On Thu, Jul 17, 2014 at 12:38:04AM +0800, Murali Karicheri wrote:
> keystone PCI controller is based on v3.65 designware hardware. This
> version differs from newer versions of the hardware in few functional
> areas discussed below that makes it necessary to change dw_pcie_host_init()
> to support v3.65 based PCI controller.
>
> 1. No support for ATU port. So any ATU specific resource handling code
> is to be bypassed for v3.65 h/w.
> 2. MSI controller uses Application space to implement MSI and 32 MSI
> interrupts are multiplexed over 8 IRQs to the host. Hence the code
> to process MSI IRQ needs to be different. This patch allows platform
> driver to provide its own irq_domain_ops ptr to irq_domain_add_linear()
> through an API callback from the designware core driver.
> 3. MSI interrupt generation requires EP to write to the RC's application
> register. So enhance the driver to allow setup of inbound access to
> MSI irq register as a post scan bus API callback.
>
> Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
Looks almost ok to me.
Reviewed-by: Pratyush Anand <pratyush.anand@xxxxxx>
> int __init dw_pcie_host_init(struct pcie_port *pp)
> {
> struct device_node *np = pp->dev->of_node;
> - struct of_pci_range range;
> struct of_pci_range_parser parser;
> + struct of_pci_range range;
You may avoid moving the above line.
~Pratyush
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
