From: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
This patch set introduces support for MSI(-X) in GICv2m specification,
which is implemented in some variation of GIC400.
This depends on and has been tested with the following patch set which
implements PCI supports for ARM64:
* https://lkml.org/lkml/2014/8/12/394
* https://lkml.org/lkml/2014/8/12/361
Changes in V5:
* Rebase to git://git.infradead.org/users/jcooper/linux.git irqchip/core
Marc Zyngier suggestions:
* Only use GICv2m irq_chip for MSI interrupts.
* Simplify logic to support multi-MSI in arch/arm64/kernel/msi.c.
* Modify gicv2m_setup_msi_irq() to also handle multi-MSI.
Mark Rutlan suggestions:
* V4 patch set did not support multiple MSI register frame within a GIC.
Although, the proposed GICv2m device tree binding should be able to
handle the case. Mark was questioning on how we can properly handle
this in the code. Therefore, I try to implement this by iterating through
the subnodes and look for msi-controller property. Once found, the code
parses v2m register frame information and store it in the v2m_list of
each gic_chip_data.
Jingoo han suggestions:
* Misc clean up.
Suravee Suthikulpanit (2):
irqchip: gic: Add supports for ARM GICv2m MSI(-X)
irqchip: gicv2m: Add support for multiple MSI for ARM64 GICv2m
Documentation/devicetree/bindings/arm/gic.txt | 39 +++
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/msi.c | 41 ++++
drivers/irqchip/Kconfig | 7 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-gic-v2m.c | 326 ++++++++++++++++++++++++++
drivers/irqchip/irq-gic.c | 88 ++++---
drivers/irqchip/irq-gic.h | 51 ++++
8 files changed, 526 insertions(+), 28 deletions(-)
create mode 100644 arch/arm64/kernel/msi.c
create mode 100644 drivers/irqchip/irq-gic-v2m.c
create mode 100644 drivers/irqchip/irq-gic.h
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
