On Thu, Jul 30, 2015 at 08:42:53AM -0500, Rob Herring wrote: > On Wed, Jul 29, 2015 at 2:44 PM, Gabriele Paoloni > <gabriele.paoloni@xxxxxxxxxx> wrote: > > Hi Bjorn > > > > Many Thanks for your reply > > > > I have commented back inline with resolutions from my side. > > > > If you're ok with them I'll send it out a new version in the appropriate patchset > > > > Cheers > > > > Gab > > > >> -----Original Message----- > >> From: Bjorn Helgaas [mailto:bhelgaas@xxxxxxxxxx] > >> Sent: Wednesday, July 29, 2015 6:21 PM > >> To: Gabriele Paoloni > >> Cc: arnd@xxxxxxxx; lorenzo.pieralisi@xxxxxxx; Wangzhou (B); > >> robh+dt@xxxxxxxxxx; james.morse@xxxxxxx; Liviu.Dudau@xxxxxxx; linux- > >> pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; > >> devicetree@xxxxxxxxxxxxxxx; Yuanzhichang; Zhudacai; zhangjukuo; > >> qiuzhenfa; Liguozhu (Kenneth) > >> Subject: Re: [PATCH v6] PCI: Store PCIe bus address in struct > >> of_pci_range > >> > >> Hi Gabriele, > >> > >> As far as I can tell, this is not specific to PCIe, so please use "PCI" > >> in > >> the subject as a generic term that includes both PCI and PCIe. > > > > sure agreed > > > >> > >> On Mon, Jul 27, 2015 at 11:17:03PM +0800, Gabriele Paoloni wrote: > >> > From: gabriele paoloni <gabriele.paoloni@xxxxxxxxxx> > >> > > >> > This patch is needed port PCIe designware to new DT parsing API > >> > As discussed in > >> > http://lists.infradead.org/pipermail/linux-arm-kernel/2015- > >> January/317743.html > >> > in designware we have a problem as the PCI addresses in the PCIe > >> controller > >> > address space are required in order to perform correct HW > >> operation. > >> > > >> > In order to solve this problem commit f4c55c5a3 "PCI: designware: > >> > Program ATU with untranslated address" added code to read the > >> PCIe > >> > >> Conventional reference is 12-char SHA1, like this: > >> > >> f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated > >> address") > > > > Agreed, will change this > > > >> > >> > controller start address directly from the DT ranges. > >> > > >> > In the new DT parsing API of_pci_get_host_bridge_resources() > >> hides the > >> > DT parser from the host controller drivers, so it is not possible > >> > for drivers to parse values directly from the DT. > >> > > >> > In http://www.spinics.net/lists/linux-pci/msg42540.html we > >> already tried > >> > to use the new DT parsing API but there is a bug (obviously) in > >> setting > >> > the <*>_mod_base addresses > >> > Applying this patch we can easily set "<*>_mod_base = win- > >> >__res.start" > >> > >> By itself, this patch adds something. It would help me understand it > >> if > >> the *user* of this new something were in the same patch series. > > > > the user is: "[PATCH v5 2/5] PCI: designware: Add ARM64 support" > > I will ask Zhou Wang to include this patch in his patchset > > > > > >> > >> > This patch adds a new field in "struct of_pci_range" to store the > >> > pci bus start address; it fills the field in > >> of_pci_range_parser_one(); > >> > in of_pci_get_host_bridge_resources() it retrieves the resource > >> entry > >> > after it is created and added to the resource list and uses > >> > entry->__res.start to store the pci controller address > >> > >> struct of_pci_range is starting to get confusing to non-OF folks like > >> me. > >> It now contains: > >> > >> u32 pci_space; > >> u64 pci_addr; > >> u64 cpu_addr; > >> u64 bus_addr; > >> > >> Can you explain what all these things mean, and maybe even add one-line > >> comments to the structure? > > > > sure I can add comments inline in the code > > > >> > >> pci_space: The only uses I see are to determine whether to print > >> "Prefetch". I don't see any real functionality that uses this. > > > > Looking at the code I agree. it's seems to be used only in powerpc > > and microblaze to print out. > > However from my understanding pci_space is the phys.hi field of the > > ranges property: it defines the properties of the address space associated > > to the PCI address. if you're curious you can find a nice and quick to read > > "guide" in http://devicetree.org/MPC5200:PCI > > > >> > >> pci_addr: I assume this is a PCI bus address, like what you would see > >> if > >> you put an analyzer on the bus/link. This address could go in a BAR. > > > > Yes, this is the PCI start address of the range: phys.mid + phys.low in the > > guide mentioned above > > > >> > >> cpu_addr: I assume this is a CPU physical address, like what you would > >> see > >> in /proc/iomem and what you would pass to ioremap(). > > > > Yes correct > > > >> > >> bus_addr: ? > >> > > > > According to the guide above, this is the address into which the pci_address > > get translated to and that is passed to the root complex. Between the root > > complex and the CPU there can be intermediate translation layers: see that to > > get pci_address we call "of_translate_address"; this will apply all the > > translation layers (ranges in the DT) that it finds till it comes to the root > > node of the DT (thus retrieving the CPU address). > > Now said that, for designware we need the first translated PCI address, that we call > > I think you mean "translated CPU address." The flow of addresses looks > like this: > > CPU -> CPU bus address -> bus fabric address decoding -> bus address > -> DW PCI -> PCI address > > This is quite common that an IP block does not see the full address. > It is unusual that the IP block needs to know its full address on the > slave side. It is quite common for the master side and the kernel > deals with that all the time with DMA mapping > > > here bus_addr after Rob Herring suggested the name...honestly I cannot think of a > > different name > > Thinking about this some more, is this really a translation versus > just a stripping of high bits? Does the DW IP have less than 32-bits > address? If so, we could express differently and just mask the CPU > address within the driver instead. I would like this much better if it would be sufficient. If I understand this correctly, this is all for the MMIO path, i.e., it has nothing to do with DMA addresses generated by the device being translated to main memory addresses. ACPI has a fairly good abstract model for describing the address translations the kernel and drivers need to know about. We should assume we'll need to describe this hardware via ACPI in addition to DT eventually, so I'm trying to figure out how we would map this into ACPI terms. If the driver really needs this intermediate address (the "bus address" above), I think that would mean adding a second ACPI bridge device. The first bridge would have a _TRA showing the offset from CPU physical address to bus address, and the second bridge would have a _TRA showing the offset from bus address to PCI address. If you only had a single ACPI bridge device, you'd only have one _TRA (from CPU physical to PCI bus address), and there'd be no way for the driver to learn about the intermediate bus address. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
