Re: [PATCH v2] pci/probe: Enable CRS for root port if it is supported

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 02, 2014 at 04:26:00PM -0700, Rajat Jain wrote:
> 
> As per the PCIe spec, an endpoint may return the configuration cycles
> with CRS if it is not yet fully ready to be accessed. If the CRS visibility
> is not enabled at the root port, the spec leaves the retry behaviour open
> to implementation in such a case. The Intel root ports have chosen to retry
> endlessly in this situation. Thus, the root controller may "hang" (repeatedly
> retrying the configuration requests until it gets a status other than CRS) if
> a device returns CRS for a long time. This can cause a broken endpoint to bring
> down the whole PCI hierarchy.
> 
> This was recently known to cause problems on Intel systems and
> was discussed here:
> http://marc.info/?t=140926298500002&r=1&w=2
> 
> Ref1:
> https://www.pcisig.com/specifications/pciexpress/ECN_CRS_Software_Visibility_No27.pdf
> 
> Ref2:
> PCIe spec V3.0, pg119, pg127 for "Configuration Request Retry Status"
> 
> Thus enable the CRS visibility for the root ports that support it. This
> patch reverts the following commit, but enables CRS visibility only
> when the root port supports it:
> 
> ad7edfe04908 ("[PCI] Do not enable CRS Software Visibility by default")
> 
> (Linus' response: http://marc.info/?l=linux-pci&m=140968622520192&w=2)
> 
> Signed-off-by: Rajat Jain <rajatxjain@xxxxxxxxx>
> Signed-off-by: Rajat Jain <rajatjain@xxxxxxxxxxx>
> Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxx>

I put this and the "only look at Vendor ID" patch on a pci/enumeration
branch [1].  I rewrote the changelogs to reflect my understanding of what's
going on, so probably the real truth is somewhere between your original and
mine.  Let me know what should be fixed.

We should figure out an easy way for Josh to test these.  Ideally, he could
test the second patch by itself first, then both together.

[1] https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/enumeration

> ---
> v2: Remove the white list, that was enabling the CRS for certain known Intel systems.
>     Rather now enable it for all systems that support this capability.
> v1: Enable CRS for only some given Intel systems (maintain a whitelist)
> 
>  drivers/pci/probe.c           |   13 +++++++++++++
>  include/uapi/linux/pci_regs.h |    1 +
>  2 files changed, 14 insertions(+)
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index e3cf8a2..3c4c35c 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -740,6 +740,17 @@ struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
>  }
>  EXPORT_SYMBOL(pci_add_new_bus);
>  
> +static void pci_enable_crs(struct pci_dev *pdev)
> +{
> +	u16 root_cap = 0;
> +
> +	/* Enable CRS Software visibility if supported */
> +	pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap);
> +	if (root_cap & PCI_EXP_RTCAP_CRSVIS)
> +		pcie_capability_set_word(pdev, PCI_EXP_RTCTL,
> +					 PCI_EXP_RTCTL_CRSSVE);
> +}
> +
>  /*
>   * If it's a bridge, configure it and scan the bus behind it.
>   * For CardBus bridges, we don't scan behind as the devices will
> @@ -787,6 +798,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
>  	pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
>  			      bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
>  
> +	pci_enable_crs(dev);
> +
>  	if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
>  	    !is_cardbus && !broken) {
>  		unsigned int cmax;
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index 30db069..a75106d 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -552,6 +552,7 @@
>  #define  PCI_EXP_RTCTL_PMEIE	0x0008	/* PME Interrupt Enable */
>  #define  PCI_EXP_RTCTL_CRSSVE	0x0010	/* CRS Software Visibility Enable */
>  #define PCI_EXP_RTCAP		30	/* Root Capabilities */
> +#define  PCI_EXP_RTCAP_CRSVIS	0x0001	/* CRS software visibility capability */
>  #define PCI_EXP_RTSTA		32	/* Root Status */
>  #define PCI_EXP_RTSTA_PME	0x00010000 /* PME status */
>  #define PCI_EXP_RTSTA_PENDING	0x00020000 /* PME pending */
> -- 
> 1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux