Re: [PATCH v3 03/10] pci: drop some duplicate code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 24, 2015 at 04:42:35PM +0100, Michael S. Tsirkin wrote:
> pci_msi_init_pci_dev and pci_msi_off share a lot of code.
> This used to be justified since pci_msi_init_pci_dev
> wasn't compiled in when CONFIG_PCI_MSI is off.
> Now that it is, let's reuse code.
> 
> Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
> ---
>  drivers/pci/pci.c   | 24 +++++-------------------
>  drivers/pci/probe.c | 11 ++++-------
>  2 files changed, 9 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 81f06e8..d5f297a 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3106,26 +3106,12 @@ EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx);
>   */
>  void pci_msi_off(struct pci_dev *dev)
>  {
> -	int pos;
> -	u16 control;
> +	if (dev->msi_cap)
> +		pci_msi_set_enable(dev, 0);
>  
> -	/*
> -	 * This looks like it could go in msi.c, but we need it even when
> -	 * CONFIG_PCI_MSI=n.  For the same reason, we can't use
> -	 * dev->msi_cap or dev->msix_cap here.
> -	 */
> -	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
> -	if (pos) {
> -		pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
> -		control &= ~PCI_MSI_FLAGS_ENABLE;
> -		pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
> -	}
> -	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> -	if (pos) {
> -		pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
> -		control &= ~PCI_MSIX_FLAGS_ENABLE;
> -		pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
> -	}
> +	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);

I think the above line is superfluous, isn't it?  You already do the same
in pci_msi_init_pci_dev() (below).

> +	if (dev->msix_cap)
> +		pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>  }
>  EXPORT_SYMBOL_GPL(pci_msi_off);
>  
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 45d6d5c..baf8ddd 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1489,17 +1489,14 @@ static void pci_msi_init_pci_dev(struct pci_dev *dev)
>  	INIT_LIST_HEAD(&dev->msi_list);
>  #endif
>  
> +	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
> +	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> +
>  	/* Disable the msi hardware to avoid screaming interrupts
>  	 * during boot.  This is the power on reset default so
>  	 * usually this should be a noop.
>  	 */
> -	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
> -	if (dev->msi_cap)
> -		pci_msi_set_enable(dev, 0);
> -
> -	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> -	if (dev->msix_cap)
> -		pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> +	pci_msi_off(dev);
>  }
>  
>  static void pci_init_capabilities(struct pci_dev *dev)
> -- 
> MST
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux