On 2015/3/21 8:47, Rafael J. Wysocki wrote: > On Friday, March 20, 2015 06:34:00 PM Bernhard Thaler wrote: >> This is a multi-part message in MIME format. >> --------------000805070501000906050700 >> Content-Type: text/plain; charset=windows-1252 >> Content-Transfer-Encoding: 7bit >> >> >> On 19.03.2015 12:27, Rafael J. Wysocki wrote: >>> On Thursday, March 19, 2015 08:10:44 AM Bernhard Thaler wrote: >>>> This is a multi-part message in MIME format. >>>> --------------000809080900050004000900 >>>> Content-Type: text/plain; charset=windows-1252 >>>> Content-Transfer-Encoding: 7bit >>>> >>>> Hi, >>>> >>>> I think this regression is not yet solved. >>> >>> First off, it is good to CC the commit author too (CCed now). >>> >>>> I encounter this or a similar problem with an PC Engines APU.1C device >>>> (see: http://pcengines.ch/apu.htm). It has 3 network interfaces each >>>> requiring the r8169 kernel module. >>>> >>>> With 4.0.0-rc4 I get this error message at boot (for each of the 3 devices): >>>> >>>> [ 3.562301] r8169 0000:01:00.0 (unnamed net_device) (uninitialized): >>>> rtl_chipcmd_cond == 1 (loop: 100, delay: 100). >>>> >>>> "ifconfig -a" shows ff:ff:ff:ff:ff:ff as MAC address for each of the >>>> interfaces (see eth0 as example): >>>> >>>> eth0 Link encap:Ethernet HWaddr ff:ff:ff:ff:ff:ff >>>> BROADCAST PROMISC MULTICAST MTU:1500 Metric:1 >>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 txqueuelen:1000 >>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>> >>>> The network interfaces cannot be brought up/used. >>>> >>>> The same device and setup did work with a previously used 3.18.0-rc5 >>>> kernel. When I boot it with this 3.18.0-rc5 kernel everything i OK, >>>> interfaces come up and work. >>> >>> Second, it is not entirely clear to me that what you're seeing is actually >>> the same regression. Have you tested 4.0.0-rc4 with commit 593669c2ac0f >>> reverted? >>> >> You are right, I was a bit quick about this conclusion. I based it on >> Thomas Voegtle >> bisect in http://www.spinics.net/lists/linux-pci/msg39014.html and my own >> observation of the same problem situation with 4.0.0-rc4. >> >> Test Results: >> >> * Everything works fine before 593669c2ac0f, network interfaces are >> available >> and usable e.g. with 812dbd9. >> >> * The problem starts for me with 593669c2ac0f as, errors at boot, network >> interfaces unusable as stated above. > > And it doesn't go away in 4.0-rc4 which indicates that the fixes applied > so far do not work for you. > > Gerry, can you please help here? Hi Bernhard, Thanks for providing acpi data. I have figured out the cause of the regression. Your platform defines PCI host bridge MMIO resources as: Name (CRES, ResourceTemplate () { IO (Decode16, 0x0CF8, // Range Minimum 0x0CF8, // Range Maximum 0x01, // Alignment 0x08, // Length ) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x0000, // Range Minimum 0x0CF7, // Range Maximum 0x0000, // Translation Offset 0x0CF8, // Length ,, , TypeStatic) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x0D00, // Range Minimum 0xFFFF, // Range Maximum 0x0000, // Translation Offset 0xF300, // Length ,, , TypeStatic) Memory32Fixed (ReadOnly, 0x000A0000, // Address Base 0x00020000, // Address Length ) Memory32Fixed (ReadOnly, 0x00000000, // Address Base 0x00000000, // Address Length _Y00) }) With commit (x86/PCI/ACPI: Ignore resources consumed by host bridge itself), all resources without PRODUCER flag will be ignored, so MMIO defined by Memory32Fixed operator gets ignored. The fix is only to ignore IO resources without PRODUCER flag and keeps all MMIO resources no matter PRODUCER is set or not. Could you please help to try following patch? Regards! Gerry diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index e4695985f9de..66d7dbe56926 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -346,7 +346,7 @@ static void probe_pci_root_info(struct pci_root_info *info, "no IO and memory resources present in _CRS\n"); else resource_list_for_each_entry_safe(entry, tmp, list) { - if ((entry->res->flags & IORESOURCE_WINDOW) == 0 || + if ((entry->res->flags & (IORESOURCE_WINDOW | IORESOURCE_IO)) == IORESOURCE_IO || (entry->res->flags & IORESOURCE_DISABLED)) resource_list_destroy_entry(entry); else > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
