Hotplug on PCIe should work with ARM, however the necessary PCIe hotplug is not availale as the menu items for PCI hotplug have not been included. Add the include of PCI hotplug support to the ARM main Kconfig so that it can be selected. The only issue that was found during this is that the PCI code did not assign interrupts properly to newly probed devices. This will need to be fixed for any interrupt capable devices. This has been tested on a Marvell 88F6281 with a TI XIO3130 PCIe bridge (with hotplug enabled) and fixes for IRQ assignment added. Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> -- CC: Linux ARM Kernel list <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx> CC: Russell King <linux@xxxxxxxxxxxxxxxx> CC: Linux Kernel Mailing List <linux-kernel@xxxxxxxxxxxxxxx> CC: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> CC: Linux PCI List <linux-pci@xxxxxxxxxxxxxxx> --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9f1f09a..4574ab4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1302,6 +1302,7 @@ config PCI_HOST_ITE8152 select DMABOUNCE source "drivers/pci/Kconfig" +source "drivers/pci/hotplug/Kconfig" source "drivers/pci/pcie/Kconfig" source "drivers/pcmcia/Kconfig" -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
