Am Montag, den 22.12.2014, 12:09 +0530 schrieb Pratyush Anand:
> Config space is need to be allocated using reg property. This patch
> removes possibility of config space allocation through ranges property.
>
> To: Mohit Kumar <mohit.kumar@xxxxxx>
> To: Jingo Han <jg1.han@xxxxxxxxxxx>
> To: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> To: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Pratyush Anand <panand@xxxxxxxxxx>
This patch gets a clear NACK from me.
While removing the config space from the ranges in the relevant DTs is
ok you are breaking DT compatibility for the sake of it.
I don't see how this patch improves anything. We already warn loudly in
the designware driver if config space isn't available in the regs
property.
We already had a break in DT compatibility on imx6 to get the bindings
right and I will not allow another one to happen unless there is a clear
benefit.
Regards,
Lucas
> ---
> arch/arm/boot/dts/imx6qdl.dtsi | 3 +--
> arch/arm/boot/dts/imx6sx.dtsi | 8 ++++----
> drivers/pci/host/pci-imx6.c | 2 +-
> drivers/pci/host/pcie-designware.c | 13 -------------
> 4 files changed, 6 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 4fc03b7f1cee..f21570847d08 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -143,8 +143,7 @@
> #address-cells = <3>;
> #size-cells = <2>;
> device_type = "pci";
> - ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
> - 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
> + ranges = 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
> 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
> num-lanes = <1>;
> interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> index 7a24fee1e7ae..72593a77455e 100644
> --- a/arch/arm/boot/dts/imx6sx.dtsi
> +++ b/arch/arm/boot/dts/imx6sx.dtsi
> @@ -1197,14 +1197,14 @@
>
> pcie: pcie@0x08000000 {
> compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
> - reg = <0x08ffc000 0x4000>; /* DBI */
> + reg = <0x08ffc000 0x4000>, /* DBI */
> + <0x08f00000 0x80000>;
> + reg-names = "dbi", "config";
> #address-cells = <3>;
> #size-cells = <2>;
> device_type = "pci";
> - /* configuration space */
> - ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
> /* downstream I/O */
> - 0x81000000 0 0 0x08f80000 0 0x00010000
> + ranges = 0x81000000 0 0 0x08f80000 0 0x00010000
> /* non-prefetchable memory */
> 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
> num-lanes = <1>;
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index fdb95367721e..dae452984ed3 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
> @@ -572,7 +572,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
> hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
> "imprecise external abort");
>
> - dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
Additionally to the change below this is also breaking existing DTs.
> pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
> if (IS_ERR(pp->dbi_base))
> return PTR_ERR(pp->dbi_base);
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index df781cdf13c1..0b22b42e1ff9 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -409,19 +409,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> pp->mem_mod_base = of_read_number(parser.range -
> parser.np + na, ns);
> }
> - if (restype == 0) {
> - of_pci_range_to_resource(&range, np, &pp->cfg);
> - pp->cfg0_size = resource_size(&pp->cfg)/2;
> - pp->cfg1_size = resource_size(&pp->cfg)/2;
> - pp->cfg0_base = pp->cfg.start;
> - pp->cfg1_base = pp->cfg.start + pp->cfg0_size;
> -
> - /* Find the untranslated configuration space address */
> - pp->cfg0_mod_base = of_read_number(parser.range -
> - parser.np + na, ns);
> - pp->cfg1_mod_base = pp->cfg0_mod_base +
> - pp->cfg0_size;
> - }
> }
>
> ret = of_pci_parse_bus_range(np, &pp->busn);
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
