On 07/18/2014 11:14 AM, Murali Karicheri wrote:
This patch series add PCIe controller driver for keystone SoCs. This is
based on v4 of the series posted to the mailing list. Keystone PCI controller
is based on version 3.65 of the DW hardware. This driver uses the DW core
functions to implement the PCI controller driver for keystone.
Testing:
=======
Testing of the driver is done on TI's K2HK EVM inserted to a Elma blu!eco
MicroTCA chassis AMC slot with JumpGen SEM-200 AMC SATA Storage and Dual
Ethernet Card Express inserted on another AMC slot. The e1000e driver available
on intel's website is patched to the kernel source tree and build. e1000e.ko
is dynamically loaded and executed ping and iperf tests to test the
functionality.
Thanks to all of you who have contributed by reviewing and offering valuable
comments. If you want me to add your "Reviewed-by", please let me know so that
I can add it to the commit log and re-send. Patch 1-3 has Acks from maintainers
and I believe this can be merged to upstream branch. Patch 4 is waiting for
Ack from DT maintainer. Please provide the same at the earliest.
Thanks
Signed-off-by: Murali Karicheri<m-karicheri2@xxxxxx>
CC: Russell King<linux@xxxxxxxxxxxxxxxx>
CC: Grant Likely<grant.likely@xxxxxxxxxx>
CC: Rob Herring<robh+dt@xxxxxxxxxx>
CC: Mohit Kumar<mohit.kumar@xxxxxx>
CC: Jingoo Han<jg1.han@xxxxxxxxxxx>
CC: Bjorn Helgaas<bhelgaas@xxxxxxxxxx>
CC: Pratyush Anand<pratyush.anand@xxxxxx>
CC: Richard Zhu<r65037@xxxxxxxxxxxxx>
CC: Kishon Vijay Abraham I<kishon@xxxxxx>
CC: Marek Vasut<marex@xxxxxxx>
CC: Arnd Bergmann<arnd@xxxxxxxx>
CC: Pawel Moll<pawel.moll@xxxxxxx>
CC: Mark Rutland<mark.rutland@xxxxxxx>
CC: Ian Campbell<ijc+devicetree@xxxxxxxxxxxxxx>
CC: Kumar Gala<galak@xxxxxxxxxxxxxx>
CC: Randy Dunlap<rdunlap@xxxxxxxxxxxxx>
CC: Grant Likely<grant.likely@xxxxxxxxxx>
Changelog:
v6
- Added Ack from Maintainer for patch 3. Patch 1-3 now have the
Acks from maintainer and can be merged to upstream branch.
Patch 4 is waiting ack from DT maintainer.
v5
- Rebased to upstream kernel v3.16-rc5
- Reworked Patch 3/6 and 4/6 into a single patch based on
maintainer comment to use a API callback model to support
the v3.65 h/w.
v4
- Addressed comments against 5/5.
- Added a patch 6/6 for Maintainer information
- Added couple of Acked-By:
- Rebased to latest Linux 3.16-rc4
v3
- DW application register handling code is now part of
Keystone PCI driver. RFC had this code part of Keystone
PCI driver, then V1 moved this to a separate file to
re-use on other platforms that uses this version of the
DW h/w. Then based on comments against v2, this is moved
back to Keystone driver.
- Keystone SerDes phy driver is removed from this series so that
this can be merged independent of that patch
- added msi_set_irq()/clear_irq() API's to support Keystone
V2
- Split the designware pcie enhancement patch to multiple
patches based on functionality added
- Remove the quirk code and add a patch to fix mps/mrss
tuning for ARM. Use kernel command line parameter
pci=pcie_bus_perf to work with Keystone PCI Controller.
Following patch addressed this.
[PATCH v1] ARM: pci: add call to pcie_bus_configure_settings()
- Add documentation for device tree bindings
- Add separate interrupt controller nodes for MSI and Legacy
IRQs and use irq map for legacy IRQ
- Use compatibility to identify v3.65 version of the DW hardware
and use it to customize the designware common code.
- Use reg property for configuration space instead of range
- Other minor updates based on code inspection.
V1
- Add an interrupt controller node for Legacy irq chip and use
interrupt map/map-mask property to map legacy IRQs A/B/C/D
- Add a Phy driver to replace the original serdes driver
- Move common application register handling code to a separate
file to allow re-use across other platforms that use older
DW PCIe h/w
- PCI quirk for maximum read request size. Check and override only
if the maximum is higher than what controller can handle.
- Converted to a module platform driver.
Murali Karicheri (5):
PCI: designware: add rd[wr]_other_conf API
PCI: designware: refactor MSI code to work with v3.65 dw hardware
PCI: designware: enhance dw_pcie_host_init() to support v3.65 DW
hardware
PCI: add PCI controller for keystone PCIe h/w
PCI: keystone: Update maintainer information
.../devicetree/bindings/pci/pci-keystone.txt | 71 +++
MAINTAINERS | 7 +
drivers/pci/host/Kconfig | 5 +
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pci-keystone-dw.c | 516 ++++++++++++++++++++
drivers/pci/host/pci-keystone.c | 385 +++++++++++++++
drivers/pci/host/pci-keystone.h | 59 +++
drivers/pci/host/pcie-designware.c | 116 +++--
drivers/pci/host/pcie-designware.h | 9 +
9 files changed, 1133 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/pci-keystone.txt
create mode 100644 drivers/pci/host/pci-keystone-dw.c
create mode 100644 drivers/pci/host/pci-keystone.c
create mode 100644 drivers/pci/host/pci-keystone.h
Bjorn,
I still don't have Ack from DT maintainer against 4/5 and I have send
few reminders already and waiting. I have copied Rob to this email. Is
there anyone else to be Acked for the DT part? Otherwise, it is ready to
be merged. Let me know how it goes.
Thanks
Murali
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
