From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
While looking at the printout issue, I stumbled more than once over
the various 0/1 assignments which are either commented in strange ways
or force to lookup the meaning.
Use proper constants and fix the misleading comments. While at it
remove pointless 0 assignments in native_disable_io_apic() which have
no value for understanding the code.
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
Cc: x86@xxxxxxxxxx
Signed-off-by: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/io_apic.h | 16 +++++--
arch/x86/kernel/apic/io_apic.c | 100 ++++++++++++++++++++--------------------
2 files changed, 63 insertions(+), 53 deletions(-)
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index cca97c961641..53a70a30b674 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -98,9 +98,19 @@ struct IR_IO_APIC_route_entry {
struct irq_alloc_info;
struct irq_data;
-#define IOAPIC_AUTO -1
-#define IOAPIC_EDGE 0
-#define IOAPIC_LEVEL 1
+#define IOAPIC_AUTO -1
+#define IOAPIC_EDGE 0
+#define IOAPIC_LEVEL 1
+
+#define IOAPIC_MASKED 1
+#define IOAPIC_UNMASKED 0
+
+#define IOAPIC_POL_HIGH 0
+#define IOAPIC_POL_LOW 1
+
+#define IOAPIC_DEST_MODE_PHYSICAL 0
+#define IOAPIC_DEST_MODE_LOGICAL 1
+
#define IOAPIC_MAP_ALLOC 0x1
#define IOAPIC_MAP_CHECK 0x2
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 71971b89da59..cf42a6adf9c0 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -356,7 +356,7 @@ static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
static void ioapic_mask_entry(int apic, int pin)
{
unsigned long flags;
- union entry_union eu = { .entry.mask = 1 };
+ union entry_union eu = { .entry.mask = IOAPIC_MASKED };
raw_spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x10 + 2*pin, eu.w1);
@@ -517,7 +517,7 @@ static void __eoi_ioapic_pin(int apic, int pin, int vector)
/*
* Mask the entry and change the trigger mode to edge.
*/
- entry1.mask = 1;
+ entry1.mask = IOAPIC_MASKED;
entry1.trigger = IOAPIC_EDGE;
__ioapic_write_entry(apic, pin, entry1);
@@ -553,8 +553,8 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
* Make sure the entry is masked and re-read the contents to check
* if it is a level triggered pin and if the remote-IRR is set.
*/
- if (!entry.mask) {
- entry.mask = 1;
+ if (entry.mask == IOAPIC_UNMASKED) {
+ entry.mask = IOAPIC_MASKED;
ioapic_write_entry(apic, pin, entry);
entry = ioapic_read_entry(apic, pin);
}
@@ -567,7 +567,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
* doesn't clear the remote-IRR if the trigger mode is not
* set to level.
*/
- if (!entry.trigger) {
+ if (entry.trigger == IOAPIC_EDGE) {
entry.trigger = IOAPIC_LEVEL;
ioapic_write_entry(apic, pin, entry);
}
@@ -670,8 +670,8 @@ void mask_ioapic_entries(void)
struct IO_APIC_route_entry entry;
entry = ioapics[apic].saved_registers[pin];
- if (!entry.mask) {
- entry.mask = 1;
+ if (entry.mask == IOAPIC_UNMASKED) {
+ entry.mask = IOAPIC_MASKED;
ioapic_write_entry(apic, pin, entry);
}
}
@@ -773,11 +773,11 @@ static int EISA_ELCR(unsigned int irq)
#endif
-/* ISA interrupts are always polarity zero edge triggered,
+/* ISA interrupts are always active high edge triggered,
* when listed as conforming in the MP table. */
-#define default_ISA_trigger(idx) (0)
-#define default_ISA_polarity(idx) (0)
+#define default_ISA_trigger(idx) (IOAPIC_EDGE)
+#define default_ISA_polarity(idx) (IOAPIC_POL_HIGH)
/* EISA interrupts are always polarity zero and can be edge or level
* trigger depending on the ELCR value. If an interrupt is listed as
@@ -787,11 +787,11 @@ static int EISA_ELCR(unsigned int irq)
#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq))
#define default_EISA_polarity(idx) default_ISA_polarity(idx)
-/* PCI interrupts are always polarity one level triggered,
+/* PCI interrupts are always active low level triggered,
* when listed as conforming in the MP table. */
-#define default_PCI_trigger(idx) (1)
-#define default_PCI_polarity(idx) (1)
+#define default_PCI_trigger(idx) (IOAPIC_LEVEL)
+#define default_PCI_polarity(idx) (IOAPIC_POL_LOW)
static int irq_polarity(int idx)
{
@@ -811,24 +811,24 @@ static int irq_polarity(int idx)
break;
case 1: /* high active */
{
- polarity = 0;
+ polarity = IOAPIC_POL_HIGH;
break;
}
case 2: /* reserved */
{
pr_warn("broken BIOS!!\n");
- polarity = 1;
+ polarity = IOAPIC_POL_LOW;
break;
}
case 3: /* low active */
{
- polarity = 1;
+ polarity = IOAPIC_POL_LOW;
break;
}
default: /* invalid */
{
pr_warn("broken BIOS!!\n");
- polarity = 1;
+ polarity = IOAPIC_POL_LOW;
break;
}
}
@@ -870,7 +870,7 @@ static int irq_trigger(int idx)
default:
{
pr_warn("broken BIOS!!\n");
- trigger = 1;
+ trigger = IOAPIC_LEVEL;
break;
}
}
@@ -878,24 +878,24 @@ static int irq_trigger(int idx)
break;
case 1: /* edge */
{
- trigger = 0;
+ trigger = IOAPIC_EDGE;
break;
}
case 2: /* reserved */
{
pr_warn("broken BIOS!!\n");
- trigger = 1;
+ trigger = IOAPIC_LEVEL;
break;
}
case 3: /* level */
{
- trigger = 1;
+ trigger = IOAPIC_LEVEL;
break;
}
default: /* invalid */
{
pr_warn("broken BIOS!!\n");
- trigger = 0;
+ trigger = IOAPIC_EDGE;
break;
}
}
@@ -939,11 +939,11 @@ static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst,
dst->ioapic_polarity = polarity;
} else {
/*
- * PCI interrupts are always polarity one level
+ * PCI interrupts are always active low level
* triggered.
*/
- dst->ioapic_trigger = 1;
- dst->ioapic_polarity = 1;
+ dst->ioapic_trigger = IOAPIC_LEVEL;
+ dst->ioapic_polarity = IOAPIC_POL_LOW;
}
}
}
@@ -1296,9 +1296,10 @@ static void io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
entry = ioapic_read_entry(apic, i);
snprintf(buf, sizeof(buf),
" pin%02x, %s, %s, %s, V(%02X), IRR(%1d), S(%1d)",
- i, entry.mask ? "disabled" : "enabled ",
- entry.trigger ? "level" : "edge ",
- entry.polarity ? "low " : "high",
+ i,
+ entry.mask == IOAPIC_MASKED ? "disabled" : "enabled ",
+ entry.trigger == IOAPIC_LEVEL ? "level" : "edge ",
+ entry.polarity == IOAPIC_POL_LOW ? "low " : "high",
entry.vector, entry.irr, entry.delivery_status);
if (ir_entry->format)
printk(KERN_DEBUG "%s, remapped, I(%04X), Z(%X)\n",
@@ -1306,7 +1307,9 @@ static void io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
ir_entry->zero);
else
printk(KERN_DEBUG "%s, %s, D(%02X), M(%1d)\n",
- buf, entry.dest_mode ? "logical " : "physical",
+ buf,
+ entry.dest_mode == IOAPIC_DEST_MODE_LOGICAL ?
+ "logical " : "physical",
entry.dest, entry.delivery_mode);
}
}
@@ -1476,15 +1479,12 @@ void native_disable_io_apic(void)
struct IO_APIC_route_entry entry;
memset(&entry, 0, sizeof(entry));
- entry.mask = 0; /* Enabled */
- entry.trigger = 0; /* Edge */
- entry.irr = 0;
- entry.polarity = 0; /* High */
- entry.delivery_status = 0;
- entry.dest_mode = 0; /* Physical */
- entry.delivery_mode = dest_ExtINT; /* ExtInt */
- entry.vector = 0;
- entry.dest = read_apic_id();
+ entry.mask = IOAPIC_UNMASKED;
+ entry.trigger = IOAPIC_EDGE;
+ entry.polarity = IOAPIC_POL_HIGH;
+ entry.dest_mode = IOAPIC_DEST_MODE_PHYSICAL;
+ entry.delivery_mode = dest_ExtINT;
+ entry.dest = read_apic_id();
/*
* Add it to the IO-APIC irq-routing table:
@@ -1494,7 +1494,6 @@ void native_disable_io_apic(void)
if (cpu_has_apic || apic_from_smp_config())
disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-
}
/*
@@ -2018,12 +2017,12 @@ static inline void __init unlock_ExtINT_logic(void)
memset(&entry1, 0, sizeof(entry1));
- entry1.dest_mode = 0; /* physical delivery */
- entry1.mask = 0; /* unmask IRQ now */
+ entry1.dest_mode = IOAPIC_DEST_MODE_PHYSICAL;
+ entry1.mask = IOAPIC_UNMASKED;
entry1.dest = hard_smp_processor_id();
entry1.delivery_mode = dest_ExtINT;
entry1.polarity = entry0.polarity;
- entry1.trigger = 0;
+ entry1.trigger = IOAPIC_EDGE;
entry1.vector = 0;
ioapic_write_entry(apic, pin, entry1);
@@ -2911,9 +2910,9 @@ static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data,
data->polarity = info->ioapic_polarity;
} else if (acpi_get_override_irq(gsi, &data->trigger,
&data->polarity) < 0) {
- /* PCI interrupts are always polarity one level triggered. */
- data->trigger = 1;
- data->polarity = 1;
+ /* PCI interrupts are always active low level triggered. */
+ data->trigger = IOAPIC_LEVEL;
+ data->polarity = IOAPIC_POL_LOW;
}
}
@@ -2925,15 +2924,16 @@ static void mp_setup_entry(struct irq_cfg *cfg, struct mp_chip_data *data,
entry->dest_mode = apic->irq_dest_mode;
entry->dest = cfg->dest_apicid;
entry->vector = cfg->vector;
- entry->mask = 0; /* enable IRQ */
entry->trigger = data->trigger;
entry->polarity = data->polarity;
/*
- * Mask level triggered irqs.
- * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+ * Mask level triggered irqs. Edge triggered irqs are masked
+ * by the irq core code in case they fire.
*/
- if (data->trigger)
- entry->mask = 1;
+ if (data->trigger == IOAPIC_LEVEL)
+ entry->mask = IOAPIC_MASKED;
+ else
+ entry->mask = IOAPIC_UNMASKED;
}
int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
