Re: [PATCH v4 19/21] drivers/of: Support adding sub-tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 01, 2015 at 04:03:06PM +1000, Gavin Shan wrote:
>The requirement is raised when developing the PCI hotplug feature
>for PowerPC PowerNV platform, which runs on top of skiboot firmware.
>When plugging PCI adapter to one PCI slot, the firmware rescans the
>slot and build FDT (Flat Device Tree) blob, which is sent to the
>PowerNV PCI hotplug driver for processing. The new constructed device
>nodes from the FDT blob are expected to be attached to the device
>node of the PCI slot. Unfortunately, it seems we don't have a API
>to support the scenario. The patch intends to support it by newly
>introduced function of_fdt_add_subtree(), the design behind it is
>shown as below:
>
>   * When the sub-tree FDT blob, which is owned by firmware, is
>     received by kernel. It's copied over to the blob, which is
>     dynamically allocated. Since then, the FDT blob owned by
>     firmware isn't touched.
>   * Rework unflatten_dt_node() so that the device nodes in current
>     and deeper depth have been constructed from the FDT blob. All
>     device nodes are marked with flag OF_DYNAMIC_HYBIRD, which is
>     similar to OF_DYNAMIC. However, device node with the flag set
>     can be free'd, but in the way other than that for OF_DYNAMIC
>     device nodes.
>   * of_fdt_add_subtree() is the introduced API to do the work.
>

There are already lots of discussion on how to reuse overlay for my case.
Thanks to all for your time on this. I spend some time thinking about it
last night and this morning. I would like to summarize it as below. It's
for sure almost all ideas coming from your guys and I'm just documenting
it. If there are obvious problems in the following summary, please let me
know so that I can fix them as early as possible to save more time.

================
SKIBOOT & KERNEL
================

The idea came from Ben and I'm following to implement it as follows:

- One counter is mantained: cur_counter = 0;
- PCI hot plugging happens happens as:
  * Kernel gets skiboot's cur_counter with OPAL API, which is (x).
  * Skiboot does hot plugging and rescans the slot, then populate
    the device-tree nodes with (++cur_counter), which means the
    counter is turned to (x+1).
  * Kernel retrieves the FDT overlay blob on the device-tree changes
    since last time/token ((x)). Kernel unflattens it and applies the
    changes by overlay. The slot simply records the overlay (IDR) ID
    for the device-tree change.
- PCI hot unplugging happens as:
  * Revert the changes simply if the slot had valid IDR ID. Otherwise,
    the device nodes are flatten during bootup time, we just remove them
    as we're doing now. Note that device nodes can't be free'd because
    the memory chunks consumed by them are allocated from memblock or
    reserved by skiboot.
- Some questions/problems:
  * I don't understand how kexec can figure out the device-tree with
    applied changes from overlay. I assume kexec is simply using the
    FDT blob from skiboot as seen by the first kernel during frest
    boot.

Kernel APIs:
  * id = of_overlay_create(); of_overlay_destroy(id)
Skiboot API:
  * int64_t opal_get_overlay_dt(uint64_t *counter, void *blob, uint32_t len)
    blob == NULL, get current counter.
    blob != NULL, get overlay blob since (*counter). Skiboot also
    returns the last counter.
    The memory chunk for "blob" is always owned by kernel, which doesn't know
    the memory size to hold the overlay FDT blob. So we have to try with
    discret 64KB, which is PAGE_SIZE. After the overlay blob is unflatten
    and applied, the memory chunk can be free. We don't have to keep it
    for reverting the changes introduced by the overlay.

=============================
OVERLAY FDT BLOB FROM SKIBOOT
=============================

ROOT {
   A {
      target=<target node's phandle>
      __overlay__ {

      }
   }

   B {
      target=<target node's phandle>
      __overlay__ {

      }
   }
}

Thanks,
Gavin

>Cc: Grant Likely <grant.likely@xxxxxxxxxx>
>Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
>---
> drivers/of/dynamic.c   |  19 +++++--
> drivers/of/fdt.c       | 133 ++++++++++++++++++++++++++++++++++++++++---------
> include/linux/of.h     |   2 +
> include/linux/of_fdt.h |   1 +
> 4 files changed, 127 insertions(+), 28 deletions(-)
>
>diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
>index 3351ef4..f562080 100644
>--- a/drivers/of/dynamic.c
>+++ b/drivers/of/dynamic.c
>@@ -330,13 +330,22 @@ void of_node_release(struct kobject *kobj)
> 		return;
> 	}
>
>-	if (!of_node_check_flag(node, OF_DYNAMIC))
>+	/* Release the subtree */
>+	if (node->subtree) {
>+		kfree(node->subtree);
>+		node->subtree = NULL;
>+	}
>+
>+	if (!of_node_check_flag(node, OF_DYNAMIC) &&
>+	    !of_node_check_flag(node, OF_DYNAMIC_HYBIRD))
> 		return;
>
> 	while (prop) {
> 		struct property *next = prop->next;
>-		kfree(prop->name);
>-		kfree(prop->value);
>+		if (of_node_check_flag(node, OF_DYNAMIC)) {
>+			kfree(prop->name);
>+			kfree(prop->value);
>+		}
> 		kfree(prop);
> 		prop = next;
>
>@@ -345,7 +354,9 @@ void of_node_release(struct kobject *kobj)
> 			node->deadprops = NULL;
> 		}
> 	}
>-	kfree(node->full_name);
>+
>+	if (of_node_check_flag(node, OF_DYNAMIC))
>+		kfree(node->full_name);
> 	kfree(node->data);
> 	kfree(node);
> }
>diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
>index cde35c5d01..7659560 100644
>--- a/drivers/of/fdt.c
>+++ b/drivers/of/fdt.c
>@@ -28,6 +28,10 @@
> #include <asm/setup.h>  /* for COMMAND_LINE_SIZE */
> #include <asm/page.h>
>
>+#include "of_private.h"
>+
>+static int cur_node_depth;
>+
> /*
>  * of_fdt_limit_memory - limit the number of regions in the /memory node
>  * @limit: maximum entries
>@@ -168,20 +172,20 @@ static void *unflatten_dt_alloc(void **mem, unsigned long size,
>  * @dad: Parent struct device_node
>  * @fpsize: Size of the node path up at the current depth.
>  */
>-static void * unflatten_dt_node(void *blob,
>-				void *mem,
>-				int *poffset,
>-				struct device_node *dad,
>-				struct device_node **nodepp,
>-				unsigned long fpsize,
>-				bool dryrun)
>+static void *unflatten_dt_node(void *blob,
>+			       void *mem,
>+			       int *poffset,
>+			       struct device_node *dad,
>+			       struct device_node **nodepp,
>+			       unsigned long fpsize,
>+			       bool dryrun,
>+			       bool dynamic)
> {
> 	const __be32 *p;
> 	struct device_node *np;
> 	struct property *pp, **prev_pp = NULL;
> 	const char *pathp;
> 	unsigned int l, allocl;
>-	static int depth = 0;
> 	int old_depth;
> 	int offset;
> 	int has_name = 0;
>@@ -219,12 +223,18 @@ static void * unflatten_dt_node(void *blob,
> 		}
> 	}
>
>-	np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
>+	if (dynamic)
>+		np = kzalloc(sizeof(struct device_node) + allocl, GFP_KERNEL);
>+	else
>+		np = unflatten_dt_alloc(&mem,
>+				sizeof(struct device_node) + allocl,
> 				__alignof__(struct device_node));
> 	if (!dryrun) {
> 		char *fn;
> 		of_node_init(np);
> 		np->full_name = fn = ((char *)np) + sizeof(*np);
>+		if (dynamic)
>+			of_node_set_flag(np, OF_DYNAMIC_HYBIRD);
> 		if (new_format) {
> 			/* rebuild full path for new format */
> 			if (dad && dad->parent) {
>@@ -267,8 +277,12 @@ static void * unflatten_dt_node(void *blob,
> 		}
> 		if (strcmp(pname, "name") == 0)
> 			has_name = 1;
>-		pp = unflatten_dt_alloc(&mem, sizeof(struct property),
>-					__alignof__(struct property));
>+
>+		if (dynamic)
>+			pp = kzalloc(sizeof(struct property), GFP_KERNEL);
>+		else
>+			pp = unflatten_dt_alloc(&mem, sizeof(struct property),
>+						__alignof__(struct property));
> 		if (!dryrun) {
> 			/* We accept flattened tree phandles either in
> 			 * ePAPR-style "phandle" properties, or the
>@@ -309,8 +323,13 @@ static void * unflatten_dt_node(void *blob,
> 		if (pa < ps)
> 			pa = p1;
> 		sz = (pa - ps) + 1;
>-		pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
>-					__alignof__(struct property));
>+
>+		if (dynamic)
>+			pp = kzalloc(sizeof(struct property) + sz, GFP_KERNEL);
>+		else
>+			pp = unflatten_dt_alloc(&mem,
>+						sizeof(struct property) + sz,
>+						__alignof__(struct property));
> 		if (!dryrun) {
> 			pp->name = "name";
> 			pp->length = sz;
>@@ -334,13 +353,21 @@ static void * unflatten_dt_node(void *blob,
> 			np->type = "<NULL>";
> 	}
>
>-	old_depth = depth;
>-	*poffset = fdt_next_node(blob, *poffset, &depth);
>-	if (depth < 0)
>-		depth = 0;
>-	while (*poffset > 0 && depth > old_depth)
>-		mem = unflatten_dt_node(blob, mem, poffset, np, NULL,
>-					fpsize, dryrun);
>+	old_depth = cur_node_depth;
>+	*poffset = fdt_next_node(blob, *poffset, &cur_node_depth);
>+	while (*poffset > 0) {
>+		if (cur_node_depth < old_depth)
>+			break;
>+
>+		if (cur_node_depth == old_depth)
>+			mem = unflatten_dt_node(blob, mem, poffset,
>+						dad, NULL, fpsize,
>+						dryrun, dynamic);
>+		else if (cur_node_depth > old_depth)
>+			mem = unflatten_dt_node(blob, mem, poffset,
>+						np, NULL, fpsize,
>+						dryrun, dynamic);
>+	}
>
> 	if (*poffset < 0 && *poffset != -FDT_ERR_NOTFOUND)
> 		pr_err("unflatten: error %d processing FDT\n", *poffset);
>@@ -379,8 +406,8 @@ static void * unflatten_dt_node(void *blob,
>  * for the resulting tree
>  */
> static void __unflatten_device_tree(void *blob,
>-			     struct device_node **mynodes,
>-			     void * (*dt_alloc)(u64 size, u64 align))
>+				struct device_node **mynodes,
>+				void * (*dt_alloc)(u64 size, u64 align))
> {
> 	unsigned long size;
> 	int start;
>@@ -405,7 +432,9 @@ static void __unflatten_device_tree(void *blob,
>
> 	/* First pass, scan for size */
> 	start = 0;
>-	size = (unsigned long)unflatten_dt_node(blob, NULL, &start, NULL, NULL, 0, true);
>+	cur_node_depth = 1;
>+	size = (unsigned long)unflatten_dt_node(blob, NULL, &start, NULL,
>+						NULL, 0, true, false);
> 	size = ALIGN(size, 4);
>
> 	pr_debug("  size is %lx, allocating...\n", size);
>@@ -420,7 +449,8 @@ static void __unflatten_device_tree(void *blob,
>
> 	/* Second pass, do actual unflattening */
> 	start = 0;
>-	unflatten_dt_node(blob, mem, &start, NULL, mynodes, 0, false);
>+	cur_node_depth = 1;
>+	unflatten_dt_node(blob, mem, &start, NULL, mynodes, 0, false, false);
> 	if (be32_to_cpup(mem + size) != 0xdeadbeef)
> 		pr_warning("End of tree marker overwritten: %08x\n",
> 			   be32_to_cpup(mem + size));
>@@ -448,6 +478,61 @@ void of_fdt_unflatten_tree(unsigned long *blob,
> }
> EXPORT_SYMBOL_GPL(of_fdt_unflatten_tree);
>
>+static void populate_sysfs_for_child_nodes(struct device_node *parent)
>+{
>+	struct device_node *child;
>+
>+	for_each_child_of_node(parent, child) {
>+		__of_attach_node_sysfs(child);
>+		populate_sysfs_for_child_nodes(child);
>+	}
>+}
>+
>+/**
>+ * of_fdt_add_substree - Create sub-tree of device nodes
>+ * @parent: parent device node to which the sub-tree will attach
>+ * @blob: flat device tree blob representing the sub-tree
>+ *
>+ * Copy over the FDT blob, which passed from firmware, and then
>+ * unflatten the sub-tree.
>+ */
>+void of_fdt_add_subtree(struct device_node *parent, void *blob)
>+{
>+	int start = 0;
>+
>+	/* Validate the header */
>+	if (!blob || fdt_check_header(blob)) {
>+		pr_err("%s: Invalid device-tree blob header at 0x%p\n",
>+		       __func__, blob);
>+		return;
>+	}
>+
>+	/* Free the flat blob for last time lazily */
>+	if (parent->subtree) {
>+		kfree(parent->subtree);
>+		parent->subtree = NULL;
>+	}
>+
>+	/* Copy over the flat blob */
>+	parent->subtree = kzalloc(fdt_totalsize(blob), GFP_KERNEL);
>+	if (!parent->subtree) {
>+		pr_err("%s: Cannot copy over device-tree blob\n",
>+		       __func__);
>+		return;
>+	}
>+
>+	memcpy(parent->subtree, blob, fdt_totalsize(blob));
>+
>+	/* Unflatten it */
>+	mutex_lock(&of_mutex);
>+	cur_node_depth = 1;
>+	unflatten_dt_node(parent->subtree, NULL, &start, parent, NULL,
>+			  strlen(parent->full_name), false, true);
>+	populate_sysfs_for_child_nodes(parent);
>+	mutex_unlock(&of_mutex);
>+}
>+EXPORT_SYMBOL(of_fdt_add_subtree);
>+
> /* Everything below here references initial_boot_params directly. */
> int __initdata dt_root_addr_cells;
> int __initdata dt_root_size_cells;
>diff --git a/include/linux/of.h b/include/linux/of.h
>index ddeaae6..ac50b02 100644
>--- a/include/linux/of.h
>+++ b/include/linux/of.h
>@@ -60,6 +60,7 @@ struct device_node {
> 	struct	device_node *sibling;
> 	struct	kobject kobj;
> 	unsigned long _flags;
>+	void	*subtree;
> 	void	*data;
> #if defined(CONFIG_SPARC)
> 	const char *path_component_name;
>@@ -222,6 +223,7 @@ static inline unsigned long of_read_ulong(const __be32 *cell, int size)
> #define OF_DETACHED	2 /* node has been detached from the device tree */
> #define OF_POPULATED	3 /* device already created for the node */
> #define OF_POPULATED_BUS	4 /* of_platform_populate recursed to children of this node */
>+#define OF_DYNAMIC_HYBIRD	5 /* similar to OF_DYNAMIC, but partially */
>
> #define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
> #define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
>diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
>index 587ee50..1fb47d7 100644
>--- a/include/linux/of_fdt.h
>+++ b/include/linux/of_fdt.h
>@@ -39,6 +39,7 @@ extern int of_fdt_match(const void *blob, unsigned long node,
> 			const char *const *compat);
> extern void of_fdt_unflatten_tree(unsigned long *blob,
> 			       struct device_node **mynodes);
>+extern void of_fdt_add_subtree(struct device_node *parent, void *blob);
>
> /* TBD: Temporary export of fdt globals - remove when code fully merged */
> extern int __initdata dt_root_addr_cells;
>-- 
>2.1.0
>

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux