSIs coming from the card. Tested-by: James Morse <james.morse@xxxxxxx> James -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
