Re: [PATCH v3 4/9] x86, pci, acpi: Move arch-agnostic MMCONFIG (aka ECAM) and ACPI code out of arch/x86/ directory

[Tomasz Nowicki <tomasz.nowicki@xxxxxxxxxx>]

On 13.03.2015 17:35, Mark Salter wrote:
> On Tue, 2015-03-10 at 12:35 +0100, Tomasz Nowicki wrote:
> > ECAM standard and MCFG table are architecture independent and it makes
> > sense to share common code across all architectures. Both are going to
> > corresponding files - ecam.c and mcfg.c
> >
> > While we are here, rename pci_parse_mcfg to acpi_parse_mcfg.
> > We already have acpi_parse_mcfg prototype which is used nowhere.
> > At the same time, we need pci_parse_mcfg been global so acpi_parse_mcfg
> > can be used perfectly here.
> >
> > Signed-off-by: Tomasz Nowicki <tomasz.nowicki@xxxxxxxxxx>
> > ---
> >   arch/x86/Kconfig               |   2 +
> >   arch/x86/include/asm/pci_x86.h |  33 -----
> >   arch/x86/pci/acpi.c            |   1 +
> >   arch/x86/pci/mmconfig-shared.c | 296 +----------------------------------------
> >   arch/x86/pci/mmconfig_32.c     |   1 +
> >   arch/x86/pci/mmconfig_64.c     |   1 +
> >   arch/x86/pci/numachip.c        |   1 +
> >   drivers/acpi/Makefile          |   1 +
> >   drivers/acpi/mcfg.c            |  81 +++++++++++
> >   drivers/pci/Kconfig            |   4 +
> >   drivers/pci/Makefile           |   5 +
> >   drivers/pci/ecam.c             | 243 +++++++++++++++++++++++++++++++++
> >   include/linux/ecam.h           |  51 +++++++
> >   13 files changed, 394 insertions(+), 326 deletions(-)
> >   create mode 100644 drivers/acpi/mcfg.c
> >   create mode 100644 drivers/pci/ecam.c
> >   create mode 100644 include/linux/ecam.h
> >
> > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> > index c2fb8a8..dd926f4 100644
> > --- a/arch/x86/Kconfig
> > +++ b/arch/x86/Kconfig
> > @@ -2276,6 +2276,7 @@ config PCI_DIRECT
> >
> >   config PCI_MMCONFIG
> >   	def_bool y
> > +	select PCI_ECAM
> >   	depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY)
> >
> >   config PCI_OLPC
> > @@ -2293,6 +2294,7 @@ config PCI_DOMAINS
> >
> >   config PCI_MMCONFIG
> >   	bool "Support mmconfig PCI config space access"
> > +	select PCI_ECAM
> >   	depends on X86_64 && PCI && ACPI
> >
> >   config PCI_CNB20LE_QUIRK
> > diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
> > index c57c225..e8a237f 100644
> > --- a/arch/x86/include/asm/pci_x86.h
> > +++ b/arch/x86/include/asm/pci_x86.h
> > @@ -122,41 +122,8 @@ extern int pci_legacy_init(void);
> >   extern void pcibios_fixup_irqs(void);
> >
> >   /* pci-mmconfig.c */
> > -
> > -/* "PCI MMCONFIG %04x [bus %02x-%02x]" */
> > -#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2)
> > -
> > -struct pci_mmcfg_region {
> > -	struct list_head list;
> > -	struct resource res;
> > -	u64 address;
> > -	char __iomem *virt;
> > -	u16 segment;
> > -	u8 start_bus;
> > -	u8 end_bus;
> > -	char name[PCI_MMCFG_RESOURCE_NAME_LEN];
> > -};
> > -
> > -struct pci_mmcfg_mmio_ops {
> > -	u32 (*read)(int len, void __iomem *addr);
> > -	void (*write)(int len, void __iomem *addr, u32 value);
> > -};
> > -
> > -extern int __init pci_mmcfg_arch_init(void);
> > -extern void __init pci_mmcfg_arch_free(void);
> > -extern int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg);
> > -extern void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg);
> >   extern int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
> >   			       phys_addr_t addr);
> > -extern int pci_mmconfig_delete(u16 seg, u8 start, u8 end);
> > -extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus);
> > -extern u32 pci_mmio_read(int len, void __iomem *addr);
> > -extern void pci_mmio_write(int len, void __iomem *addr, u32 value);
> > -extern void pci_mmconfig_register_mmio(struct pci_mmcfg_mmio_ops *ops);
> > -
> > -extern struct list_head pci_mmcfg_list;
> > -
> > -#define PCI_MMCFG_BUS_OFFSET(bus)      ((bus) << 20)
> >
> >   /*
> >    * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
> > diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
> > index 6ac2738..5dfccef 100644
> > --- a/arch/x86/pci/acpi.c
> > +++ b/arch/x86/pci/acpi.c
> > @@ -4,6 +4,7 @@
> >   #include <linux/irq.h>
> >   #include <linux/dmi.h>
> >   #include <linux/slab.h>
> > +#include <linux/ecam.h>
> >   #include <asm/numa.h>
> >   #include <asm/pci_x86.h>
> >
> > diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
> > index 685cd4c..5064302 100644
> > --- a/arch/x86/pci/mmconfig-shared.c
> > +++ b/arch/x86/pci/mmconfig-shared.c
> > @@ -18,6 +18,7 @@
> >   #include <linux/slab.h>
> >   #include <linux/mutex.h>
> >   #include <linux/rculist.h>
> > +#include <linux/ecam.h>
> >   #include <asm/e820.h>
> >   #include <asm/pci_x86.h>
> >   #include <asm/acpi.h>
> > @@ -27,52 +28,6 @@
> >   /* Indicate if the mmcfg resources have been placed into the resource table. */
> >   static bool pci_mmcfg_running_state;
> >   static bool pci_mmcfg_arch_init_failed;
> > -static DEFINE_MUTEX(pci_mmcfg_lock);
> > -
> > -LIST_HEAD(pci_mmcfg_list);
> > -
> > -static u32
> > -pci_mmconfig_generic_read(int len, void __iomem *addr)
> > -{
> > -	u32 data = 0;
> > -
> > -	switch (len) {
> > -	case 1:
> > -		data = readb(addr);
> > -		break;
> > -	case 2:
> > -		data = readw(addr);
> > -		break;
> > -	case 4:
> > -		data = readl(addr);
> > -		break;
> > -	}
> > -
> > -	return data;
> > -}
> > -
> > -static void
> > -pci_mmconfig_generic_write(int len, void __iomem *addr, u32 value)
> > -{
> > -	switch (len) {
> > -	case 1:
> > -		writeb(value, addr);
> > -		break;
> > -	case 2:
> > -		writew(value, addr);
> > -		break;
> > -	case 4:
> > -		writel(value, addr);
> > -		break;
> > -	}
> > -}
> > -
> > -static struct pci_mmcfg_mmio_ops pci_mmcfg_mmio_default = {
> > -	.read = pci_mmconfig_generic_read,
> > -	.write = pci_mmconfig_generic_write,
> > -};
> > -
> > -static struct pci_mmcfg_mmio_ops *pci_mmcfg_mmio = &pci_mmcfg_mmio_default;
> >
> >   static u32
> >   pci_mmconfig_amd_read(int len, void __iomem *addr)
> > @@ -115,128 +70,6 @@ static struct pci_mmcfg_mmio_ops pci_mmcfg_mmio_amd_fam10h = {
> >   	.write = pci_mmconfig_amd_write,
> >   };
> >
> > -void
> > -pci_mmconfig_register_mmio(struct pci_mmcfg_mmio_ops *ops)
> > -{
> > -	pci_mmcfg_mmio = ops;
> > -}
> > -
> > -u32
> > -pci_mmio_read(int len, void __iomem *addr)
> > -{
> > -	if (!pci_mmcfg_mmio) {
> > -		pr_err("PCI config space has no accessors !");
> > -		return 0;
> > -	}
> > -
> > -	return pci_mmcfg_mmio->read(len, addr);
> > -}
> > -
> > -void
> > -pci_mmio_write(int len, void __iomem *addr, u32 value)
> > -{
> > -	if (!pci_mmcfg_mmio) {
> > -		pr_err("PCI config space has no accessors !");
> > -		return;
> > -	}
> > -
> > -	pci_mmcfg_mmio->write(len, addr, value);
> > -}
> > -
> > -static void __init pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
> > -{
> > -	if (cfg->res.parent)
> > -		release_resource(&cfg->res);
> > -	list_del(&cfg->list);
> > -	kfree(cfg);
> > -}
> > -
> > -static void __init free_all_mmcfg(void)
> > -{
> > -	struct pci_mmcfg_region *cfg, *tmp;
> > -
> > -	pci_mmcfg_arch_free();
> > -	list_for_each_entry_safe(cfg, tmp, &pci_mmcfg_list, list)
> > -		pci_mmconfig_remove(cfg);
> > -}
> > -
> > -static void list_add_sorted(struct pci_mmcfg_region *new)
> > -{
> > -	struct pci_mmcfg_region *cfg;
> > -
> > -	/* keep list sorted by segment and starting bus number */
> > -	list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list) {
> > -		if (cfg->segment > new->segment ||
> > -		    (cfg->segment == new->segment &&
> > -		     cfg->start_bus >= new->start_bus)) {
> > -			list_add_tail_rcu(&new->list, &cfg->list);
> > -			return;
> > -		}
> > -	}
> > -	list_add_tail_rcu(&new->list, &pci_mmcfg_list);
> > -}
> > -
> > -static struct pci_mmcfg_region *pci_mmconfig_alloc(int segment, int start,
> > -						   int end, u64 addr)
> > -{
> > -	struct pci_mmcfg_region *new;
> > -	struct resource *res;
> > -
> > -	if (addr == 0)
> > -		return NULL;
> > -
> > -	new = kzalloc(sizeof(*new), GFP_KERNEL);
> > -	if (!new)
> > -		return NULL;
> > -
> > -	new->address = addr;
> > -	new->segment = segment;
> > -	new->start_bus = start;
> > -	new->end_bus = end;
> > -
> > -	res = &new->res;
> > -	res->start = addr + PCI_MMCFG_BUS_OFFSET(start);
> > -	res->end = addr + PCI_MMCFG_BUS_OFFSET(end + 1) - 1;
> > -	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
> > -	snprintf(new->name, PCI_MMCFG_RESOURCE_NAME_LEN,
> > -		 "PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end);
> > -	res->name = new->name;
> > -
> > -	return new;
> > -}
> > -
> > -static struct pci_mmcfg_region *__init pci_mmconfig_add(int segment, int start,
> > -							int end, u64 addr)
> > -{
> > -	struct pci_mmcfg_region *new;
> > -
> > -	new = pci_mmconfig_alloc(segment, start, end, addr);
> > -	if (new) {
> > -		mutex_lock(&pci_mmcfg_lock);
> > -		list_add_sorted(new);
> > -		mutex_unlock(&pci_mmcfg_lock);
> > -
> > -		pr_info(PREFIX
> > -		       "MMCONFIG for domain %04x [bus %02x-%02x] at %pR "
> > -		       "(base %#lx)\n",
> > -		       segment, start, end, &new->res, (unsigned long)addr);
> > -	}
> > -
> > -	return new;
> > -}
> > -
> > -struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus)
> > -{
> > -	struct pci_mmcfg_region *cfg;
> > -
> > -	list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list)
> > -		if (cfg->segment == segment &&
> > -		    cfg->start_bus <= bus && bus <= cfg->end_bus)
> > -			return cfg;
> > -
> > -	return NULL;
> > -}
> > -
> >   static const char *__init pci_mmcfg_e7520(void)
> >   {
> >   	u32 win;
> > @@ -657,73 +490,6 @@ static void __init pci_mmcfg_reject_broken(int early)
> >   	}
> >   }
> >
> > -static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
> > -					struct acpi_mcfg_allocation *cfg)
> > -{
> > -	int year;
> > -
> > -	if (cfg->address < 0xFFFFFFFF)
> > -		return 0;
> > -
> > -	if (!strncmp(mcfg->header.oem_id, "SGI", 3))
> > -		return 0;
> > -
> > -	if (mcfg->header.revision >= 1) {
> > -		if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) &&
> > -		    year >= 2010)
> > -			return 0;
> > -	}
> > -
> > -	pr_err(PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx "
> > -	       "is above 4GB, ignored\n", cfg->pci_segment,
> > -	       cfg->start_bus_number, cfg->end_bus_number, cfg->address);
> > -	return -EINVAL;
> > -}
>
> This looks very arch-specific. Shouldn't this be only generic checks
> with some hook for architectures to add arch-specific checks?

Yes, you are right it should go to arch specific call. Thanks.

Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html