On Fri, Sep 12, 2014 at 10:07:16PM -0600, Bjorn Helgaas wrote: > I want to fix this regression before v3.17. Dirk, can you test the > following patch on top of v3.17-rc2? I'm hoping you can try this on your > test machine in conjunction with your acpi_pci_root_add() and > pci_scan_device() patches. If I understand correctly, you were able to > reproduce the FC adapter not showing up, and if you can verify that it does > show with those patches + this revert, I think that's good enough for now. > > I'm not committed to applying this yet, but I'd like to have a working fix > in my back pocket in case we don't come up with a better solution soon. Since Dirk confirmed that the revert below avoids the problem for now, I applied it to my for-linus branch for v3.17. I don't think this is the right fix, but it will buy us some time to figure out a better fix after v3.17. Bjorn > commit 5945a8d28c416fc390a94c8e7fb8fd0a76f5d710 > Author: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > Date: Fri Sep 12 21:58:19 2014 -0600 > > Revert "PCI: Make sure bus number resources stay within their parents bounds" > > This reverts commit 1820ffdccb9b ("PCI: Make sure bus number resources stay > within their parents bounds") because it breaks some systems with LSI Logic > FC949ES Fibre Channel Adapters, apparently by exposing a defect in those > adapters. > > Dirk tested a Tyan VX50 (B4985) with this device that worked like this > prior to 1820ffdccb9b: > > bus: [bus 00-7f] on node 0 link 1 > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) > pci 0000:00:0e.0: PCI bridge to [bus 0a] > pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus 00-07] (conflicts with (null) [bus 00-07]) > pci 0000:0a:00.0: [1000:0646] type 00 class 0x0c0400 (FC adapter) > > Note that the root bridge [bus 00-07] aperture is wrong; this is a BIOS > defect in the PCI0 _CRS method. But prior to 1820ffdccb9b, we didn't > enforce that aperture, and the FC adapter worked fine at 0a:00.0. > > After 1820ffdccb9b, we notice that 00:0e.0's aperture is not contained in > the root bridge's aperture, so we reconfigure it so it *is* contained: > > pci 0000:00:0e.0: bridge configuration invalid ([bus 0a-0a]), reconfiguring > pci 0000:00:0e.0: PCI bridge to [bus 06-07] > > This effectively moves the FC device from 0a:00.0 to 07:00.0, which should > be legal. But when we enumerate bus 06, the FC device doesn't respond, so > we don't find anything. This is probably a defect in the FC device. > > Possible fixes (due to Yinghai): > > 1) Add a quirk to fix the _CRS information based on what amd_bus.c read > from the hardware > > 2) Reset the FC device after we change its bus number > > 3) Revert 1820ffdccb9b > > Fix 1 would be relatively easy, but it does sweep the LSI FC issue under > the rug. We might want to reconfigure bus numbers in the future for some > other reason, e.g., hotplug, and then we could trip over this again. > > For that reason, I like fix 2, but we don't know whether it actually works, > and we don't have a patch for it yet. > > This revert is fix 3, which also sweeps the LSI FC issue under the rug. > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=84281 > Reported-by: Dirk Gouders <dirk@xxxxxxxxxxx> > Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > CC: stable@xxxxxxxxxxxxxxx # v3.15+ > CC: Yinghai Lu <yinghai@xxxxxxxxxx> > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index e3cf8a2e6292..f0badff77cff 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -775,7 +775,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) > /* Check if setup is sensible at all */ > if (!pass && > (primary != bus->number || secondary <= bus->number || > - secondary > subordinate || subordinate > bus->busn_res.end)) { > + secondary > subordinate)) { > dev_info(&dev->dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n", > secondary, subordinate); > broken = 1; > @@ -853,8 +853,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) > child = pci_add_new_bus(bus, dev, max+1); > if (!child) > goto out; > - pci_bus_insert_busn_res(child, max+1, > - bus->busn_res.end); > + pci_bus_insert_busn_res(child, max+1, 0xff); > } > max++; > buses = (buses & 0xff000000) > @@ -913,11 +912,6 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) > /* > * Set the subordinate bus number to its real value. > */ > - if (max > bus->busn_res.end) { > - dev_warn(&dev->dev, "max busn %02x is outside %pR\n", > - max, &bus->busn_res); > - max = bus->busn_res.end; > - } > pci_bus_update_busn_res_end(child, max); > pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); > } -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html