On Wed, Jul 29, 2015 at 04:28:01PM +0100, Jayachandran C wrote: > Enable pci-host-generic driver available in arm64. This needs > drivers/pci/setup-irq.o as well. You should move the Kconfig change to the previous patch, and create another a stand-alone patch (that you will send as first in the patch sequence) to compile setup-irq.c on ARM64. Thanks, Lorenzo > Signed-off-by: Jayachandran C <jchandra@xxxxxxxxxxxx> > --- > drivers/pci/Makefile | 1 + > drivers/pci/host/Kconfig | 2 +- > 2 files changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile > index 73e4af4..be3f631 100644 > --- a/drivers/pci/Makefile > +++ b/drivers/pci/Makefile > @@ -33,6 +33,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o > # > obj-$(CONFIG_ALPHA) += setup-irq.o > obj-$(CONFIG_ARM) += setup-irq.o > +obj-$(CONFIG_ARM64) += setup-irq.o > obj-$(CONFIG_UNICORE32) += setup-irq.o > obj-$(CONFIG_SUPERH) += setup-irq.o > obj-$(CONFIG_MIPS) += setup-irq.o > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig > index c132bdd..675c2d1 100644 > --- a/drivers/pci/host/Kconfig > +++ b/drivers/pci/host/Kconfig > @@ -53,7 +53,7 @@ config PCI_RCAR_GEN2_PCIE > > config PCI_HOST_GENERIC > bool "Generic PCI host controller" > - depends on ARM && OF > + depends on (ARM || ARM64) && OF > help > Say Y here if you want to support a simple generic PCI host > controller, such as the one emulated by kvmtool. > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html