Re: [PATCH v12 17/21] powerpc/powernv: Shift VF resource with an offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 24, 2015 at 03:00:37AM -0600, Bjorn Helgaas wrote:
>On Tue, Feb 24, 2015 at 02:34:57AM -0600, Bjorn Helgaas wrote:
>> From: Wei Yang <weiyang@xxxxxxxxxxxxxxxxxx>
>> 
>> On PowerNV platform, resource position in M64 implies the PE# the resource
>> belongs to.  In some cases, adjustment of a resource is necessary to locate
>> it to a correct position in M64.
>> 
>> Add pnv_pci_vf_resource_shift() to shift the 'real' PF IOV BAR address
>> according to an offset.
>> 
>> [bhelgaas: rework loops, rework overlap check, index resource[]
>> conventionally, remove pci_regs.h include, squashed with next patch]
>> Signed-off-by: Wei Yang <weiyang@xxxxxxxxxxxxxxxxxx>
>> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>
>...
>
>> +#ifdef CONFIG_PCI_IOV
>> +static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
>> +{
>> +	struct pci_dn *pdn = pci_get_pdn(dev);
>> +	int i;
>> +	struct resource *res, res2;
>> +	resource_size_t size;
>> +	u16 vf_num;
>> +
>> +	if (!dev->is_physfn)
>> +		return -EINVAL;
>> +
>> +	/*
>> +	 * "offset" is in VFs.  The M64 windows are sized so that when they
>> +	 * are segmented, each segment is the same size as the IOV BAR.
>> +	 * Each segment is in a separate PE, and the high order bits of the
>> +	 * address are the PE number.  Therefore, each VF's BAR is in a
>> +	 * separate PE, and changing the IOV BAR start address changes the
>> +	 * range of PEs the VFs are in.
>> +	 */
>> +	vf_num = pdn->vf_pes;
>> +	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
>> +		res = &dev->resource[i + PCI_IOV_RESOURCES];
>> +		if (!res->flags || !res->parent)
>> +			continue;
>> +
>> +		if (!pnv_pci_is_mem_pref_64(res->flags))
>> +			continue;
>> +
>> +		/*
>> +		 * The actual IOV BAR range is determined by the start address
>> +		 * and the actual size for vf_num VFs BAR.  This check is to
>> +		 * make sure that after shifting, the range will not overlap
>> +		 * with another device.
>> +		 */
>> +		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
>> +		res2.flags = res->flags;
>> +		res2.start = res->start + (size * offset);
>> +		res2.end = res2.start + (size * vf_num) - 1;
>> +
>> +		if (res2.end > res->end) {
>> +			dev_err(&dev->dev, "VF BAR%d: %pR would extend past %pR (trying to enable %d VFs shifted by %d)\n",
>> +				i, &res2, res, vf_num, offset);
>> +			return -EBUSY;
>> +		}
>> +	}
>> +
>> +	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
>> +		res = &dev->resource[i + PCI_IOV_RESOURCES];
>> +		if (!res->flags || !res->parent)
>> +			continue;
>> +
>> +		if (!pnv_pci_is_mem_pref_64(res->flags))
>> +			continue;
>> +
>> +		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
>> +		res2 = *res;
>> +		res->start += size * offset;
>
>I'm still not happy about this fiddling with res->start.
>
>Increasing res->start means that in principle, the "size * offset" bytes
>that we just removed from res are now available for allocation to somebody
>else.  I don't think we *will* give that space to anything else because of
>the alignment restrictions you're enforcing, but "res" now doesn't
>correctly describe the real resource map.
>
>Would you be able to just update the BAR here while leaving the struct
>resource alone?  In that case, it would look a little funny that lspci
>would show a BAR value in the middle of the region in /proc/iomem, but
>the /proc/iomem region would be more correct.

Bjorn,

I did some tests, while the result is not good.

What I did is still write the shifted resource address to the device by
pci_update_resource(), but I revert the res->start to the original one. If
this step is not correct, please let me know.

This can't work since after we revert the res->start, those VFs will be given
resources from res->start instead of (res->start + offset * size). This is not
what we expect.

I have rebased/clean/change the code according to your comments based on this
patch set. Will send it out v13 soon.

>
>> +
>> +		dev_info(&dev->dev, "VF BAR%d: %pR shifted to %pR (enabling %d VFs shifted by %d)\n",
>> +			 i, &res2, res, vf_num, offset);
>> +		pci_update_resource(dev, i + PCI_IOV_RESOURCES);
>> +	}
>> +	pdn->max_vfs -= offset;
>> +	return 0;
>> +}
>> +#endif /* CONFIG_PCI_IOV */

-- 
Richard Yang
Help you, Help me

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux