On 2015/3/3 9:57, Bjorn Helgaas wrote:
> On Thu, Feb 26, 2015 at 04:11:56PM +0800, Yijing Wang wrote:
>> Just like pci_scan_bus(), we also should rip out
>> pci_bus_add_devices() from pci_scan_root_bus().
>> Lots platforms first call pci_scan_root_bus(), but
>> after that, they call pci_bus_size_bridges() and
>> pci_bus_assign_resources(). Place pci_bus_add_devices()
>> in pci_scan_root_bus() hurts PCI scan logic.
>> For arm hw_pci->scan() functions which call
>> pci_scan_root_bus(), it's no need to change anything,
>> because pci_bus_add_devices() will be called later
>> in pci_common_init_dev().
>>
>> Signed-off-by: Yijing Wang <wangyijing@xxxxxxxxxx>
>> CC: Richard Henderson <rth@xxxxxxxxxxx>
>> CC: Ivan Kokshaysky <ink@xxxxxxxxxxxxxxxxxxxx>
>> CC: Matt Turner <mattst88@xxxxxxxxx>
>> CC: David Howells <dhowells@xxxxxxxxxx>
>> CC: Tony Luck <tony.luck@xxxxxxxxx>
>> CC: Michal Simek <monstr@xxxxxxxxx>
>> CC: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
>> CC: Koichi Yasutake <yasutake.koichi@xxxxxxxxxxxxxxxx>
>> CC: Sebastian Ott <sebott@xxxxxxxxxxxxxxxxxx>
>> CC: "David S. Miller" <davem@xxxxxxxxxxxxx>
>> CC: Chris Metcalf <cmetcalf@xxxxxxxxxx>
>> CC: Chris Zankel <chris@xxxxxxxxxx>
>> CC: Max Filippov <jcmvbkbc@xxxxxxxxx>
>> CC: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
>> CC: linux-alpha@xxxxxxxxxxxxxxx
>> CC: linux-kernel@xxxxxxxxxxxxxxx
>> CC: linux-mips@xxxxxxxxxxxxxx
>> CC: linux-am33-list@xxxxxxxxxx
>> CC: linux-s390@xxxxxxxxxxxxxxx
>> CC: linux-sh@xxxxxxxxxxxxxxx
>> CC: sparclinux@xxxxxxxxxxxxxxx
>> CC: linux-xtensa@xxxxxxxxxxxxxxxx
>> ---
>> arch/alpha/kernel/pci.c | 2 ++
>> arch/frv/mb93090-mb00/pci-vdk.c | 6 ++++--
>> arch/ia64/sn/kernel/io_init.c | 1 +
>> arch/microblaze/pci/pci-common.c | 1 +
>> arch/mips/pci/pci.c | 1 +
>> arch/mn10300/unit-asb2305/pci.c | 5 ++++-
>> arch/s390/pci/pci.c | 2 +-
>> arch/sh/drivers/pci/pci.c | 1 +
>> arch/sparc/kernel/leon_pci.c | 1 +
>> arch/tile/kernel/pci.c | 2 ++
>> arch/tile/kernel/pci_gx.c | 2 ++
>> arch/x86/pci/common.c | 1 +
>> arch/xtensa/kernel/pci.c | 2 ++
>> drivers/pci/probe.c | 1 -
>> 14 files changed, 23 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
>> index 98a1525..518b767 100644
>> --- a/arch/alpha/kernel/pci.c
>> +++ b/arch/alpha/kernel/pci.c
>> @@ -338,6 +338,8 @@ common_init_pci(void)
>>
>> bus = pci_scan_root_bus(NULL, next_busno, alpha_mv.pci_ops,
>> hose, &resources);
>> + if (bus)
>> + pci_bus_add_devices(bus);
>> hose->bus = bus;
>> hose->need_domain_info = need_domain_info;
>> next_busno = bus->busn_res.end + 1;
>
> This doesn't look right. The code above is inside a loop, and just after
> the loop we have:
>
> pci_assign_unassigned_resources();
> pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
>
> I think the pci_bus_add_devices() needs to go inside another loop after
> the assign and fixup_irqs code.
What about introduce a new function to add all pci bus here like:
pci_bus_add_devices_all()
{
struct pci_bus *root_bus;
list_for_each_entry(root_bus, &pci_root_buses, node)
pci_bus_add_devices(root_bus);
}
pci_assign_unassigned_resources();
pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
pci_bus_add_devices_all();
>
> You didn't fix arm, but I think it has the same problem:
>
> pci_common_init_dev
> pcibios_init_hw
> pci_scan_root_bus
> pci_fixup_irqs
> pci_bus_size_bridges
> pci_bus_assign_resources
void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
{
struct pci_sys_data *sys;
LIST_HEAD(head);
pci_add_flags(PCI_REASSIGN_ALL_RSRC);
if (hw->preinit)
hw->preinit();
pcibios_init_hw(parent, hw, &head); --------> scan root bus
if (hw->postinit)
hw->postinit();
pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
list_for_each_entry(sys, &head, node) {
struct pci_bus *bus = sys->bus;
if (!pci_has_flag(PCI_PROBE_ONLY)) {
/*
* Size the bridge windows.
*/
pci_bus_size_bridges(bus);
/*
* Assign resources.
*/
pci_bus_assign_resources(bus);
}
/*
* Tell drivers about devices found.
*/
pci_bus_add_devices(bus); ------>try to attach driver
}
pci_bus_add_devices() is already in loops, so what problem here do you mean ?
>
>> diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
>> index b073f4d..4b63781 100644
>> --- a/arch/frv/mb93090-mb00/pci-vdk.c
>> +++ b/arch/frv/mb93090-mb00/pci-vdk.c
>> - pci_scan_root_bus(NULL, 0, pci_root_ops, NULL, &resources);
>> + bus = pci_scan_root_bus(NULL, 0, pci_root_ops, NULL, &resources);
>>
>> pcibios_irq_init();
>> pcibios_fixup_irqs();
>> pcibios_resource_survey();
>> -
>> + if (bus)
>> + pci_bus_add_devices(bus);
>
> It's one more line of code, but personally I would write:
>
> if (!bus)
> return 0;
>
> pci_bus_add_devices(bus);
> return 0;
>
OK, will update it.
>> return 0;
>> }
>>
>> diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
>> index 0b5ce82..63b43a6 100644
>> --- a/arch/ia64/sn/kernel/io_init.c
>> +++ b/arch/ia64/sn/kernel/io_init.c
>> @@ -272,6 +272,7 @@ sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
>> kfree(res);
>> kfree(controller);
>
> This needs a "return;" right here. Otherwise we'll call
> pci_bus_add_devices(NULL) below.
>
Sorry for my mistake, will correct it.
>> }
>> + pci_bus_add_devices(bus);
>> }
>>
>> /*
>> diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
>> index 48528fb..d8bbad9 100644
>> --- a/arch/microblaze/pci/pci-common.c
>> +++ b/arch/microblaze/pci/pci-common.c
>> @@ -1362,6 +1362,7 @@ static void pcibios_scan_phb(struct pci_controller *hose)
>> hose->bus = bus;
>>
>> hose->last_busno = bus->busn_res.end;
>> + pci_bus_add_devices(bus);
>> }
>
> I think this is still wrong:
>
> pcibios_init
> pcibios_scan_phb
> pci_scan_root_bus
> pci_bus_add_devices
> pcibios_resource_survey <-- oops
We could also call pci_bus_add_devices_all() like above here ?
>>
>> static int __init pcibios_init(void)
>> diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
>> index 1bf60b1..9eb54b5 100644
>> --- a/arch/mips/pci/pci.c
>> +++ b/arch/mips/pci/pci.c
>> @@ -114,6 +114,7 @@ static void pcibios_scanbus(struct pci_controller *hose)
>> pci_bus_size_bridges(bus);
>> pci_bus_assign_resources(bus);
>> }
>> + pci_bus_add_devices(bus);
>> }
>
> I would add a new patch at the end of your series to cosmetically
> restructure this as:
>
> if (!bus)
> return;
>
> next_busno = bus->busn_res.end + 1;
> ...
> pci_bus_add_devices(bus);
>
That's good.
>> }
>>
>> diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
>> index 613ca1e..2a815c1 100644
>> --- a/arch/mn10300/unit-asb2305/pci.c
>> +++ b/arch/mn10300/unit-asb2305/pci.c
>> @@ -340,6 +340,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
>> */
>> static int __init pcibios_init(void)
>> {
>> + struct pci_bus *bus;
>> resource_size_t io_offset, mem_offset;
>> LIST_HEAD(resources);
>>
>> @@ -371,11 +372,13 @@ static int __init pcibios_init(void)
>>
>> pci_add_resource_offset(&resources, &pci_ioport_resource, io_offset);
>> pci_add_resource_offset(&resources, &pci_iomem_resource, mem_offset);
>> - pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
>> + bus = pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
>>
>> pcibios_irq_init();
>> pcibios_fixup_irqs();
>> pcibios_resource_survey();
>> + if (bus)
>> + pci_bus_add_devices(bus);
>
> if (!bus)
> return 0;
> pci_bus_add_devices(bus);
>
OK
>> return 0;
>> }
>>
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
>> index 753a567..1534e5a 100644
>> --- a/arch/s390/pci/pci.c
>> +++ b/arch/s390/pci/pci.c
>> @@ -776,7 +776,7 @@ static int zpci_scan_bus(struct zpci_dev *zdev)
>> zpci_cleanup_bus_resources(zdev);
>> return -EIO;
>> }
>> -
>> + pci_bus_add_devices(zdev->bus);
>> zdev->bus->max_bus_speed = zdev->max_bus_speed;
>
> We should set zdev->bus->max_bus_speed before calling
> pci_bus_add_devices(). Some drivers look at max_bus_speed.
>
OK, will adjust the order.
>> return 0;
>> }
>> diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
>> index 1bc09ee..efc1051 100644
>> --- a/arch/sh/drivers/pci/pci.c
>> +++ b/arch/sh/drivers/pci/pci.c
>> @@ -69,6 +69,7 @@ static void pcibios_scanbus(struct pci_channel *hose)
>>
>> pci_bus_size_bridges(bus);
>> pci_bus_assign_resources(bus);
>> + pci_bus_add_devices(bus);
>> } else {
>> pci_free_resource_list(&resources);
>> }
>
> Cosmetic restructure (new patch at end of series):
>
> if (!bus) {
> pci_free_resource_list(&resources);
> return;
> }
>
> next_busno = bus->busn_res.end + 1;
> ...
> pci_bus_add_devices(bus);
OK.
>
>> diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
>> index 899b720..2971076 100644
>> --- a/arch/sparc/kernel/leon_pci.c
>> +++ b/arch/sparc/kernel/leon_pci.c
>> @@ -40,6 +40,7 @@ void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info)
>>
>> /* Assign devices with resources */
>> pci_assign_unassigned_resources();
>> + pci_bus_add_devices(root_bus);
>> } else {
>> pci_free_resource_list(&resources);
>> }
>
> Restructure this with the same pattern (in a new patch).
>
>> diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
>> index 325df47..9475a74 100644
>> --- a/arch/tile/kernel/pci.c
>> +++ b/arch/tile/kernel/pci.c
>> @@ -339,6 +339,8 @@ int __init pcibios_init(void)
>> struct pci_bus *next_bus;
>> struct pci_dev *dev;
>>
>> + pci_bus_add_devices(root_bus);
>> +
>> list_for_each_entry(dev, &root_bus->devices, bus_list) {
>> /*
>> * Find the PCI host controller, ie. the 1st
>> diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
>> index 2c95f37..d7a0729 100644
>> --- a/arch/tile/kernel/pci_gx.c
>> +++ b/arch/tile/kernel/pci_gx.c
>> @@ -916,6 +916,8 @@ int __init pcibios_init(void)
>> /* Configure the max_payload_size values for this domain. */
>> fixup_read_and_payload_sizes(controller);
>>
>> + pci_bus_add_devices(root_bus);
>> +
>> /* Alloc a PIO region for PCI memory access for each RC port. */
>> ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0);
>> if (ret < 0) {
>
> I don't know what all the magic gxio_trio_alloc and init stuff after this
> is, but it looks to me like the pci_bus_add_devices(root_bus) should be
> done *after* all of it.
I don't know much too, but I agree it, I would poke arch tile guys.
>
>> diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
>> index 3d2612b..0cbc723 100644
>> --- a/arch/x86/pci/common.c
>> +++ b/arch/x86/pci/common.c
>> @@ -491,6 +491,7 @@ void pcibios_scan_root(int busnum)
>> pci_free_resource_list(&resources);
>> kfree(sd);
>> }
>> + pci_bus_add_devices(bus);
>
> This one is tricky. I don't think your patch makes it any worse than it is
> today, but it doesn't fix the problem. We need to either fix it or call it
> out in the changelog.
>
> pci_subsys_init # subsys_initcall (level 4)
> pci_legacy_init
> pcibios_scan_root
> pci_scan_root_bus
> pci_bus_add_devices
>
> pcibios_assign_resources # fs_initcall (level 5)
>
I would like to keep it here, and we know that in this routine,
it is always in system boot up context. Which do you prefer ?
>> }
>>
>> void __init pcibios_set_cache_line_size(void)
>> diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c
>> index 5b34033..f2ae64e 100644
>> --- a/arch/xtensa/kernel/pci.c
>> +++ b/arch/xtensa/kernel/pci.c
>> @@ -185,6 +185,8 @@ static int __init pcibios_init(void)
>> pci_controller_apertures(pci_ctrl, &resources);
>> bus = pci_scan_root_bus(NULL, pci_ctrl->first_busno,
>> pci_ctrl->ops, pci_ctrl, &resources);
>> + if (bus)
>> + pci_bus_add_devices(bus);
>> pci_ctrl->bus = bus;
>> pci_ctrl->last_busno = bus->busn_res.end;
>
> Oops, we just dereferenced a potentially NULL pointer here (of course, this
> could happen even before your patch).
>
> I don't understand the platform_pcibios_fixup() that follows. I can't find
> a definition of that, but it sounds like something that maybe should happen
> before pci_bus_add_devices().
I Will move the pci_bus_add_devices() after the platform_pcibios_fixup(),
because now only driver attachment in it, I think delay it is safe.
Thanks!
Yijing.
>
>> if (next_busno <= pci_ctrl->last_busno)
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index 88604f2..8ef0375 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -2087,7 +2087,6 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
>> if (!found)
>> pci_bus_update_busn_res_end(b, max);
>>
>> - pci_bus_add_devices(b);
>> return b;
>> }
>> EXPORT_SYMBOL(pci_scan_root_bus);
>> --
>> 1.7.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> .
>
--
Thanks!
Yijing
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
