On Tue, Jan 13, 2015 at 11:26:50AM -0700, Alex Williamson wrote:
> As noted in the added comment, this device is actually an Intel 80333
> I/O processor where the exposed device at 0e.0 is actually the address
> translation unit of the I/O processor and a hidden, private device at
> 01.0 masters the DMA for the device. In order to enable the IOMMU, we
> therefore need to create a fixed alias between the exposed and hidden
> devfn.
>
> Scenarios like this are potentially likely for any device incorporating
> this I/O processor, so this little bit of abstraction with the fixed
> alias table should make future additions trivial.
>
> Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> Cc: Adaptec OEM Raid Solutions <aacraid@xxxxxxxxxxx>
I added the symptoms (log messages) to the changelog and applied this to
pci/virtualization for v3.20, thanks!
> ---
>
> drivers/pci/quirks.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index ed6f89b..19bdb17 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -3528,6 +3528,43 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON,
> quirk_dma_func1_alias);
>
> /*
> + * Some devices DMA with the wrong devfn, not just the wrong function.
> + * quirk_fixed_dma_alias() uses this table to create fixed aliass, where
> + * the alias is "fixed" and independent of the device devfn.
> + *
> + * For example, the Adaptec 3405 is a PCIe card making use of an Intel 80333
> + * I/O processor. To software, this appears as a straightforward PCIe-to-PCI/X
> + * bridge with a single device on the subordinate bus. In reality, the exposed
> + * device at 0e.0 is the Address Translation Unit (ATU) of the controller that
> + * provides a bridge to the internal bus of the I/O processor. The controller
> + * supports private devices, which can be hidden from PCI config space. In the
> + * case of the Adaptec 3405, a private device at 01.0 appears to be the DMA
> + * engine, which therefore needs to become a DMA alias for the device.
> + */
> +static const struct pci_device_id fixed_dma_alias_tbl[] = {
> + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
> + PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */
> + .driver_data = PCI_DEVFN(1, 0) },
> + { 0 }
> +};
> +
> +static void quirk_fixed_dma_alias(struct pci_dev *dev)
> +{
> + const struct pci_device_id *id;
> +
> + id = pci_match_id(fixed_dma_alias_tbl, dev);
> + if (id) {
> + dev->dma_alias_devfn = id->driver_data;
> + dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
> + dev_info(&dev->dev, "Enabling fixed DMA alias to %02x.%d\n",
> + PCI_SLOT(dev->dma_alias_devfn),
> + PCI_FUNC(dev->dma_alias_devfn));
> + }
> +}
> +
> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias);
> +
> +/*
> * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in
> * using the wrong DMA alias for the device. Some of these devices can be
> * used as either forward or reverse bridges, so we need to test whether the
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
