Re: [PATCH v9 2/4] PCI: X-Gene: Add the APM X-Gene v1 PCIe MSI/MSIX termination driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/05/15 19:27, Duc Dang wrote:
> APM X-Gene v1 SoC supports its own implementation of MSI, which is not
> compliant to GIC V2M specification for MSI Termination.
> 
> There is single MSI block in X-Gene v1 SOC which serves all 5 PCIe ports.
> This MSI block supports 2048 MSI termination ports coalesced into 16
> physical HW IRQ lines and shared across all 5 PCIe ports.
> 
> As there are only 16 HW IRQs to serve 2048 MSI vectors, to support
> set_affinity correctly for each MSI vectors, the 16 HW IRQs are statically
> allocated to 8 X-Gene v1 cores (2 HW IRQs for each cores). To steer MSI
> interrupt to target CPU, MSI vector is moved around these HW IRQs lines.
> With this approach, the total MSI vectors this driver supports is reduced
> to 256.
> 
> Signed-off-by: Duc Dang <dhdang@xxxxxxx>
> Signed-off-by: Tanmay Inamdar <tinamdar@xxxxxxx>
> Reviewed-by: Marc Zyngier <marc.zyngier@xxxxxxx>
> ---
>  drivers/pci/host/Kconfig         |  10 +
>  drivers/pci/host/Makefile        |   1 +
>  drivers/pci/host/pci-xgene-msi.c | 595 +++++++++++++++++++++++++++++++++++++++
>  drivers/pci/host/pci-xgene.c     |  21 ++
>  4 files changed, 627 insertions(+)
>  create mode 100644 drivers/pci/host/pci-xgene-msi.c
> 
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 1dfb567..a93fda8 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -89,11 +89,21 @@ config PCI_XGENE
>         depends on ARCH_XGENE
>         depends on OF
>         select PCIEPORTBUS
> +       select PCI_MSI_IRQ_DOMAIN if PCI_MSI
>         help
>           Say Y here if you want internal PCI support on APM X-Gene SoC.
>           There are 5 internal PCIe ports available. Each port is GEN3 capable
>           and have varied lanes from x1 to x8.
> 
> +config PCI_XGENE_MSI
> +       bool "X-Gene v1 PCIe MSI feature"
> +       depends on PCI_XGENE && PCI_MSI
> +       default y
> +       help
> +         Say Y here if you want PCIE MSI support for APM X-Gene v1 SoC.
> +         This MSI driver will provide MSI support for 5 PCIe ports of
> +         APM X-Gene v1 SoC
> +
>  config PCI_LAYERSCAPE
>         bool "Freescale Layerscape PCIe controller"
>         depends on OF && ARM
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index f733b4e..1957431 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
>  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
>  obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
>  obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
> +obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
>  obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
>  obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
>  obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
> diff --git a/drivers/pci/host/pci-xgene-msi.c b/drivers/pci/host/pci-xgene-msi.c
> new file mode 100644
> index 0000000..461cb11
> --- /dev/null
> +++ b/drivers/pci/host/pci-xgene-msi.c
> @@ -0,0 +1,595 @@
> +/*
> + * APM X-Gene MSI Driver
> + *
> + * Copyright (c) 2014, Applied Micro Circuits Corporation
> + * Author: Tanmay Inamdar <tinamdar@xxxxxxx>
> + *        Duc Dang <dhdang@xxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/cpu.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_irq.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_pci.h>
> +
> +#define MSI_IR0                        0x000000
> +#define MSI_INT0               0x800000
> +#define IDX_PER_GROUP          8
> +#define IRQS_PER_IDX           16
> +#define NR_HW_IRQS             16
> +#define NR_MSI_VEC             (IDX_PER_GROUP * IRQS_PER_IDX * NR_HW_IRQS)
> +
> +struct xgene_msi_group {
> +       struct xgene_msi                *msi;
> +       int                             gic_irq;
> +       u32                             msi_grp;
> +};
> +
> +struct xgene_msi {
> +       struct device_node              *node;
> +       struct msi_controller           mchip;
> +       struct irq_domain               *domain;
> +       u64                             msi_addr;
> +       void __iomem                    *msi_regs;
> +       unsigned long                   *bitmap;
> +       struct mutex                    bitmap_lock;
> +       struct xgene_msi_group          *msi_groups;
> +       int                             num_cpus;
> +};
> +
> +/* Global data */
> +static struct xgene_msi xgene_msi_ctrl;
> +
> +static struct irq_chip xgene_msi_top_irq_chip = {
> +       .name           = "X-Gene1 MSI",
> +       .irq_enable     = pci_msi_unmask_irq,
> +       .irq_disable    = pci_msi_mask_irq,
> +       .irq_mask       = pci_msi_mask_irq,
> +       .irq_unmask     = pci_msi_unmask_irq,
> +};
> +
> +static struct  msi_domain_info xgene_msi_domain_info = {
> +       .flags  = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> +                 MSI_FLAG_PCI_MSIX),
> +       .chip   = &xgene_msi_top_irq_chip,
> +};
> +
> +/*
> + * X-Gene v1 has 16 groups of MSI termination registers MSInIRx, where
> + * n is group number (0..F), x is index of registers in each group (0..7)
> + * The registers layout is like following:
> + * MSI0IR0                     base_addr
> + * MSI0IR1                     base_addr +  0x10000
> + * ...                         ...
> + * MSI0IR6                     base_addr +  0x60000
> + * MSI0IR7                     base_addr +  0x70000
> + * MSI1IR0                     base_addr +  0x80000
> + * MSI1IR1                     base_addr +  0x90000
> + * ...                         ...
> + * MSI1IR7                     base_addr +  0xF0000
> + * MSI2IR0                     base_addr + 0x100000
> + * ...                         ...
> + * MSIFIR0                     base_addr + 0x780000
> + * MSIFIR1                     base_addr + 0x790000
> + * ...                         ...
> + * MSIFIR7                     base_addr + 0x7F0000
> + * MSIINT0                     base_addr + 0x800000
> + * MSIINT1                     base_addr + 0x810000
> + * ...                         ...
> + * MSIINTF                     base_addr + 0x8F0000
> + *
> + * Each index register support 16 MSI vectors (0..15) to generate interrupt.
> + * There are total 16 GIC IRQs assigned for these 16 groups of MSI termination
> + * registers.
> + *
> + * Each MSI termination group has 1 MSIINTn register (n is 0..15) to indicate
> + * the MSI pending status caused by 1 of its 8 index registers.
> + */
> +
> +/* MSInIRx read helper */
> +static inline u32 xgene_msi_ir_read(struct xgene_msi *msi,
> +                                   u32 msi_grp, u32 msir_idx)
> +{
> +       return readl_relaxed(msi->msi_regs + MSI_IR0 +
> +                             (msi_grp << 19) + (msir_idx << 16));
> +}
> +
> +/* MSIINTn read helper */
> +static inline u32 xgene_msi_int_read(struct xgene_msi *msi, u32 msi_grp)
> +{
> +       return readl_relaxed(msi->msi_regs + MSI_INT0 + (msi_grp << 16));
> +}
> +
> +/* With 2048 MSI vectors supported, the MSI message can be construct using
> + * following scheme:
> + * - Divide into 8 256-vector groups
> + *             Group 0: 0-255
> + *             Group 1: 256-511
> + *             Group 2: 512-767
> + *             ...
> + *             Group 7: 1792-2047
> + * - Each 256-vector group is divided into 16 16-vector groups
> + *     As an example: 16 16-vector groups for 256-vector group 0-255 is
> + *             Group 0: 0-15
> + *             Group 1: 16-32
> + *             ...
> + *             Group 15: 240-255
> + * - The termination address of MSI vector in 256-vector group n and 16-vector
> + * group x is the address of MSIxIRn
> + * - The data for MSI vector in 16-vector group x is x
> + */
> +static inline u32 hwirq_to_reg_set(unsigned long hwirq)
> +{
> +       return (hwirq / (NR_HW_IRQS * IRQS_PER_IDX));
> +}
> +
> +static inline u32 hwirq_to_group(unsigned long hwirq)
> +{
> +       return (hwirq % NR_HW_IRQS);
> +}
> +
> +static inline u32 hwirq_to_msi_data(unsigned long hwirq)
> +{
> +       return ((hwirq / NR_HW_IRQS) % IRQS_PER_IDX);
> +}

These "inline" are superfluous (including the ones for the HW
accessors). The compiler is bright enough to do it itself.

> +
> +static void xgene_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> +{
> +       struct xgene_msi *msi = irq_data_get_irq_chip_data(data);
> +       u32 reg_set = hwirq_to_reg_set(data->hwirq);
> +       u32 group = hwirq_to_group(data->hwirq);
> +       u64 target_addr = msi->msi_addr + (((8 * group) + reg_set) << 16);
> +
> +       msg->address_hi = upper_32_bits(target_addr);
> +       msg->address_lo = lower_32_bits(target_addr);
> +       msg->data = hwirq_to_msi_data(data->hwirq);
> +}
> +
> +/*
> + * X-Gene v1 only has 16 MSI GIC IRQs for 2048 MSI vectors.
> + * To maintain the expected behaviour of .set_affinity for each MSI
> + * interrupt, the 16 MSI GIC IRQs are statically allocated to 8 X-Gene
> + * v1 cores (2 GIC IRQs for each core). The MSI vector is moved fom 1
> + * MSI GIC IRQ to another MSI GIC IRQ to steer its MSI interrupt to
> + * correct X-Gene v1 core. As a consequence, the total MSI vectors that
> + * X-Gene v1 supports will be reduced to 256 (2048/8) vectors.
> + */
> +static inline int hwirq_to_cpu(unsigned long hwirq)
> +{
> +       return ((hwirq % NR_HW_IRQS) % xgene_msi_ctrl.num_cpus);
> +}
> +
> +static inline unsigned long hwirq_to_canonical_hwirq(unsigned long hwirq)
> +{
> +       return (hwirq - (hwirq % xgene_msi_ctrl.num_cpus));
> +}

Hmmm. This is weird. The canonical hwirq is defined as the IRQ seen from
CPU0. So it is possible to write hwirq_to_canonical_hwirq as:

static irq_hw_number_t hwirq_to_canonical_hwirq(irq_hw_number_t hwirq)
{
	return hwirq - hwirq_to_cpu(hwirq);
}

But you've defined hwirq_to_cpu as "(hwirq % NR_HW_IRQS) %
xgene_msi_ctrl.num_cpus", which doesn't match your definition of a
canonical hwirq. Can you explain the discrepancy?

> +
> +static int xgene_msi_set_affinity(struct irq_data *irq_data,
> +                                 const struct cpumask *mask, bool force)
> +{
> +       int target_cpu = cpumask_first(mask);
> +       int curr_cpu;
> +
> +       curr_cpu = hwirq_to_cpu(irq_data->hwirq);
> +       if (curr_cpu == target_cpu)
> +               return IRQ_SET_MASK_OK_DONE;
> +
> +       /* Update MSI number to target the new CPU */
> +       irq_data->hwirq = irq_data->hwirq + (target_cpu - curr_cpu);

irq_data->hwirq = hwirq_to_canonical_hwirq(irq_data->hwirq) + target_cpu;

> +
> +       return IRQ_SET_MASK_OK;
> +}

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux