This patchset contains the initial PCIe support for Broadcom iProc family of SoCs. This driver has been validated with Cygnus and NSP and is expected to work on other iProc family of SoCs that deploy the same PCIe controller Changes from v1: - Add standard PCI interrupt DT properties "#interrupt-cells", "interrupt-map-mask" and "interrupt-map" so legacy INTx interrupts can be supported by using standard PCI OF IRQ parsing function - Get rid of custom IRQ mapping function in the driver. Use of_irq_parse_and_map_pci instead Ray Jui (4): pci: iProc: define Broadcom iProc PCIe binding PCI: iproc: Add Broadcom iProc PCIe driver ARM: mach-bcm: Enable PCIe support for iProc ARM: dts: enable PCIe for Broadcom Cygnus .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 74 ++ arch/arm/boot/dts/bcm-cygnus.dtsi | 52 ++ arch/arm/boot/dts/bcm958300k.dts | 8 + arch/arm/mach-bcm/Kconfig | 1 + drivers/pci/host/Kconfig | 9 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-iproc.c | 888 ++++++++++++++++++++ 7 files changed, 1033 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt create mode 100644 drivers/pci/host/pcie-iproc.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
