On 9/8/2014 8:54 AM, Liviu Dudau wrote:
If the firmware has not assigned all the bus resources and
we are not just probing the PCIe busses, it makes sense to
assign the unassigned resources in pci_scan_root_bus().
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
---
drivers/pci/probe.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ef891d2..508cf61 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
if (!found)
pci_bus_update_busn_res_end(b, max);
+ if (!pci_has_flag(PCI_PROBE_ONLY))
+ pci_assign_unassigned_bus_resources(b);
+
pci_bus_add_devices(b);
return b;
}
Liviu,
Besides the check for PCI_PROBE_ONLY here, I think we also need to avoid calling
"pci_enable_resources()" in the "driver/pci/pci.c: pcibios_enable_device()" for
PCI_PROBE_ONLY mode since the resource is not assigned by Linux. Otherwise, the
"drivers/pci/setup-res.c: pci_enable_resource()" would fail w/ error:
can't enable device: BAR ..... not assigned
Actually, in "arch/arm/kernel/bios32.c:", the weak "pcibios_enable_device()" function
also has the check for PCI_PROBE_ONLY mode before calling pci_enable_resources().
Thanks,
Suravee
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
