[PATCH V16 16/20] powerpc/powernv: Shift VF resource with an offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On PowerNV platform, resource position in M64 BAR implies the PE# the
resource belongs to. In some cases, adjustment of a resource is necessary
to locate it to a correct position in M64 BAR .

This patch adds pnv_pci_vf_resource_shift() to shift the 'real' PF IOV BAR
address according to an offset.

Note:

    After doing so, there would be a "hole" in the /proc/iomem when offset
    is a positive value. It looks like the device return some mmio back to
    the system, which actually no one could use it.

[bhelgaas: rework loops, rework overlap check, index resource[]
conventionally, remove pci_regs.h include, squashed with next patch]
Signed-off-by: Wei Yang <weiyang@xxxxxxxxxxxxxxxxxx>
---
 arch/powerpc/include/asm/pci-bridge.h     |    4 +
 arch/powerpc/kernel/pci_dn.c              |   13 +
 arch/powerpc/platforms/powernv/pci-ioda.c |  528 ++++++++++++++++++++++++++++-
 arch/powerpc/platforms/powernv/pci.c      |   18 +
 arch/powerpc/platforms/powernv/pci.h      |    7 +
 5 files changed, 553 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 7b8ebc5..8716db4 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -180,6 +180,10 @@ struct pci_dn {
 	int	pe_number;
 #ifdef CONFIG_PCI_IOV
 	u16     vfs_expanded;		/* number of VFs IOV BAR expanded */
+	u16     num_vfs;		/* number of VFs enabled*/
+	int     offset;			/* PE# for the first VF PE */
+#define IODA_INVALID_M64        (-1)
+	int     m64_wins[PCI_SRIOV_NUM_BARS];
 #endif /* CONFIG_PCI_IOV */
 #endif
 	struct list_head child_list;
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index e5f1d78..b3b4df9 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -217,6 +217,19 @@ void remove_dev_pci_data(struct pci_dev *pdev)
 	struct pci_dn *pdn, *tmp;
 	int i;
 
+	/*
+	 * VF and VF PE are created/released dynamically, so we need to
+	 * bind/unbind them.  Otherwise the VF and VF PE would be mismatched
+	 * when re-enabling SR-IOV.
+	 */
+	if (pdev->is_virtfn) {
+		pdn = pci_get_pdn(pdev);
+#ifdef CONFIG_PPC_POWERNV
+		pdn->pe_number = IODA_INVALID_PE;
+#endif
+		return;
+	}
+
 	/* Only support IOV PF for now */
 	if (!pdev->is_physfn)
 		return;
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 217eaad..5187d16 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -44,6 +44,9 @@
 #include "powernv.h"
 #include "pci.h"
 
+/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
+#define TCE32_TABLE_SIZE	((0x10000000 / 0x1000) * 8)
+
 static void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 			    const char *fmt, ...)
 {
@@ -56,11 +59,18 @@ static void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 	vaf.fmt = fmt;
 	vaf.va = &args;
 
-	if (pe->pdev)
+	if (pe->flags & PNV_IODA_PE_DEV)
 		strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
-	else
+	else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
 		sprintf(pfix, "%04x:%02x     ",
 			pci_domain_nr(pe->pbus), pe->pbus->number);
+#ifdef CONFIG_PCI_IOV
+	else if (pe->flags & PNV_IODA_PE_VF)
+		sprintf(pfix, "%04x:%02x:%2x.%d",
+			pci_domain_nr(pe->parent_dev->bus),
+			(pe->rid & 0xff00) >> 8,
+			PCI_SLOT(pe->rid), PCI_FUNC(pe->rid));
+#endif /* CONFIG_PCI_IOV*/
 
 	printk("%spci %s: [PE# %.3d] %pV",
 	       level, pfix, pe->pe_number, &vaf);
@@ -591,7 +601,7 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
 			      bool is_add)
 {
 	struct pnv_ioda_pe *slave;
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = NULL;
 	int ret;
 
 	/*
@@ -630,8 +640,12 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
 
 	if (pe->flags & (PNV_IODA_PE_BUS_ALL | PNV_IODA_PE_BUS))
 		pdev = pe->pbus->self;
-	else
+	else if (pe->flags & PNV_IODA_PE_DEV)
 		pdev = pe->pdev->bus->self;
+#ifdef CONFIG_PCI_IOV
+	else if (pe->flags & PNV_IODA_PE_VF)
+		pdev = pe->parent_dev->bus->self;
+#endif /* CONFIG_PCI_IOV */
 	while (pdev) {
 		struct pci_dn *pdn = pci_get_pdn(pdev);
 		struct pnv_ioda_pe *parent;
@@ -649,6 +663,87 @@ static int pnv_ioda_set_peltv(struct pnv_phb *phb,
 	return 0;
 }
 
+#ifdef CONFIG_PCI_IOV
+static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
+{
+	struct pci_dev *parent;
+	uint8_t bcomp, dcomp, fcomp;
+	int64_t rc;
+	long rid_end, rid;
+
+	/* Currently, we just deconfigure VF PE. Bus PE will always there.*/
+	if (pe->pbus) {
+		int count;
+
+		dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+		parent = pe->pbus->self;
+		if (pe->flags & PNV_IODA_PE_BUS_ALL)
+			count = pe->pbus->busn_res.end - pe->pbus->busn_res.start + 1;
+		else
+			count = 1;
+
+		switch(count) {
+		case  1: bcomp = OpalPciBusAll;         break;
+		case  2: bcomp = OpalPciBus7Bits;       break;
+		case  4: bcomp = OpalPciBus6Bits;       break;
+		case  8: bcomp = OpalPciBus5Bits;       break;
+		case 16: bcomp = OpalPciBus4Bits;       break;
+		case 32: bcomp = OpalPciBus3Bits;       break;
+		default:
+			dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n",
+			        count);
+			/* Do an exact match only */
+			bcomp = OpalPciBusAll;
+		}
+		rid_end = pe->rid + (count << 8);
+	} else {
+		if (pe->flags & PNV_IODA_PE_VF)
+			parent = pe->parent_dev;
+		else
+			parent = pe->pdev->bus->self;
+		bcomp = OpalPciBusAll;
+		dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+		fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+		rid_end = pe->rid + 1;
+	}
+
+	/* Clear the reverse map */
+	for (rid = pe->rid; rid < rid_end; rid++)
+		phb->ioda.pe_rmap[rid] = 0;
+
+	/* Release from all parents PELT-V */
+	while (parent) {
+		struct pci_dn *pdn = pci_get_pdn(parent);
+		if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+			rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+						pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+			/* XXX What to do in case of error ? */
+		}
+		parent = parent->bus->self;
+	}
+
+	opal_pci_eeh_freeze_set(phb->opal_id, pe->pe_number,
+				  OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+	/* Disassociate PE in PELT */
+	rc = opal_pci_set_peltv(phb->opal_id, pe->pe_number,
+				pe->pe_number, OPAL_REMOVE_PE_FROM_DOMAIN);
+	if (rc)
+		pe_warn(pe, "OPAL error %ld remove self from PELTV\n", rc);
+	rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+			     bcomp, dcomp, fcomp, OPAL_UNMAP_PE);
+	if (rc)
+		pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
+
+	pe->pbus = NULL;
+	pe->pdev = NULL;
+	pe->parent_dev = NULL;
+
+	return 0;
+}
+#endif /* CONFIG_PCI_IOV */
+
 static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 {
 	struct pci_dev *parent;
@@ -675,15 +770,19 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 		case 16: bcomp = OpalPciBus4Bits;	break;
 		case 32: bcomp = OpalPciBus3Bits;	break;
 		default:
-			pr_err("%s: Number of subordinate busses %d"
-			       " unsupported\n",
-			       pci_name(pe->pbus->self), count);
+			dev_err(&pe->pbus->dev, "Number of subordinate buses %d unsupported\n",
+			        count);
 			/* Do an exact match only */
 			bcomp = OpalPciBusAll;
 		}
 		rid_end = pe->rid + (count << 8);
 	} else {
-		parent = pe->pdev->bus->self;
+#ifdef CONFIG_PCI_IOV
+		if (pe->flags & PNV_IODA_PE_VF)
+			parent = pe->parent_dev;
+		else
+#endif /* CONFIG_PCI_IOV */
+			parent = pe->pdev->bus->self;
 		bcomp = OpalPciBusAll;
 		dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
 		fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
@@ -774,6 +873,78 @@ static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
 	return 10;
 }
 
+#ifdef CONFIG_PCI_IOV
+static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
+{
+	struct pci_dn *pdn = pci_get_pdn(dev);
+	int i;
+	struct resource *res, res2;
+	resource_size_t size;
+	u16 num_vfs;
+
+	if (!dev->is_physfn)
+		return -EINVAL;
+
+	/*
+	 * "offset" is in VFs.  The M64 windows are sized so that when they
+	 * are segmented, each segment is the same size as the IOV BAR.
+	 * Each segment is in a separate PE, and the high order bits of the
+	 * address are the PE number.  Therefore, each VF's BAR is in a
+	 * separate PE, and changing the IOV BAR start address changes the
+	 * range of PEs the VFs are in.
+	 */
+	num_vfs = pdn->num_vfs;
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &dev->resource[i + PCI_IOV_RESOURCES];
+		if (!res->flags || !res->parent)
+			continue;
+
+		if (!pnv_pci_is_mem_pref_64(res->flags))
+			continue;
+
+		/*
+		 * The actual IOV BAR range is determined by the start address
+		 * and the actual size for num_vfs VFs BAR.  This check is to
+		 * make sure that after shifting, the range will not overlap
+		 * with another device.
+		 */
+		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
+		res2.flags = res->flags;
+		res2.start = res->start + (size * offset);
+		res2.end = res2.start + (size * num_vfs) - 1;
+
+		if (res2.end > res->end) {
+			dev_err(&dev->dev, "VF BAR%d: %pR would extend past %pR (trying to enable %d VFs shifted by %d)\n",
+				i, &res2, res, num_vfs, offset);
+			return -EBUSY;
+		}
+	}
+
+	/*
+	 * After doing so, there would be a "hole" in the /proc/iomem when
+	 * offset is a positive value. It looks like the device return some
+	 * mmio back to the system, which actually no one could use it.
+	 */
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &dev->resource[i + PCI_IOV_RESOURCES];
+		if (!res->flags || !res->parent)
+			continue;
+
+		if (!pnv_pci_is_mem_pref_64(res->flags))
+			continue;
+
+		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
+		res2 = *res;
+		res->start += size * offset;
+
+		dev_info(&dev->dev, "VF BAR%d: %pR shifted to %pR (enabling %d VFs shifted by %d)\n",
+			 i, &res2, res, num_vfs, offset);
+		pci_update_resource(dev, i + PCI_IOV_RESOURCES);
+	}
+	return 0;
+}
+#endif /* CONFIG_PCI_IOV */
+
 #if 0
 static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 {
@@ -979,8 +1150,316 @@ static void pnv_pci_ioda_setup_PEs(void)
 }
 
 #ifdef CONFIG_PCI_IOV
+static int pnv_pci_vf_release_m64(struct pci_dev *pdev)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pci_dn         *pdn;
+	int                    i;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		if (pdn->m64_wins[i] == IODA_INVALID_M64)
+			continue;
+		opal_pci_phb_mmio_enable(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i], 0);
+		clear_bit(pdn->m64_wins[i], &phb->ioda.m64_bar_alloc);
+		pdn->m64_wins[i] = IODA_INVALID_M64;
+	}
+
+	return 0;
+}
+
+static int pnv_pci_vf_assign_m64(struct pci_dev *pdev)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pci_dn         *pdn;
+	unsigned int           win;
+	struct resource       *res;
+	int                    i;
+	int64_t                rc;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+
+	/* Initialize the m64_wins to IODA_INVALID_M64 */
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
+		pdn->m64_wins[i] = IODA_INVALID_M64;
+
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &pdev->resource[i + PCI_IOV_RESOURCES];
+		if (!res->flags || !res->parent)
+			continue;
+
+		if (!pnv_pci_is_mem_pref_64(res->flags))
+			continue;
+
+		do {
+			win = find_next_zero_bit(&phb->ioda.m64_bar_alloc,
+					phb->ioda.m64_bar_idx + 1, 0);
+
+			if (win >= phb->ioda.m64_bar_idx + 1)
+				goto m64_failed;
+		} while (test_and_set_bit(win, &phb->ioda.m64_bar_alloc));
+
+		pdn->m64_wins[i] = win;
+
+		/* Map the M64 here */
+		rc = opal_pci_set_phb_mem_window(phb->opal_id,
+						 OPAL_M64_WINDOW_TYPE,
+						 pdn->m64_wins[i],
+						 res->start,
+						 0, /* unused */
+						 resource_size(res));
+		if (rc != OPAL_SUCCESS) {
+			dev_err(&pdev->dev, "Failed to map M64 window #%d: %lld\n",
+				win, rc);
+			goto m64_failed;
+		}
+
+		rc = opal_pci_phb_mmio_enable(phb->opal_id,
+				OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i], 1);
+		if (rc != OPAL_SUCCESS) {
+			dev_err(&pdev->dev, "Failed to enable M64 window #%d: %llx\n",
+				win, rc);
+			goto m64_failed;
+		}
+	}
+	return 0;
+
+m64_failed:
+	pnv_pci_vf_release_m64(pdev);
+	return -EBUSY;
+}
+
+static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev, struct pnv_ioda_pe *pe)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct iommu_table    *tbl;
+	unsigned long         addr;
+	int64_t               rc;
+
+	bus = dev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	tbl = pe->tce32_table;
+	addr = tbl->it_base;
+
+	opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number,
+				   pe->pe_number << 1, 1, __pa(addr),
+				   0, 0x1000);
+
+	rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
+				        pe->pe_number,
+				        (pe->pe_number << 1) + 1,
+				        pe->tce_bypass_base,
+				        0);
+	if (rc)
+		pe_warn(pe, "OPAL error %ld release DMA window\n", rc);
+
+	iommu_free_table(tbl, of_node_full_name(dev->dev.of_node));
+	free_pages(addr, get_order(TCE32_TABLE_SIZE));
+	pe->tce32_table = NULL;
+}
+
+static void pnv_ioda_release_vf_PE(struct pci_dev *pdev)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pnv_ioda_pe    *pe, *pe_n;
+	struct pci_dn         *pdn;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+
+	if (!pdev->is_physfn)
+		return;
+
+	pdn = pci_get_pdn(pdev);
+	list_for_each_entry_safe(pe, pe_n, &phb->ioda.pe_list, list) {
+		if (pe->parent_dev != pdev)
+			continue;
+
+		pnv_pci_ioda2_release_dma_pe(pdev, pe);
+
+		/* Remove from list */
+		mutex_lock(&phb->ioda.pe_list_mutex);
+		list_del(&pe->list);
+		mutex_unlock(&phb->ioda.pe_list_mutex);
+
+		pnv_ioda_deconfigure_pe(phb, pe);
+
+		pnv_ioda_free_pe(phb, pe->pe_number);
+	}
+}
+
+void pnv_pci_sriov_disable(struct pci_dev *pdev)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pci_dn         *pdn;
+	struct pci_sriov      *iov;
+	u16 num_vfs;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+	iov = pdev->sriov;
+	num_vfs = pdn->num_vfs;
+
+	/* Release VF PEs */
+	pnv_ioda_release_vf_PE(pdev);
+
+	if (phb->type == PNV_PHB_IODA2) {
+		pnv_pci_vf_resource_shift(pdev, -pdn->offset);
+
+		/* Release M64 windows */
+		pnv_pci_vf_release_m64(pdev);
+
+		/* Release PE numbers */
+		bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
+		pdn->offset = 0;
+	}
+}
+
+static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
+				       struct pnv_ioda_pe *pe);
+static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pnv_ioda_pe    *pe;
+	int                    pe_num;
+	u16                    vf_index;
+	struct pci_dn         *pdn;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+
+	if (!pdev->is_physfn)
+		return;
+
+	/* Reserve PE for each VF */
+	for (vf_index = 0; vf_index < num_vfs; vf_index++) {
+		pe_num = pdn->offset + vf_index;
+
+		pe = &phb->ioda.pe_array[pe_num];
+		pe->pe_number = pe_num;
+		pe->phb = phb;
+		pe->flags = PNV_IODA_PE_VF;
+		pe->pbus = NULL;
+		pe->parent_dev = pdev;
+		pe->tce32_seg = -1;
+		pe->mve_number = -1;
+		pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
+			   pci_iov_virtfn_devfn(pdev, vf_index);
+
+		pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%d\n",
+			hose->global_number, pdev->bus->number,
+			PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)),
+			PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)), pe_num);
+
+		if (pnv_ioda_configure_pe(phb, pe)) {
+			/* XXX What do we do here ? */
+			if (pe_num)
+				pnv_ioda_free_pe(phb, pe_num);
+			pe->pdev = NULL;
+			continue;
+		}
+
+		pe->tce32_table = kzalloc_node(sizeof(struct iommu_table),
+				GFP_KERNEL, hose->node);
+		pe->tce32_table->data = pe;
+
+		/* Put PE to the list */
+		mutex_lock(&phb->ioda.pe_list_mutex);
+		list_add_tail(&pe->list, &phb->ioda.pe_list);
+		mutex_unlock(&phb->ioda.pe_list_mutex);
+
+		pnv_pci_ioda2_setup_dma_pe(phb, pe);
+	}
+}
+
+int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
+{
+	struct pci_bus        *bus;
+	struct pci_controller *hose;
+	struct pnv_phb        *phb;
+	struct pci_dn         *pdn;
+	int                    ret;
+
+	bus = pdev->bus;
+	hose = pci_bus_to_host(bus);
+	phb = hose->private_data;
+	pdn = pci_get_pdn(pdev);
+
+	if (phb->type == PNV_PHB_IODA2) {
+		/* Calculate available PE for required VFs */
+		mutex_lock(&phb->ioda.pe_alloc_mutex);
+		pdn->offset = bitmap_find_next_zero_area(
+			phb->ioda.pe_alloc, phb->ioda.total_pe,
+			0, num_vfs, 0);
+		if (pdn->offset >= phb->ioda.total_pe) {
+			mutex_unlock(&phb->ioda.pe_alloc_mutex);
+			dev_info(&pdev->dev, "Failed to enable VF%d\n", num_vfs);
+			pdn->offset = 0;
+			return -EBUSY;
+		}
+		bitmap_set(phb->ioda.pe_alloc, pdn->offset, num_vfs);
+		pdn->num_vfs = num_vfs;
+		mutex_unlock(&phb->ioda.pe_alloc_mutex);
+
+		/* Assign M64 window accordingly */
+		ret = pnv_pci_vf_assign_m64(pdev);
+		if (ret) {
+			dev_info(&pdev->dev, "Not enough M64 window resources\n");
+			goto m64_failed;
+		}
+
+		/*
+		 * When using one M64 BAR to map one IOV BAR, we need to shift
+		 * the IOV BAR according to the PE# allocated to the VFs.
+		 * Otherwise, the PE# for the VF will conflict with others.
+		 */
+		ret = pnv_pci_vf_resource_shift(pdev, pdn->offset);
+		if (ret)
+			goto m64_failed;
+	}
+
+	/* Setup VF PEs */
+	pnv_ioda_setup_vf_PE(pdev, num_vfs);
+
+	return 0;
+
+m64_failed:
+	bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
+	pdn->offset = 0;
+
+	return ret;
+}
+
 int pcibios_sriov_disable(struct pci_dev *pdev)
 {
+	pnv_pci_sriov_disable(pdev);
+
 	/* Release PCI data */
 	remove_dev_pci_data(pdev);
 	return 0;
@@ -990,6 +1469,8 @@ int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 {
 	/* Allocate PCI data */
 	add_dev_pci_data(pdev);
+
+	pnv_pci_sriov_enable(pdev, num_vfs);
 	return 0;
 }
 #endif /* CONFIG_PCI_IOV */
@@ -1186,9 +1667,6 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 	int64_t rc;
 	void *addr;
 
-	/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
-#define TCE32_TABLE_SIZE	((0x10000000 / 0x1000) * 8)
-
 	/* XXX FIXME: Handle 64-bit only DMA devices */
 	/* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
 	/* XXX FIXME: Allocate multi-level tables on PHB3 */
@@ -1251,12 +1729,19 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
 				 TCE_PCI_SWINV_PAIR);
 	}
 	iommu_init_table(tbl, phb->hose->node);
-	iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
 
-	if (pe->pdev)
+	if (pe->flags & PNV_IODA_PE_DEV) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
 		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
-	else
+	} else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
 		pnv_ioda_setup_bus_dma(pe, pe->pbus, true);
+	} else if (pe->flags & PNV_IODA_PE_VF) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
+	}
 
 	return;
  fail:
@@ -1383,12 +1868,19 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 		tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
 	}
 	iommu_init_table(tbl, phb->hose->node);
-	iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
 
-	if (pe->pdev)
+	if (pe->flags & PNV_IODA_PE_DEV) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
 		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
-	else
+	} else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
 		pnv_ioda_setup_bus_dma(pe, pe->pbus, true);
+	} else if (pe->flags & PNV_IODA_PE_VF) {
+		iommu_register_group(tbl, phb->hose->global_number,
+				     pe->pe_number);
+	}
 
 	/* Also create a bypass window */
 	if (!pnv_iommu_bypass_disabled)
@@ -2068,6 +2560,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	phb->hub_id = hub_id;
 	phb->opal_id = phb_id;
 	phb->type = ioda_type;
+	mutex_init(&phb->ioda.pe_alloc_mutex);
 
 	/* Detect specific models for error handling */
 	if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
@@ -2127,6 +2620,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 
 	INIT_LIST_HEAD(&phb->ioda.pe_dma_list);
 	INIT_LIST_HEAD(&phb->ioda.pe_list);
+	mutex_init(&phb->ioda.pe_list_mutex);
 
 	/* Calculate how many 32-bit TCE segments we have */
 	phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 946aa3d..02badce 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -714,6 +714,24 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 {
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	struct pnv_phb *phb = hose->private_data;
+#ifdef CONFIG_PCI_IOV
+	struct pnv_ioda_pe *pe;
+	struct pci_dn *pdn;
+
+	/* Fix the VF pdn PE number */
+	if (pdev->is_virtfn) {
+		pdn = pci_get_pdn(pdev);
+		WARN_ON(pdn->pe_number != IODA_INVALID_PE);
+		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+			if (pe->rid == ((pdev->bus->number << 8) |
+			    (pdev->devfn & 0xff))) {
+				pdn->pe_number = pe->pe_number;
+				pe->pdev = pdev;
+				break;
+			}
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
 
 	/* If we have no phb structure, try to setup a fallback based on
 	 * the device-tree (RTAS PCI for example)
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8428047..070ee88 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -23,6 +23,7 @@ enum pnv_phb_model {
 #define PNV_IODA_PE_BUS_ALL	(1 << 2)	/* PE has subordinate buses	*/
 #define PNV_IODA_PE_MASTER	(1 << 3)	/* Master PE in compound case	*/
 #define PNV_IODA_PE_SLAVE	(1 << 4)	/* Slave PE in compound case	*/
+#define PNV_IODA_PE_VF		(1 << 5)	/* PE for one VF 		*/
 
 /* Data associated with a PE, including IOMMU tracking etc.. */
 struct pnv_phb;
@@ -34,6 +35,9 @@ struct pnv_ioda_pe {
 	 * entire bus (& children). In the former case, pdev
 	 * is populated, in the later case, pbus is.
 	 */
+#ifdef CONFIG_PCI_IOV
+	struct pci_dev          *parent_dev;
+#endif
 	struct pci_dev		*pdev;
 	struct pci_bus		*pbus;
 
@@ -145,6 +149,8 @@ struct pnv_phb {
 
 			/* PE allocation bitmap */
 			unsigned long		*pe_alloc;
+			/* PE allocation mutex */
+			struct mutex		pe_alloc_mutex;
 
 			/* M32 & IO segment maps */
 			unsigned int		*m32_segmap;
@@ -159,6 +165,7 @@ struct pnv_phb {
 			 * on the sequence of creation
 			 */
 			struct list_head	pe_list;
+			struct mutex            pe_list_mutex;
 
 			/* Reverse map of PEs, will have to extend if
 			 * we are to support more than 256 PEs, indexed
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux