Main changes since the v4: 1. add gpio controlled regulator for pcie on imx6sx sdb board. 2. in order to not break compilation, move designware modifications, before imx6 pcie changes. 3. remove "PCI: imx6: Fix possible dead lock" from this series. 4. rename the pcie phy regulator from "pcie_regulator" to "pcie_phy_regulator". [PATCH v5 1/9] PCI: designware: refine setup_rc and add msi data [PATCH v5 2/9] PCI: designware: fix one potential assignment error of [PATCH v5 3/9] PCI: imx6: wait the clocks to stabilize after ref_en [PATCH v5 4/9] PCI: imx6: add imx6sx pcie support [PATCH v5 5/9] ARM: imx6qdl: enable pcie on imx6qdl sabreauto [PATCH v5 6/9] ARM: imx6: update dts and binding for imx6sx pcie [PATCH v5 7/9] ARM: imx6sx: add syscon into gpc dts [PATCH v5 8/9] ARM: imx6sx: add imx6sx pcie related gpr bits [PATCH v5 9/9] ARM: imx6sx: enable pcie on imx6sx sdb board -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
