The patch introduces two bitmaps to trace the IO and M32 segments
consumed by one particular PE, which can be released once the PE
is destroyed during PCI unplugging time. Also, we're using fixed
quantity of bits to trace the used IO and M32 segments by PEs in
one particular PHB. Besides, @pe_array is put to the location
adjacent to @pe_alloc on account of their close relation.
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
v5:
* Split from PATCH[v4 04/21]
---
arch/powerpc/platforms/powernv/pci-ioda.c | 17 +++++------------
arch/powerpc/platforms/powernv/pci.h | 11 ++++++-----
2 files changed, 11 insertions(+), 17 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 71afb38..53d0efd 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2992,7 +2992,8 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
while (index < phb->ioda.total_pe &&
region.start <= region.end) {
- phb->ioda.io_segmap[index] = pe->pe_number;
+ set_bit(index, phb->ioda.io_segmap);
+ set_bit(index, pe->io_segmap);
rc = opal_pci_map_pe_mmio_window(phb->opal_id,
pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index);
if (rc != OPAL_SUCCESS) {
@@ -3017,7 +3018,8 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose,
while (index < phb->ioda.total_pe &&
region.start <= region.end) {
- phb->ioda.m32_segmap[index] = pe->pe_number;
+ set_bit(index, phb->ioda.m32_segmap);
+ set_bit(index, pe->m32_segmap);
rc = opal_pci_map_pe_mmio_window(phb->opal_id,
pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index);
if (rc != OPAL_SUCCESS) {
@@ -3196,7 +3198,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
{
struct pci_controller *hose;
struct pnv_phb *phb;
- unsigned long size, m32map_off, pemap_off, iomap_off = 0;
+ unsigned long size, pemap_off;
const __be64 *prop64;
const __be32 *prop32;
int len;
@@ -3281,19 +3283,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
/* Allocate aux data & arrays. We don't have IO ports on PHB3 */
size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
- m32map_off = size;
- size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]);
- if (phb->type == PNV_PHB_IODA1) {
- iomap_off = size;
- size += phb->ioda.total_pe * sizeof(phb->ioda.io_segmap[0]);
- }
pemap_off = size;
size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
aux = memblock_virt_alloc(size, 0);
phb->ioda.pe_alloc = aux;
- phb->ioda.m32_segmap = aux + m32map_off;
- if (phb->type == PNV_PHB_IODA1)
- phb->ioda.io_segmap = aux + iomap_off;
phb->ioda.pe_array = aux + pemap_off;
set_bit(phb->ioda.reserved_pe, phb->ioda.pe_alloc);
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 54657f4..0a8cecb 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -54,6 +54,8 @@ struct pnv_ioda_pe {
* by slave PEs will be contributed to the master PE. One
* PE can own multiple IO and M32 segments.
*/
+ unsigned long io_segmap[8];
+ unsigned long m32_segmap[8];
unsigned long m64_segmap[8];
/* "Weight" assigned to the PE for the sake of DMA resource
@@ -154,16 +156,15 @@ struct pnv_phb {
unsigned int io_segsize;
unsigned int io_pci_base;
- /* PE allocation bitmap */
+ /* PE allocation */
unsigned long *pe_alloc;
- /* PE allocation mutex */
+ struct pnv_ioda_pe *pe_array;
struct mutex pe_alloc_mutex;
/* M32 & IO segment maps */
+ unsigned long io_segmap[8];
+ unsigned long m32_segmap[8];
unsigned long m64_segmap[8];
- unsigned int *m32_segmap;
- unsigned int *io_segmap;
- struct pnv_ioda_pe *pe_array;
/* IRQ chip */
int irq_chip_init;
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
