Re: [PATCH v1] of: calculate masks of the device based on dma-range size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/25/2015 07:20 PM, Bjorn Helgaas wrote:
[+cc Catalin]

On Wed, Feb 11, 2015 at 12:53:35PM -0500, Murali Karicheri wrote:
This patch update of_dma_configure() API to calculate the
masks (dma_mask and coherent_dma_mask) based on the dma-range
values set in DT for the device. Also limit the mask to lower
of the default mask and mask calculated.

Cc: Joerg Roedel<joro@xxxxxxxxxx>
Cc: Grant Likely<grant.likely@xxxxxxxxxx>
Cc: Rob Herring<robh+dt@xxxxxxxxxx>
Cc: Bjorn Helgaas<bhelgaas@xxxxxxxxxx>
Cc: Will Deacon<will.deacon@xxxxxxx>
Cc: Russell King<linux@xxxxxxxxxxxxxxxx>
Cc: Arnd Bergmann<arnd@xxxxxxxx>
Cc: Suravee Suthikulpanit<Suravee.Suthikulpanit@xxxxxxx>

Signed-off-by: Murali Karicheri<m-karicheri2@xxxxxx>

Applied with Catalin's reviewed-by to pci/iommu for v4.1, thanks!
Bjorn,

Could you point me to this? I didn't see it on pci/iommu of your repo below.

arm-pci git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git (fetch)

a0868495@ula0868495 ~/Project/linux-keystone $ gitlog arm-pci/pci/iommu
dd8a11b0f0d4ed0ad87c8d09e650f354021d7953 arm: dma-mapping: limit IOMMU mapping size 2a101e79dcd8733e3a353b0df2fa384980f94e1e PCI: Update DMA configuration from DT 3fd29d06e9aa92d9a4513e14b2dd3f0d69d4d2b7 of/pci: Add of_pci_dma_configure() to update DMA configuration 8243352097c468f982a9f386cb1f455672b473a2 PCI: Add helper functions pci_get[put]_host_bridge_device() 039f346ac880d4f894425ef6c540f3ff5c1b8dcf of: Fix size when dma-range is not used 2743a957f6a6317be06d02cc93d78bb2a847e427 of: Move of_dma_configure() to device.c to help re-use f454cd01b5bdffb1bf26a5cddac30439fa5f27a1 of: iommu: Add ptr to OF node arg to of_iommu_configure()
c517d838eb7d07bbe9507871fab3931deccff539 Linux 4.0-rc1

Murali


I agree with Catalin's comment about the "size = 1ULL<<  32" line.
I don't see how that will make a difference, so I dropped it.  The
patch I merged is below.  Let me know if you think we do need that
line or any other tweaks.

Bjorn

commit a5a1dd69080dfcf53bfd6e179f3db68e824aeaae
Author: Murali Karicheri<m-karicheri2@xxxxxx>
Date:   Wed Feb 25 17:21:04 2015 -0600

     of: Calculate device DMA masks based on DT dma-range size

     Calculate the dma_mask and coherent_dma_mask based on the dma-range values
     set in DT for the device.

     Limit the mask to lower of the default mask and mask calculated.

     Signed-off-by: Murali Karicheri<m-karicheri2@xxxxxx>
     Signed-off-by: Bjorn Helgaas<bhelgaas@xxxxxxxxxx>
     Reviewed-by: Catalin Marinas<catalin.marinas@xxxxxxx>
     CC: Joerg Roedel<joro@xxxxxxxxxx>
     CC: Grant Likely<grant.likely@xxxxxxxxxx>
     CC: Rob Herring<robh+dt@xxxxxxxxxx>
     CC: Will Deacon<will.deacon@xxxxxxx>
     CC: Russell King<linux@xxxxxxxxxxxxxxxx>
     CC: Arnd Bergmann<arnd@xxxxxxxx>
     CC: Suravee Suthikulpanit<Suravee.Suthikulpanit@xxxxxxx>

diff --git a/drivers/of/device.c b/drivers/of/device.c
index 28e743888402..20c1332a0018 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -90,10 +90,11 @@ void of_dma_configure(struct device *dev, struct device_node *np)
  	struct iommu_ops *iommu;

  	/*
-	 * Set default dma-mask to 32 bit.  Drivers are expected to setup
-	 * the correct supported dma_mask.
+	 * Set default coherent_dma_mask to 32 bit.  Drivers are expected to
+	 * setup the correct supported mask.
  	 */
-	dev->coherent_dma_mask = DMA_BIT_MASK(32);
+	if (!dev->coherent_dma_mask)
+		dev->coherent_dma_mask = DMA_BIT_MASK(32);

  	/*
  	 * Set it to coherent_dma_mask by default if the architecture
@@ -128,6 +129,15 @@ void of_dma_configure(struct device *dev, struct device_node *np)

  	dev->dma_pfn_offset = offset;

+	/*
+	 * Limit coherent and dma mask based on size and default mask
+	 * set by the driver.
+	 */
+	dev->coherent_dma_mask = min(dev->coherent_dma_mask,
+				     DMA_BIT_MASK(ilog2(dma_addr + size)));
+	*dev->dma_mask = min((*dev->dma_mask),
+			     DMA_BIT_MASK(ilog2(dma_addr + size)));
+
  	coherent = of_dma_is_coherent(np);
  	dev_dbg(dev, "device is%sdma coherent\n",
  		coherent ? " " : " not ");


--
Murali Karicheri
Linux Kernel, Texas Instruments
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux