On Thu, Sep 18, 2014 at 02:56:58PM -0500, Aravind Gopalakrishnan wrote:
> F15hM60h adds support for DDR4 and DDR3 LRDIMMS. Adding them here.
>
> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@xxxxxxx>
> ---
> drivers/edac/edac_mc.c | 3 +++
> include/linux/edac.h | 2 ++
> 2 files changed, 5 insertions(+)
>
> diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
> index 9f134823..71fd9fb 100644
> --- a/drivers/edac/edac_mc.c
> +++ b/drivers/edac/edac_mc.c
> @@ -146,6 +146,9 @@ const char *edac_mem_types[] = {
> "Rambus XDR",
> "Unbuffered DDR3 RAM",
> "Registered DDR3 RAM",
> + "Load-Reduce DDR3 RAM",
Renamed it to "Load-Reduced DDR3 RAM" while applying.
Also, applied the following cleanup ontop:
---
From: Borislav Petkov <bp@xxxxxxx>
Subject: [PATCH] EDAC: Sync memory types and names
Make keeping the sync between the mem_types enum and the actual string
names simpler by using designated initializers.
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
---
drivers/edac/edac_mc.c | 43 ++++++++++++++++++++-----------------------
1 file changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 129ff9c36a78..1747906f10ce 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -125,30 +125,27 @@ static void edac_mc_dump_mci(struct mem_ctl_info *mci)
#endif /* CONFIG_EDAC_DEBUG */
-/*
- * keep those in sync with the enum mem_type
- */
const char * const edac_mem_types[] = {
- "Empty csrow",
- "Reserved csrow type",
- "Unknown csrow type",
- "Fast page mode RAM",
- "Extended data out RAM",
- "Burst Extended data out RAM",
- "Single data rate SDRAM",
- "Registered single data rate SDRAM",
- "Double data rate SDRAM",
- "Registered Double data rate SDRAM",
- "Rambus DRAM",
- "Unbuffered DDR2 RAM",
- "Fully buffered DDR2",
- "Registered DDR2 RAM",
- "Rambus XDR",
- "Unbuffered DDR3 RAM",
- "Registered DDR3 RAM",
- "Load-Reduced DDR3 RAM",
- "Unbuffered DDR4 RAM",
- "Registered DDR4 RAM",
+ [MEM_EMPTY] = "Empty csrow",
+ [MEM_RESERVED] = "Reserved csrow type",
+ [MEM_UNKNOWN] = "Unknown csrow type",
+ [MEM_FPM] = "Fast page mode RAM",
+ [MEM_EDO] = "Extended data out RAM",
+ [MEM_BEDO] = "Burst Extended data out RAM",
+ [MEM_SDR] = "Single data rate SDRAM",
+ [MEM_RDR] = "Registered single data rate SDRAM",
+ [MEM_DDR] = "Double data rate SDRAM",
+ [MEM_RDDR] = "Registered Double data rate SDRAM",
+ [MEM_RMBS] = "Rambus DRAM",
+ [MEM_DDR2] = "Unbuffered DDR2 RAM",
+ [MEM_FB_DDR2] = "Fully buffered DDR2",
+ [MEM_RDDR2] = "Registered DDR2 RAM",
+ [MEM_XDR] = "Rambus XDR",
+ [MEM_DDR3] = "Unbuffered DDR3 RAM",
+ [MEM_RDDR3] = "Registered DDR3 RAM",
+ [MEM_LRDDR3] = "Load-Reduced DDR3 RAM",
+ [MEM_DDR4] = "Unbuffered DDR4 RAM",
+ [MEM_RDDR4] = "Registered DDR4 RAM",
};
EXPORT_SYMBOL_GPL(edac_mem_types);
--
2.0.0
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
