Hi Prarit,
On Wed, Oct 15, 2014 at 1:05 PM, Prarit Bhargava <prarit@xxxxxxxxxx> wrote:
> Consider a multi-node, multiple pci root bridge system which can be
> configured into one large node or one node/socket. When configuring the
> system the numa_node value for each PCI root bridge is always set
> incorrectly to -1, or NUMA_NO_NODE, rather than to the node value of each
> socket. Each PCI device inherits the numa value directly from it's parent
> device, so that the NUMA_NO_NODE value is passed through the entire PCI
> tree.
>
> Some new drivers, such as the Intel QAT driver, drivers/crypto/qat,
> require that a specific node be assigned to the device in order to
> achieve maximum performance for the device, and will fail to load if the
> device has NUMA_NO_NODE.
It seems ... unfriendly for a driver to fail to load just because it
can't guarantee maximum performance. Out of curiosity, where does
this actually happen? I had a quick look for NUMA_NO_NODE and
module_init() functions in drivers/crypto/qat, and I didn't see the
spot.
> The driver would load if the numa_node value
> was equal to or greater than -1 and quickly hacking the driver results in
> a functional QAT driver.
>
> Using lspci and numactl it is easy to determine what the numa value should
> be. The problem is that there is no way to set it. This patch adds a
> store function for the PCI device's numa_node value.
I'm not familiar with numactl. It sounds like it can show you the
NUMA topology? Where does that information come from?
> To use this, one can do
>
> echo 3 > /sys/devices/pci0000:ff/0000:ff:1f.3/numa_node
>
> to set the numa node for PCI device 0000:ff:1f.3.
It definitely seems wrong that we don't set the node number correctly.
pci_acpi_scan_root() sets the node number by looking for a _PXM method
that applies to the host bridge. Why does that not work in this case?
Does the BIOS not supply _PXM?
If there's information that numactl uses, maybe the kernel should use that, too?
A sysfs interface might be a useful workaround, but obviously it would
be far better if we could fix the BIOS and/or kernel so the workaround
isn't necessary in the first place.
Bjorn
> Cc: Myron Stowe <mstowe@xxxxxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx
> Signed-off-by: Prarit Bhargava <prarit@xxxxxxxxxx>
> ---
> drivers/pci/pci-sysfs.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 92b6d9a..c05ed30 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -221,12 +221,33 @@ static ssize_t enabled_show(struct device *dev, struct device_attribute *attr,
> static DEVICE_ATTR_RW(enabled);
>
> #ifdef CONFIG_NUMA
> +static ssize_t numa_node_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + int node, ret;
> +
> + if (!capable(CAP_SYS_ADMIN))
> + return -EPERM;
> +
> + ret = kstrtoint(buf, 0, &node);
> + if (ret)
> + return ret;
> +
> + if (!node_online(node))
> + return -EINVAL;
> +
> + dev->numa_node = node;
> +
> + return count;
> +}
> +
> static ssize_t numa_node_show(struct device *dev, struct device_attribute *attr,
> char *buf)
> {
> return sprintf(buf, "%d\n", dev->numa_node);
> }
> -static DEVICE_ATTR_RO(numa_node);
> +static DEVICE_ATTR_RW(numa_node);
> #endif
>
> static ssize_t dma_mask_bits_show(struct device *dev,
> --
> 1.7.9.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
