Re: [PATCH V7 00/17] Enable SRIOV on POWER8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 02, 2014 at 09:59:43AM -0600, Bjorn Helgaas wrote:
>On Wed, Aug 20, 2014 at 11:35:46AM +0800, Wei Yang wrote:
>> On Tue, Aug 19, 2014 at 10:12:27PM -0500, Bjorn Helgaas wrote:
>> >On Tue, Aug 19, 2014 at 9:34 PM, Wei Yang <weiyang@xxxxxxxxxxxxxxxxxx> wrote:
>> >> On Tue, Aug 19, 2014 at 03:19:42PM -0600, Bjorn Helgaas wrote:
>> >>>On Thu, Jul 24, 2014 at 02:22:10PM +0800, Wei Yang wrote:
>> >>>> This patch set enables the SRIOV on POWER8.
>> >>>>
>> >>>> The gerneral idea is put each VF into one individual PE and allocate required
>> >>>> resources like DMA/MSI.
>> >>>>
>> >>>> One thing special for VF PE is we use M64BT to cover the IOV BAR. M64BT is one
>> >>>> hardware on POWER platform to map MMIO address to PE. By using M64BT, we could
>> >>>> map one individual VF to a VF PE, which introduce more flexiblity to users.
>> >>>>
>> >>>> To achieve this effect, we need to do some hack on pci devices's resources.
>> >>>> 1. Expand the IOV BAR properly.
>> >>>>    Done by pnv_pci_ioda_fixup_iov_resources().
>> >>>> 2. Shift the IOV BAR properly.
>> >>>>    Done by pnv_pci_vf_resource_shift().
>> >>>> 3. IOV BAR alignment is the total size instead of an individual size on
>> >>>>    powernv platform.
>> >>>>    Done by pnv_pcibios_sriov_resource_alignment().
>> >>>> 4. Take the IOV BAR alignment into consideration in the sizing and assigning.
>> >>>>    This is achieved by commit: "PCI: Take additional IOV BAR alignment in
>> >>>>    sizing and assigning"
>> >>>>
>> >>>> Test Environment:
>> >>>>        The SRIOV device tested is Emulex Lancer and Mellanox ConnectX-3 on
>> >>>>        POWER8.
>> >>>>
>> >>>> Examples on pass through a VF to guest through vfio:
>> >>>>      1. install necessary modules
>> >>>>         modprobe vfio
>> >>>>         modprobe vfio-pci
>> >>>>      2. retrieve the iommu_group the device belongs to
>> >>>>         readlink /sys/bus/pci/devices/0000:06:0d.0/iommu_group
>> >>>>         ../../../../kernel/iommu_groups/26
>> >>>>         This means it belongs to group 26
>> >>>>      3. see how many devices under this iommu_group
>> >>>>         ls /sys/kernel/iommu_groups/26/devices/
>> >>>>      4. unbind the original driver and bind to vfio-pci driver
>> >>>>         echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind
>> >>>>         echo  1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id
>> >>>>         Note: this should be done for each device in the same iommu_group
>> >>>>      5. Start qemu and pass device through vfio
>> >>>>         /home/ywywyang/git/qemu-impreza/ppc64-softmmu/qemu-system-ppc64 \
>> >>>>                 -M pseries -m 2048 -enable-kvm -nographic \
>> >>>>                 -drive file=/home/ywywyang/kvm/fc19.img \
>> >>>>                 -monitor telnet:localhost:5435,server,nowait -boot cd \
>> >>>>                 -device "spapr-pci-vfio-host-bridge,id=CXGB3,iommu=26,index=6"
>> >>>>
>> >>>> Verify this is the exact VF response:
>> >>>>      1. ping from a machine in the same subnet(the broadcast domain)
>> >>>>      2. run arp -n on this machine
>> >>>>         9.115.251.20             ether   00:00:c9:df:ed:bf   C eth0
>> >>>>      3. ifconfig in the guest
>> >>>>         # ifconfig eth1
>> >>>>         eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>> >>>>              inet 9.115.251.20  netmask 255.255.255.0  broadcast 9.115.251.255
>> >>>>              inet6 fe80::200:c9ff:fedf:edbf  prefixlen 64  scopeid 0x20<link>
>> >>>>              ether 00:00:c9:df:ed:bf  txqueuelen 1000 (Ethernet)
>> >>>>              RX packets 175  bytes 13278 (12.9 KiB)
>> >>>>              RX errors 0  dropped 0  overruns 0  frame 0
>> >>>>              TX packets 58  bytes 9276 (9.0 KiB)
>> >>>>              TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
>> >>>>      4. They have the same MAC address
>> >>>>
>> >>>>      Note: make sure you shutdown other network interfaces in guest.
>> >>>>
>> >>>> ---
>> >>>> v6 -> v7:
>> >>>>    1. add IORESOURCE_ARCH flag for IOV BAR on powernv platform.
>> >>>>    2. when IOV BAR has IORESOURCE_ARCH flag, the size is retrieved from
>> >>>>       hardware directly. If not, calculate as usual.
>> >>>>    3. reorder the patch set, group them by subsystem:
>> >>>>       PCI, powerpc, powernv
>> >>>>    4. rebase it on 3.16-rc6
>> >>>
>> >>>This doesn't apply for me on v3.16-rc6:
>> >>>
>> >>>  02:48:57 ~/linux$ stg rebase v3.16-rc6
>> >>>  Checking for changes in the working directory ... done
>> >>>  Rebasing to "v3.16-rc6" ... done
>> >>>  No patches applied
>> >>>  02:49:14 ~/linux$ stg import -M --sign m/wy
>> >>>  Checking for changes in the working directory ... done
>> >>>  Importing patch "pci-iov-export-interface-for" ... done
>> >>>  Importing patch "pci-iov-get-vf-bar-size-from" ... done
>> >>>  Importing patch "pci-add-weak" ... done
>> >>>  Importing patch "pci-take-additional-iov-bar" ... done
>> >>>  Importing patch "powerpc-pci-don-t-unset-pci" ... done
>> >>>  Importing patch "powerpc-pci-define" ... done
>> >>>  Importing patch "powrepc-pci-refactor-pci_dn" ... done
>> >>>  Importing patch "powerpc-powernv-use-pci_dn-in" ... error: patch failed:
>> >>>  arch/powerpc/platforms/powernv/pci.c:376
>> >>>  error: arch/powerpc/platforms/powernv/pci.c: patch does not apply
>> >>>  stg import: Diff does not apply cleanly
>> >>>
>> >>>What am I missing?
>> >>>
>> >>>I assume you intend these all to go through my tree just to keep them all
>> >>>together.  The ideal rebase target for me would be v3.17-rc1.
>> >>
>> >> Ok, I will rebase it on v3.17-rc1 upstream. While I guess the conflict is due
>> >> to some patches from Gavin, which is not merged at that moment. I will make
>> >> sure it applies to v3.17-rc1.
>> >
>> >I tried applying them on v3.16-rc6 as well as on every change to
>> >arch/powerpc/platforms/powernv/pci.c between v3.16-rc6 and v3.17-rc1,
>> >and none applied cleanly.  Patches you post should be based on some
>> >upstream tag, not on something that includes unmerged patches.
>> 
>> Sorry about this, I will pay attention to this next time.
>
>I haven't seen any more on this series, and I'm assuming you'll post a
>rebased series (maybe you're waiting for v3.18-rc1?).  I'm just checking to
>make sure you're not waiting for something from me...
>

Wei Yang is on vacation and he might not see your reply and response in time.
As discussed with Wei Yang offline, he was waiting for 3.18.rc1 to rebase and
send a new version out for comments.

Thanks,
Gavin

>Bjorn
>

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux