This patch adds disscramble quirk, and it only needs to be enabled at fpga board on some vendor platforms. Signed-off-by: Huang Rui <ray.huang@xxxxxxx> --- drivers/usb/dwc3/core.c | 14 +++++++++++++- drivers/usb/dwc3/core.h | 3 +++ drivers/usb/dwc3/platform_data.h | 2 ++ 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ddac372..c320835 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -422,7 +422,6 @@ static int dwc3_core_init(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; - reg &= ~DWC3_GCTL_DISSCRAMBLE; switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: @@ -461,6 +460,14 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->is_fpga = true; } + WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga, + "disable_scramble cannot be used on non-FPGA builds\n"); + + if (dwc->disable_scramble_quirk && dwc->is_fpga) + reg |= DWC3_GCTL_DISSCRAMBLE; + else + reg &= ~DWC3_GCTL_DISSCRAMBLE; + /* * WORKAROUND: DWC3 revisions <1.90a have a bug * where the device can fail to connect at SuperSpeed @@ -705,11 +712,16 @@ static int dwc3_probe(struct platform_device *pdev) dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize"); dwc->dr_mode = of_usb_get_dr_mode(node); + + dwc->disable_scramble_quirk = of_property_read_bool(node, + "snps,disable_scramble_quirk"); } else if (pdata) { dwc->maximum_speed = pdata->maximum_speed; dwc->needs_fifo_resize = pdata->tx_fifo_resize; dwc->dr_mode = pdata->dr_mode; + + dwc->disable_scramble_quirk = pdata->disable_scramble_quirk; } /* default to superspeed if no maximum_speed passed */ diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index f6ee623..56bada6 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -672,6 +672,7 @@ struct dwc3_scratchpad_array { * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @start_config_issued: true when StartConfig command has been issued * @three_stage_setup: set if we perform a three phase setup + * @disable_scramble_quirk: set if we enable the disable scramble quirk */ struct dwc3 { struct usb_ctrlrequest *ctrl_req; @@ -776,6 +777,8 @@ struct dwc3 { unsigned setup_packet_pending:1; unsigned start_config_issued:1; unsigned three_stage_setup:1; + + unsigned disable_scramble_quirk:1; }; /* -------------------------------------------------------------------------- */ diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h index 7db34f0..9209d02 100644 --- a/drivers/usb/dwc3/platform_data.h +++ b/drivers/usb/dwc3/platform_data.h @@ -24,4 +24,6 @@ struct dwc3_platform_data { enum usb_device_speed maximum_speed; enum usb_dr_mode dr_mode; bool tx_fifo_resize; + + unsigned disable_scramble_quirk:1; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html