Hi Arnd, Any update on status of this patchset? Is it OK for it to go through arm-soc tree or should it be splitted into separate parts which would go through pci/phy/arm-soc trees? [ The patchset applies fine to next-20140707 after fixing trivial reject in drivers/pci/host/Makefile in patch #8. To make it build the following line from patch #8 needs to be dropped: + spin_lock_init(&pp->conf_lock); ] Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics On Thursday, May 22, 2014 05:01:19 PM Pratyush Anand wrote: > Hi Arnd/Bjorn, > > On Mon, May 19, 2014 at 07:55:12PM +0800, Mohit KUMAR wrote: > > Hello Arnd, > > > > > -----Original Message----- > > > From: Mohit KUMAR DCG > > > Sent: Tuesday, April 15, 2014 5:20 PM > > > To: spear-devel; linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; > > > linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > > Cc: Mohit KUMAR DCG > > > Subject: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support > > > > > > Patch# 1 and 2: Improvement and fixes for SPEAr13xx support. > > > Patch# 3,4 and 6: Add DT bindings for spear1310/40-miphy, misc and pcie > > > node Patch# 5: Add spear1310/40-miphy driver and support for spear1310/40 > > > miphy wrapper. > > > Patch# 7-9: Add SPEAr13xx PCIe driver and dt support. > > > > > > These pathes are tested with linux-3.15 tag of arm-soc tree. > > > Tested with SPEAr1310 evaluation board with: > > > - INTEL PRO 100/100 EP card > > > - USB xhci gen2 card > > > - Above cards connected through LeCROY PTC switch > > > > > > Modifications for SATA are tested with SPEAr1340-evb board > > > > > > > I think 3.16 windows is about to close, are you planning to merge this series? > > Pls let me know if something pending on our part. > > If you could let us know the status of this patch series inclusion. > > Regards > Pratyush > > > > > Regards > > Mohit > > > > > Changes since v7: > > > - Rebase over for-linus-3.15 tag of arm-soc tree so that complete patch series > > > can be applied cleanly. > > > - Incorporated few comments on comment style and superfluous comments > > > Changes since v6: > > > - Split miphy driver for SPEAr1310 and SPEAr1340 > > > - Some cleanup and incorporated other minor comments Changes since v5: > > > - Split DT bindings for misc, miphy-40lp and pcie node into sepearte patches > > > - Merge config options PCIE_SPEAR13XX and PCI_MSI into defconfig patch > > > - Incorporated other minor comments > > > Changes since v4: > > > - Uses per device function pointers passed from .data field to > > > the of_device_id instead of of_device_is_compatible. > > > - Incorporated other minor comments from v4 > > > > > > Changes since v3: > > > - Phy driver renamed to phy-miphy40lp > > > - ahci phy hook patch used as suggested by Arnd > > > - Incorporated other minor comments from v3 > > > > > > Changes since v2: > > > - Incorporated comments to move SPEAr13xx PCIe and SATA phy specific > > > routines to > > > the phy framework > > > - Modify ahci driver to include phy hooks > > > - phy-core driver modifications for subsys_initcall() > > > > > > Changes since v1: > > > - Few patches of the series are already accepted and applied to mainline e.g. > > > pcie designware driver improvements,fixes for IO translation bug, PCIe dw > > > driver maintainer. So dropped these from v2. > > > - Incorporated comment to move the common/reset PCIe code to the > > > seperate driver > > > - PCIe and SATA share common PHY configuration registers, so move SATA > > > platform code to the system config driver Fourth patch is improves pcie > > > designware driver and fixes the IO translation bug. IO translation bug fix > > > leads to the working of PCIe EP devices connected to RC through switch. > > > > > > Mohit Kumar (1): > > > SPEAr13xx: defconfig: Update > > > > > > Pratyush Anand (8): > > > clk: SPEAr13XX: Fix pcie clock name > > > SPEAr13XX: Fix static mapping table > > > phy: SPEAr1310/40-miphy: Add binding information > > > SPEAr: misc: Add binding information > > > phy: SPEAr1310/40-miphy: Add phy driver for PCIe and SATA > > > SPEAr13XX: Add binding information for PCIe controller > > > SPEAr13XX: dts: Add PCIe node information > > > pcie: SPEAr13xx: Add designware wrapper support > > > > > > .../devicetree/bindings/arm/spear-misc.txt | 9 + > > > .../devicetree/bindings/pci/spear13xx-pcie.txt | 14 + > > > .../devicetree/bindings/phy/st-spear1310-miphy.txt | 12 + > > > .../devicetree/bindings/phy/st-spear1340-miphy.txt | 11 + > > > MAINTAINERS | 6 + > > > arch/arm/boot/dts/spear1310-evb.dts | 4 + > > > arch/arm/boot/dts/spear1310.dtsi | 93 +++++- > > > arch/arm/boot/dts/spear1340-evb.dts | 4 + > > > arch/arm/boot/dts/spear1340.dtsi | 30 ++- > > > arch/arm/boot/dts/spear13xx.dtsi | 9 +- > > > arch/arm/configs/spear13xx_defconfig | 16 + > > > arch/arm/mach-spear/Kconfig | 4 + > > > arch/arm/mach-spear/include/mach/spear.h | 4 +- > > > arch/arm/mach-spear/spear1340.c | 127 +------ > > > arch/arm/mach-spear/spear13xx.c | 2 +- > > > drivers/clk/spear/spear1310_clock.c | 6 +- > > > drivers/clk/spear/spear1340_clock.c | 2 +- > > > drivers/pci/host/Kconfig | 8 + > > > drivers/pci/host/Makefile | 1 + > > > drivers/pci/host/pcie-spear13xx.c | 407 ++++++++++++++++++++ > > > drivers/phy/Kconfig | 12 + > > > drivers/phy/Makefile | 2 + > > > drivers/phy/phy-spear1310-miphy.c | 274 +++++++++++++ > > > drivers/phy/phy-spear1340-miphy.c | 300 ++++++++++++++ > > > 24 files changed, 1218 insertions(+), 139 deletions(-) create mode 100644 > > > Documentation/devicetree/bindings/arm/spear-misc.txt > > > create mode 100644 Documentation/devicetree/bindings/pci/spear13xx- > > > pcie.txt > > > create mode 100644 Documentation/devicetree/bindings/phy/st- > > > spear1310-miphy.txt > > > create mode 100644 Documentation/devicetree/bindings/phy/st- > > > spear1340-miphy.txt > > > create mode 100644 drivers/pci/host/pcie-spear13xx.c create mode 100644 > > > drivers/phy/phy-spear1310-miphy.c create mode 100644 drivers/phy/phy- > > > spear1340-miphy.c -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
