Hi Kashyap, Le Tuesday 07 July 2015 à 14:48 +0530, Kashyap Desai a écrit : > > -----Original Message----- > > From: Jean Delvare [mailto:jdelvare@xxxxxxx] > > Sent: Tuesday, July 07, 2015 2:14 PM > > To: Kashyap Desai > > Cc: Bjorn Helgaas; Robin H. Johnson; Adam Radford; Neela Syam Kolli; > linux- > > scsi@xxxxxxxxxxxxxxx; arkadiusz.bubala@xxxxxxxxxx; Matthew Garrett; > Sumit > > Saxena; Uday Lingala; PDL,MEGARAIDLINUX; linux-pci@xxxxxxxxxxxxxxx; > linux- > > kernel@xxxxxxxxxxxxxxx; Myron Stowe > > Subject: Re: megaraid_sas: "FW in FAULT state!!", how to get more debug > > output? [BKO63661] > > > > Hi Kashyap, > > > > On Thu, 28 May 2015 19:05:35 +0530, Kashyap Desai wrote: > > > Bjorn/Robin, > > > > > > Apologies for delay. Here is one quick suggestion as we have seen > > > similar issue (not exactly similar, but high probably to have same > > > issue) while controller is configured on VM as pass-through and VM > reboot > > abruptly. > > > In that particular issue, driver interact with FW which may require > > > chip reset to bring controller to operation state. > > > > > > Relevant patch was submitted for only Older controller as it was only > > > seen for few MegaRaid controller. Below patch already try to do chip > > > reset, but only for limited controllers...I have attached one more > > > patch which does chip reset from driver load time for > > > Thunderbolt/Invader/Fury etc. (In your case you have Thunderbolt > > > controller, so attached patch is required.) > > > > > > http://www.spinics.net/lists/linux-scsi/msg67288.html > > > > > > Please post the result with attached patch. > > > > Good news! Customer tested your patch and said it fixed the problem :-) > > > > I am now in the process of backporting the patch to the SLES 11 SP3 > > kernel for further testing. I'll let you know how it goes. Thank you > > very much for your assistance. For the record I was able to backport the patch by myself to SLES 11 SP3, it's currently under testing by the customer. > Thanks for confirmation. Whatever patch I submitted to you, we have added > recently (as part of common interface approach to do chip reset at load > time). We will be submitting that patch to mainline soon. I am about to commit the patch that was successfully tested by the customer on SLES 12, but I'm a bit confused. The upstream patch you referred to is: https://git.kernel.org/cgit/linux/kernel/git/jejb/scsi.git/commit/?h=for-next&id=6431f5d7c6025f8b007af06ea090de308f7e6881 [SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel But the patch I used is the one you sent by e-mail on May 28th. It is completely different! So what am I supposed to do? Use the patch you sent (and that was tested by the customer) for SLES 11 SP3 and SLES 12? Or was it just for testing and the proper way of fixing the problem would be to backport the upstream commit? Please advise, -- Jean Delvare SUSE L3 Support -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html