Re: d63e2e1f3df breaks sparc/T5-8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> 
> Index: linux-2.6/arch/alpha/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/alpha/Kconfig
> +++ linux-2.6/arch/alpha/Kconfig
> @@ -66,6 +66,9 @@ config ZONE_DMA
>  config ARCH_DMA_ADDR_T_64BIT
>  	def_bool y
>  
> +config ARCH_PCI_BUS_ADDR_T_64BIT
> +	def_bool y
> +
For alpha you define a new symbol with a default value.

>  config NEED_DMA_MAP_STATE
>         def_bool y
>  
> Index: linux-2.6/arch/arm/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/arm/Kconfig
> +++ linux-2.6/arch/arm/Kconfig
> @@ -1779,6 +1779,7 @@ config XEN
>  	depends on !GENERIC_ATOMIC64
>  	depends on MMU
>  	select ARCH_DMA_ADDR_T_64BIT
> +	select ARCH_PCI_BUS_ADDR_T_64BIT
>  	select ARM_PSCI
>  	select SWIOTLB_XEN
>  	help
For arm you use select ...

As the actual definition of the Kconfig symbol is already
present in mm/Kconfig please use select in all cases.

> Index: linux-2.6/arch/arm/mm/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/arm/mm/Kconfig
> +++ linux-2.6/arch/arm/mm/Kconfig
> @@ -630,6 +630,9 @@ config ARCH_PHYS_ADDR_T_64BIT
>  config ARCH_DMA_ADDR_T_64BIT
>  	bool
>  
> +config ARCH_PCI_BUS_ADDR_T_64BIT
> +	bool
> +
Here it would have been nice with a comment that explains the use of ths symbol.

>  config ARM_THUMB
>  	bool "Support Thumb user binaries" if !CPU_THUMBONLY
>  	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || \
> Index: linux-2.6/arch/arm64/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/arm64/Kconfig
> +++ linux-2.6/arch/arm64/Kconfig
> @@ -125,6 +125,9 @@ config HAVE_GENERIC_RCU_GUP
>  config ARCH_DMA_ADDR_T_64BIT
>  	def_bool y
>  
> +config ARCH_PCI_BUS_ADDR_T_64BIT
> +	def_bool y
> +
Use select

>  config NEED_DMA_MAP_STATE
>  	def_bool y
>  
> Index: linux-2.6/arch/ia64/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/ia64/Kconfig
> +++ linux-2.6/arch/ia64/Kconfig
> @@ -74,6 +74,9 @@ config MMU
>  config ARCH_DMA_ADDR_T_64BIT
>  	def_bool y
>  
> +config ARCH_PCI_BUS_ADDR_T_64BIT
> +	def_bool y
> +
Use select

>  config NEED_DMA_MAP_STATE
>  	def_bool y
>  
> Index: linux-2.6/arch/mips/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/mips/Kconfig
> +++ linux-2.6/arch/mips/Kconfig
> @@ -984,6 +984,9 @@ config FW_CFE
>  config ARCH_DMA_ADDR_T_64BIT
>  	def_bool (HIGHMEM && ARCH_PHYS_ADDR_T_64BIT) || 64BIT
>  
> +config ARCH_PCI_BUS_ADDR_T_64BIT
> +	def_bool (HIGHMEM && ARCH_PHYS_ADDR_T_64BIT) || 64BIT

Use select ... if

> ===================================================================
> --- linux-2.6.orig/arch/powerpc/Kconfig
> +++ linux-2.6/arch/powerpc/Kconfig
> @@ -23,6 +23,9 @@ config ARCH_PHYS_ADDR_T_64BIT
>  config ARCH_DMA_ADDR_T_64BIT
>  	def_bool ARCH_PHYS_ADDR_T_64BIT
>  
> +config ARCH_PCI_ADDR_T_64BIT
> +	def_bool ARCH_PHYS_ADDR_T_64BIT
> +
Use select

> Index: linux-2.6/arch/sparc/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/sparc/Kconfig
> +++ linux-2.6/arch/sparc/Kconfig
> @@ -143,6 +143,9 @@ config GENERIC_ISA_DMA
>  	bool
>  	default y if SPARC32
>  
> +config ARCH_PCI_BUS_ADDR_T_64BIT
> +	def_bool y if SPARC64
> +
Use select ...

>  config ARCH_SUPPORTS_DEBUG_PAGEALLOC
>  	def_bool y if SPARC64
>  
> Index: linux-2.6/arch/tile/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/tile/Kconfig
> +++ linux-2.6/arch/tile/Kconfig
> @@ -86,6 +86,9 @@ config ARCH_PHYS_ADDR_T_64BIT
>  config ARCH_DMA_ADDR_T_64BIT
>  	def_bool y
>  
> +config ARCH_PCI_BUS_ADDR_T_64BIT
> +	def_bool y
> +
Use select ...

> Index: linux-2.6/arch/x86/Kconfig
> ===================================================================
> --- linux-2.6.orig/arch/x86/Kconfig
> +++ linux-2.6/arch/x86/Kconfig
> @@ -1295,6 +1295,10 @@ config ARCH_DMA_ADDR_T_64BIT
>  	def_bool y
>  	depends on X86_64 || HIGHMEM64G
>  
> +config ARCH_PCI_BUS_ADDR_T_64BIT
> +	def_bool y
> +	depends on X86_64 || HIGHMEM64G
Use select ...

> +
>  config X86_DIRECT_GBPAGES
>  	def_bool y
>  	depends on X86_64 && !DEBUG_PAGEALLOC && !KMEMCHECK

> Index: linux-2.6/include/linux/types.h
> ===================================================================
> --- linux-2.6.orig/include/linux/types.h
> +++ linux-2.6/include/linux/types.h
> @@ -146,6 +146,13 @@ typedef u64 dma_addr_t;
>  typedef u32 dma_addr_t;
>  #endif /* dma_addr_t */
>  
> +/* A pci_bus_addr_t can hold pci bus address for the platform */
> +#ifdef CONFIG_ARCH_PCI_BUS_ADDR_T_64BIT
> +typedef u64 pci_bus_addr_t;
> +#else
> +typedef u32 pci_bus_addr_t;
> +#endif /* pci_bus_addr_t */
> +
Looking att all the Kconfig logic I get the impression that
the type of pci_bus_addr_t equals unsigned long.
If this is correct then you can skip that and things
gets much simpler.

	Sam
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux