Hi Rob,
On 10/01/15 12:34, Rob Herring wrote:
Convert the ks8695 PCI driver to use the generic config access functions.
This changes accesses from __raw_readX/__raw_writeX to readX/writeX
variants.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
Cc: Greg Ungerer <gerg@xxxxxxxxxxx>
I wasn't CC'ed on the generic implementation patch ("pci: introduce
common pci config space accessors"), but I assume this is it:
https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg800405.html
That all looks ok to me. I have not tested it, but:
Acked-by: Greg Ungerer <gerg@xxxxxxxxxxx>
Regards
Greg
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
---
arch/arm/mach-ks8695/pci.c | 77 ++++------------------------------------------
1 file changed, 6 insertions(+), 71 deletions(-)
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index bb18193..c1bc4c3 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -38,8 +38,6 @@
static int pci_dbg;
-static int pci_cfg_dbg;
-
static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
{
@@ -59,75 +57,11 @@ static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsi
}
}
-
-/*
- * The KS8695 datasheet prohibits anything other than 32bit accesses
- * to the IO registers, so all our configuration must be done with
- * 32bit operations, and the correct bit masking and shifting.
- */
-
-static int ks8695_pci_readconfig(struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 *value)
-{
- ks8695_pci_setupconfig(bus->number, devfn, where);
-
- *value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
-
- switch (size) {
- case 4:
- break;
- case 2:
- *value = *value >> ((where & 2) * 8);
- *value &= 0xffff;
- break;
- case 1:
- *value = *value >> ((where & 3) * 8);
- *value &= 0xff;
- break;
- }
-
- if (pci_cfg_dbg) {
- printk("read: %d,%08x,%02x,%d: %08x (%08x)\n",
- bus->number, devfn, where, size, *value,
- __raw_readl(KS8695_PCI_VA + KS8695_PBCD));
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int ks8695_pci_writeconfig(struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 value)
+static void __iomem *ks8695_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
{
- unsigned long tmp;
-
- if (pci_cfg_dbg) {
- printk("write: %d,%08x,%02x,%d: %08x\n",
- bus->number, devfn, where, size, value);
- }
-
ks8695_pci_setupconfig(bus->number, devfn, where);
-
- switch (size) {
- case 4:
- __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
- break;
- case 2:
- tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
- tmp &= ~(0xffff << ((where & 2) * 8));
- tmp |= value << ((where & 2) * 8);
-
- __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
- break;
- case 1:
- tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
- tmp &= ~(0xff << ((where & 3) * 8));
- tmp |= value << ((where & 3) * 8);
-
- __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
+ return KS8695_PCI_VA + KS8695_PBCD;
}
static void ks8695_local_writeconfig(int where, u32 value)
@@ -137,8 +71,9 @@ static void ks8695_local_writeconfig(int where, u32 value)
}
static struct pci_ops ks8695_pci_ops = {
- .read = ks8695_pci_readconfig,
- .write = ks8695_pci_writeconfig,
+ .map_bus = ks8695_pci_map_bus,
+ .read = pci_generic_config_read32,
+ .write = pci_generic_config_write32,
};
static struct resource pci_mem = {
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
